Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Moldable Mask: A Reusable, Hot Water Moldable, Additively Manufactured Mask to Be Used as an N95 Alternative.

ABSTRACT: There has been high demand for personal protective equipment (PPE) during the COVID-19 pandemic, especially N95 respirators. Unfortunately, at the early stage of the pandemic, the supply could not meet the demand for N95 respirators, leading to a shortage and unsafe reuse of this form of PPE. We developed the Moldable Mask to ease the demand for N95 respirators by creating a 3D-printed mask that uses a piece of N95 material as a filter. A sheet of N95 material could be used or one N95 respirator to be turned into two masks. The main feature of the mask is the ability to easily mold it in hot water to create a custom fit for each user. It can also be easily assembled at home with affordable materials. The final mask design was qualitatively fit tested on 13 subjects, with all subjects showing an improvement in fit with the hot water molding technique and 10 (77%) subjects passing the fit test. This shows that the Moldable Mask is a viable option for a safe, affordable N95 alternative when N95 mask supply is strained.

SUBMITTER: Martelly E

PROVIDER: S-EPMC8624460 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Influence of solidification structure on austenite to martensite transformation in additively manufactured hot-work tool steels.

Project description:The microstructure of a hot-work tool steel additively manufactured using laser powder-bed fusion (L-PBF), and its response to post heat treatment, is studied in detail by microstructure characterization and computational thermodynamics and kinetics. The high solidification and cooling rates during the L-PBF process lead to suppression of δ-ferrite and instead solidification of an austenite phase directly containing a cellular substructure where the alloying elements have segregated to the inter-cellular regions and where solidification carbides have formed in the cell junctions. The austenite is then partly decomposed into martensite at lower temperatures. The micro-segregation can be predicted by reducing the complex solidification behavior to a diffusion problem in one dimension enabling detailed comparisons with the measured segregation profiles quantified at a nanometer scale. Martensite start temperature (Ms) calculations along the spatially varying composition show that the Ms temperature decreases in the inter-cellular regions where austenite is observed. The network of austenite in the as-built microstructure can be understood from the combined influence of the composition dependence of the Ms temperature in relation to the build plate temperature and the mechanical stabilization of the small-sized austenite regions. This work demonstrates the power of computational tools based on computational thermodynamics and kinetics for designing tool steels for additive manufacturing by predictions of the steel's response to the L-PBF process and post heat treatments.

| S-EPMC10088486 | biostudies-literature

Training and Fit Testing of Health Care Personnel for Reusable Elastomeric Half-Mask Respirators Compared With Disposable N95 Respirators.

Project description: Not available

| S-EPMC7097838 | biostudies-literature

The Hardness of Additively Manufactured Alloys.

Project description:The rapidly evolving field of additive manufacturing requires a periodic assessment of the progress made in understanding the properties of metallic components. Although extensive research has been undertaken by many investigators, the data on properties such as hardness from individual publications are often fragmented. When these published data are critically reviewed, several important insights that cannot be obtained from individual papers become apparent. We examine the role of cooling rate, microstructure, alloy composition and post process heat treatment on the hardness of additively manufactured aluminum, nickel, titanium and iron base components. Hardness data for steels and aluminum alloys processed by additive manufacturing and welding are compared to understand the relative roles of manufacturing processes. Furthermore, the findings are useful to determine if a target hardness is easily attainable either by adjusting AM process variables or through appropriate alloy selection.

| S-EPMC6266262 | biostudies-other

Microscale residual stresses in additively manufactured stainless steel.

