Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

ZrSnO₄: A Solution-Processed Robust Electron Transport Layer of Efficient Planar-Heterojunction Perovskite Solar Cells.

ABSTRACT: A robust electron transport layer (ETL) is an essential component in planar-heterojunction perovskite solar cells (PSCs). Herein, a sol-gel-driven ZrSnO₄ thin film is synthesized and its optoelectronic properties are systematically investigated. The optimized processing conditions for sol-gel synthesis produce a ZrSnO₄ thin film that exhibits high optical transmittance in the UV-Vis-NIR range, a suitable conduction band maximum, and good electrical conductivity, revealing its potential for application in the ETL of planar-heterojunction PSCs. Consequently, the ZrSnO₄ ETL-based devices deliver promising power conversion efficiency (PCE) up to 19.05% from CH₃NH₃PbI₃-based planar-heterojunction devices. Furthermore, the optimal ZrSnO₄ ETL also contributes to decent long-term stability of the non-encapsulated device for 360 h in an ambient atmosphere (T~25 °C, RH~55%,), suggesting great potential of the sol-gel-driven ZrSnO₄ thin film for a robust solution-processed ETL material in high-performance PSCs.

SUBMITTER: Choi J

PROVIDER: S-EPMC8625985 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Low-Temperature Processed TiOx Electron Transport Layer for Efficient Planar Perovskite Solar Cells.

Project description:The most frequently used n-type electron transport layer (ETL) in high-efficiency perovskite solar cells (PSCs) is based on titanium oxide (TiO2) films, involving a high-temperature sintering (>450 °C) process. In this work, a dense, uniform, and pinhole-free compact titanium dioxide (TiOx) film was prepared via a facile chemical bath deposition process at a low temperature (80 °C), and was applied as a high-quality ETL for efficient planar PSCs. We tested and compared as-deposited substrates sintered at low temperatures (< 150 °C) and high temperatures (> 450 °C), as well as their corresponding photovoltaic properties. PSCs with a high-temperature treated TiO2 compact layer (CL) exhibited power conversion efficiencies (PCEs) as high as 15.50%, which was close to those of PSCs with low-temperature treated TiOx (14.51%). This indicates that low-temperature treated TiOx can be a potential ETL candidate for planar PSCs. In summary, this work reports on the fabrication of low-temperature processed PSCs, and can be of interest for the design and fabrication of future low-cost and flexible solar modules.

| S-EPMC7559000 | biostudies-literature

Room-Temperature-Processed Amorphous Sn-In-O Electron Transport Layer for Perovskite Solar Cells.

Project description:We report amorphous tin-indium-oxide (TIO, Sn fraction: >50 atomic percentage (at%)) thin films as a new electron transport layer (ETL) of perovskite solar cells (PSCs). TIO thin films with Sn fraction of 52, 77, 83, 92, and 100 at% were grown on crystalline indium-tin-oxide (ITO, Sn fraction: ~10 at%) thin films, a common transparent conducting oxide, by co-sputtering In2O3 and SnO2 at room temperature. The energy band structures of the amorphous TIO thin films were determined from the optical absorbance and the ultraviolet photoelectron spectra. All the examined compositions are characterized by a conduction band edge lying between that of ITO and that of perovskite (here, methylammonium lead triiodide), indicating that TIO is a potentially viable ETL of PSCs. The photovoltaic characteristics of the TIO-based PSCs were evaluated. Owing mainly to the highest fill factor and open circuit voltage, the optimal power conversion efficiency was obtained for the 77 at%-Sn TIO ETL with TiCl4 treatment. The fill factor and the open circuit voltage changes with varying the Sn fraction, despite similar conduction band edges. We attribute these differences to the considerable changes in the electrical resistivity of the TIO ETL. This would have a significant effect on the shunt and/or the series resistances. The TIO ETL can be continuously grown on an ITO TCO in a chamber, as ITO and TIO are composed of identical elements, which would help to reduce production time and costs.

| S-EPMC6981739 | biostudies-literature

Efficient Planar Perovskite Solar Cells Using Passivated Tin Oxide as an Electron Transport Layer.