Project description:Additively manufactured (AM) metallic materials commonly possess substantial microscale internal stresses that manifest as intergranular and intragranular residual stresses. However, the impact of these residual stresses on the mechanical behaviour of AM materials remains unexplored. Here we combine in situ synchrotron X-ray diffraction experiments and computational modelling to quantify the lattice strains in different families of grains with specific orientations and associated intergranular residual stresses in an AM 316L stainless steel under uniaxial tension. We measure pronounced tension-compression asymmetries in yield strength and work hardening for as-printed stainless steel, and show they are associated with back stresses originating from heterogeneous dislocation distributions and resultant intragranular residual stresses. We further report that heat treatment relieves microscale residual stresses, thereby reducing the tension-compression asymmetries and altering work-hardening behaviour. This work establishes the mechanistic connections between the microscale residual stresses and mechanical behaviour of AM stainless steel.

| S-EPMC6761200 | biostudies-literature

Biomechanical validation of additively manufactured artificial femoral bones.

Project description:Replicating the mechanical behavior of human bones, especially cancellous bone tissue, is challenging. Typically, conventional bone models primarily consist of polyurethane foam surrounded by a solid shell. Although nearly isotropic foam components have mechanical properties similar to cancellous bone, they do not represent the anisotropy and inhomogeneity of bone architecture. To consider the architecture of bone, models were developed whose core was additively manufactured based on CT data. This core was subsequently coated with glass fiber composite. Specimens consisting of a gyroid-structure were fabricated using fused filament fabrication (FFF) techniques from different materials and various filler levels. Subsequent compression tests showed good accordance between the mechanical behavior of the printed specimens and human bone. The unidirectional fiberglass composite showed higher strength and stiffness than human cortical bone in 3-point bending tests, with comparable material behaviors being observed. During biomechanical investigation of the entire assembly, femoral prosthetic stems were inserted into both artificial and human bones under controlled conditions, while recording occurring forces and strains. All of the artificial prototypes, made of different materials, showed analogous behavior to human bone. In conclusion, it was shown that low-cost FFF technique can be used to generate valid bone models and selectively modify their properties by changing the infill.

| S-EPMC9354338 | biostudies-literature

Continuous Nanoprecipitation of Polycaprolactone in Additively Manufactured Micromixers.

Project description:The polymeric ouzo effect is an energy-efficient and robust method to create nanoparticles with biologically degradable polymers. Usually, a discontinuous or semi-continuous process is employed due to its low technical effort and the fact that the amount of dispersions needed in a laboratory is relatively small. However, the number of particles produced in this method is not enough to make this process economically feasible. Therefore, it is necessary to improve the productivity of the process and create a controllable and robust continuous process with the potential to control parameters, such as the particle size or surface properties. In this study, nanoparticles were formulated from polycaprolactone (PCL) in a continuous process using additively manufactured micromixers. The main goal was to be able to exert control on the particle parameters in terms of size and zeta potential. The results showed that particle size could be adjusted in the range of 130 to 465 nm by using different flow rates of the organic and aqueous phase and varying concentrations of PCL dissolved in the organic phase. Particle surface charge was successfully shifted from a slightly negative potential of -14.1 mV to a negative, positive, or neutral value applying the appropriate surfactant. In summary, a continuous process of nanoprecipitation not only improves the cost of the method, but furthermore increases the control over the particle's parameters.

| S-EPMC9032806 | biostudies-literature

Mechanical Properties of Additively Manufactured Thick Honeycombs.

Project description:Honeycombs resemble the structure of a number of natural and biological materials such as cancellous bone, wood, and cork. Thick honeycomb could be also used for energy absorption applications. Moreover, studying the mechanical behavior of honeycombs under in-plane loading could help understanding the mechanical behavior of more complex 3D tessellated structures such as porous biomaterials. In this paper, we study the mechanical behavior of thick honeycombs made using additive manufacturing techniques that allow for fabrication of honeycombs with arbitrary and precisely controlled thickness. Thick honeycombs with different wall thicknesses were produced from polylactic acid (PLA) using fused deposition modelling, i.e., an additive manufacturing technique. The samples were mechanically tested in-plane under compression to determine their mechanical properties. We also obtained exact analytical solutions for the stiffness matrix of thick hexagonal honeycombs using both Euler-Bernoulli and Timoshenko beam theories. The stiffness matrix was then used to derive analytical relationships that describe the elastic modulus, yield stress, and Poisson's ratio of thick honeycombs. Finite element models were also built for computational analysis of the mechanical behavior of thick honeycombs under compression. The mechanical properties obtained using our analytical relationships were compared with experimental observations and computational results as well as with analytical solutions available in the literature. It was found that the analytical solutions presented here are in good agreement with experimental and computational results even for very thick honeycombs, whereas the analytical solutions available in the literature show a large deviation from experimental observation, computational results, and our analytical solutions.