Project description:Planar perovskite solar cells using low-temperature atomic layer deposition (ALD) of the SnO2 electron transporting layer (ETL), with excellent electron extraction and hole-blocking ability, offer significant advantages compared with high-temperature deposition methods. The optical, chemical, and electrical properties of the ALD SnO2 layer and its influence on the device performance are investigated. It is found that surface passivation of SnO2 is essential to reduce charge recombination at the perovskite and ETL interface and show that the fabricated planar perovskite solar cells exhibit high reproducibility, stability, and power conversion efficiency of 20%.

| S-EPMC6010698 | biostudies-literature

Amino-functionalized conjugated polymer electron transport layers enhance the UV-photostability of planar heterojunction perovskite solar cells.

Project description:In this study, for the first time, we report a solution-processed amino-functionalized copolymer semiconductor (PFN-2TNDI) with a conjugated backbone composed of fluorine, naphthalene diimide, and thiophene spacers as the electron transporting layer (ETL) in n-i-p planar structured perovskite solar cells. Using this copolymer semiconductor in conjunction with a planar n-i-p heterojunction, we achieved an unprecedented efficiency of ?16% under standard illumination test conditions. More importantly, the perovskite devices using this polymer ETL have shown good stability under constant ultra violet (UV) light soaking during 3000 h of accelerated tests. Various advanced spectroscopic characterizations, including ultra-fast spectroscopy, ultra-violet photoelectron spectroscopy and electronic impedance spectroscopy, elucidate that the interaction between the functional polymer ETL and the perovskite layer plays a critical role in trap passivation and thus, the device UV-photostability. We expect that these results will boost the development of low temperature solution-processed organic ETL materials, which is essential for the commercialization of high-performance and stable, flexible perovskite solar cells.

| S-EPMC5618109 | biostudies-literature

Low-Temperature Plasma-Assisted Atomic-Layer-Deposited SnO2 as an Electron Transport Layer in Planar Perovskite Solar Cells.

Project description:In this work, we present an extensive characterization of plasma-assisted atomic-layer-deposited SnO2 layers, with the aim of identifying key material properties of SnO2 to serve as an efficient electron transport layer in perovskite solar cells (PSCs). Electrically resistive SnO2 films are fabricated at 50 °C, while a SnO2 film with a low electrical resistivity of 1.8 × 10-3 ? cm, a carrier density of 9.6 × 1019 cm-3, and a high mobility of 36.0 cm2/V s is deposited at 200 °C. Ultraviolet photoelectron spectroscopy indicates a conduction band offset of ?0.69 eV at the 50 °C SnO2/Cs0.05(MA0.17FA0.83)0.95Pb(I2.7Br0.3) interface. In contrast, a negligible conduction band offset is found between the 200 °C SnO2 and the perovskite. Surprisingly, comparable initial power conversion efficiencies (PCEs) of 17.5 and 17.8% are demonstrated for the champion cells using 15 nm thick SnO2 deposited at 50 and 200 °C, respectively. The latter gains in fill factor but loses in open-circuit voltage. Markedly, PSCs using the 200 °C compact SnO2 retain their initial performance at the maximum power point over 16 h under continuous one-sun illumination in inert atmosphere. Instead, the cell with the 50 °C SnO2 shows a decrease in PCE of approximately 50%.

| S-EPMC6137428 | biostudies-literature

Efficient perovskite light-emitting diodes based on a solution-processed tin dioxide electron transport layer.

Project description:To achieve high-performance perovskite light-emitting diodes (PeLEDs), an appropriate functional layer beneath the perovskite emissive layer is significantly important to modulate the morphology of the perovskite film and to facilitate charge injection and transport in the device. Herein, for the first time, we report efficient n-i-p structured PeLEDs using solution-processed SnO2 as an electron transport layer. Three-dimensional perovskites, such as CH(NH2)2PbI3 and CH3NH3PbI3, are found to be more chemically compatible with SnO2 than with commonly used ZnO. In addition, SnO2 shows good transparency, excellent morphology and suitable energy levels. These properties make SnO2 a promising candidate in both three- and low-dimensional PeLEDs, among which a high external quantum efficiency of 7.9% has been realized. Furthermore, interfacial materials that are widely used to improve the device performances of ZnO-based PeLEDs are also applied on SnO2-based PeLEDs and their effects have been systematically studied. In contrast to ZnO, SnO2 modified by these interfacial materials shows detrimental effects due to photoluminescence quenching.

| S-EPMC6333275 | biostudies-literature

TiO<sub>2</sub> Phase Junction Electron Transport Layer Boosts Efficiency of Planar Perovskite Solar Cells.

Project description:In the planar perovskite solar cells (PSCs), the electron transport layer (ETL) plays a critical role in electron extraction and transport. Widely utilized TiO2 ETLs suffer from the low conductivity and high surface defect density. To address these problems, for the first time, two types of ETLs based on TiO2 phase junction are designed and fabricated distributed in the opposite space, namely anatase/rutile and rutile/anatase. The champion efficiency of PSCs based on phase junction ETL is over 15%, which is much higher than that of cells with single anatase (9.8%) and rutile (11.8%) TiO2 as ETL. The phase junction based PSCs also demonstrated obviously reduced hysteresis. The enhanced performance is discussed and mainly ascribed to the excellent capability of carrier extraction, defect passivation, and reduced recombination at the ETL/perovskite interface. This work opens a new phase junction ETL strategy toward interfacial energy band manipulation for improved PSC performance.

| S-EPMC5867052 | biostudies-literature

Planar heterojunction perovskite solar cells with superior reproducibility.

Project description:Perovskite solar cells (PeSCs) have been considered one of the competitive next generation power sources. To date, light-to-electric conversion efficiencies have rapidly increased to over 10%, and further improvements are expected. However, the poor device reproducibility of PeSCs ascribed to their inhomogeneously covered film morphology has hindered their practical application. Here, we demonstrate high-performance PeSCs with superior reproducibility by introducing small amounts of N-cyclohexyl-2-pyrrolidone (CHP) as a morphology controller into N,N-dimethylformamide (DMF). As a result, highly homogeneous film morphology, similar to that achieved by vacuum-deposition methods, as well as a high PCE of 10% and an extremely small performance deviation within 0.14% were achieved. This study represents a method for realizing efficient and reproducible planar heterojunction (PHJ) PeSCs through morphology control, taking a major step forward in the low-cost and rapid production of PeSCs by solving one of the biggest problems of PHJ perovskite photovoltaic technology through a facile method.

| S-EPMC4223662 | biostudies-other

Room Temperature Processed Double Electron Transport Layers for Efficient Perovskite Solar Cells.

Project description:Zinc Oxide (ZnO) has been regarded as a promising electron transport layer (ETL) in perovskite solar cells (PSCs) owing to its high electron mobility. However, the acid-nonresistance of ZnO could destroy organic-inorganic hybrid halide perovskite such as methylammonium lead triiodide (MAPbI3) in PSCs, resulting in poor power conversion efficiency (PCE). It is demonstrated in this work that Nb2O5/ZnO films were deposited at room temperature with RF magnetron sputtering and were successfully used as double electron transport layers (DETL) in PSCs due to the energy band matching between Nb2O5 and MAPbI3 as well as ZnO. In addition, the insertion of Nb2O5 between ZnO and MAPbI3 facilitated the stability of the perovskite film. A systematic investigation of the ZnO deposition time on the PCE has been carried out. A deposition time of five minutes achieved a ZnO layer in the PSCs with the highest power conversion efficiency of up to 13.8%. This excellent photovoltaic property was caused by the excellent light absorption property of the high-quality perovskite film and a fast electron extraction at the perovskite/DETL interface.

| S-EPMC7911782 | biostudies-literature

A composite light-harvesting layer from photoactive polymer and halide perovskite for planar heterojunction solar cells.

Project description:A new route for fabrication of photoactive materials in organic-inorganic hybrid solar cells is presented in this report. Photoactive materials by blending a semiconductive conjugated polymer with an organolead halide perovskite were fabricated for the first time. The composite active layer was then used to make planar heterojunction solar cells with the PCBM film as the electron-acceptor. Photovoltaic performance of solar cells was investigated by J-V curves and external quantum efficiency spectra. We demonstrated that the incorporation of the conjugated photoactive polymer into organolead halide perovskites did not only contribute to the generation of charges, but also enhance stability of solar cells by providing a barrier protection to halide perovskites. It is expected that versatile of conjugated semi-conductive polymers and halide perovskites in photoactive properties enables to create various combinations, forming composites with advantages offered by both types of photoactive materials.

| S-EPMC4944171 | biostudies-literature