| S-EPMC5509007 | biostudies-other

Further Studies into Crack Growth in Additively Manufactured Materials.

Project description:Understanding and characterizing crack growth is central to meeting the damage tolerance and durability requirements delineated in USAF Structures Bulletin EZ-SB-19-01 for the utilization of additive manufacturing (AM) in the sustainment of aging aircraft. In this context, the present paper discusses the effect of different AM processes, different build directions, and the variability in the crack growth rates related to AM Ti-6Al-4V, AM Inconel 625, and AM 17-4 PH stainless steel. This study reveals that crack growth in these three AM materials can be captured using the Hartman-Schijve crack growth equation and that the variability in the various da/dN versus ?K curves can be modeled by allowing the terms ?Kthr and A to vary. It is also shown that for the AM Ti-6AL-4V processes considered, the variability in the cyclic fracture toughness appears to be greatest for specimens manufactured using selective layer melting (SLM).

| S-EPMC7287604 | biostudies-literature

Monotonic load datasets for additively manufactured thermoplastic reinforced composites.

Project description:In additive manufacturing (AM), thermoplastic components made by fused deposition modeling (FDM) offer low strength and stiffness, as required for fully functional and load-bearing parts. Composite materials are a practical solution to improve mechanical properties [1,2]. A new technology to reinforce thermoplastics with continuous fibers has been developed recently by Markforged [3]. It introduces continuous fiber to reinforce a thermoplastic matrix, thus, taking static mechanical performance close to Aluminum alloys [4]. These printers for continuous fiber reinforced thermoplastic composites (CFRTPC) have taken this technology to a whole new level in terms of mechanical properties and efficient production. Mechanical properties under monotonic load were studied for different kinds of printing configurations. Tensile monotonic tests under controlled displacement were performed until rupture. Raw data showing tensile monotonic behavior provides the researchers with the ability to perform data fitting, to validate more advanced constitutive models, or to perform a further interpretation of the data, among others. Data is presented here as plain text files without any analysis. A preliminary data analysis has been published already in [5]. The text files contain information about time, displacement, and force. The data is useful for design engineers and researchers involved with AM.

| S-EPMC7056620 | biostudies-literature

Non-oxide precipitates in additively manufactured austenitic stainless steel.

Project description:Precipitates in an austenitic stainless steel fabricated via any Additive Manufacturing (AM), or 3D printing, technique have been widely reported to be only Mn-Si-rich oxides. However, via Transmission Electron Microscopy (TEM) studies on a 316L stainless steel, we show that non-oxide precipitates (intermetallics, sulfides, phosphides and carbides) can also form when the steel is fabricated via Laser Metal Deposition (LMD)-a directed energy deposition-type AM technique. An investigation into their origin is conducted with support from precipitation kinetics and finite element heat transfer simulations. It reveals that non-oxide precipitates form during solidification/cooling at temperatures ≥ 0.75Tm (melting point) and temperature rates ≤ 105 K/s, which is the upper end of the maximum rates encountered during LMD but lower than those encountered during Selective Laser Melting (SLM)-a powder-bed type AM technique. Consequently, non-oxide precipitates should form during LMD, as reported in this work, but not during SLM, in consistency with existing literature.

| S-EPMC8128905 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data