3D-Printed Porous Magnetic Carbon Materials Derived from Metal-Organic Frameworks.
Ontology highlight
ABSTRACT:
SUBMITTER: Cherevko AI
PROVIDER: S-EPMC8626018 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Magnetic nitrogen-doped porous carbon (MNPC) has been prepared via self-catalytic pyrolysis of bimetallic metal-organic frameworks (MOFs). The as-obtained MNPC showed favorable features for antibiotics adsorption such as high specific surface area (871 m² g-1), high pore volume (0.75 cm³ g-1), porous structure, good graphitization degree, and rich N-doping. Moreover, the MNPC has magnetic properties due to the Co species, which is embedded with a high dispersion, so the absorbent can be easily separated. Based on the above excellent characteristics, the MNPC was used as the absorbent for norfloxacin (NOR) removal. The experimental maximum NOR adsorption capacity of MNPC was 55.12 mg g-1 at 298.15 K and a pH of 6.0 with an initial NOR concentration of 50 mg L-1. The data analysis of the kinetics revealed that the experimental data of NOR uptakes versus time agreed with the pseudo-second order model. The isotherm data analysis revealed the favorable application of the Freundlich model. Based on the adsorption results over a wide range of conditions, the dominant adsorption mechanisms were found to be pore-filling, electrostatic interaction, and the H-bond.
| S-EPMC6165088 | biostudies-other
Project description:Porous organic frameworks (POFs), a general term for covalent-organic frameworks (COFs), covalent triazine frameworks (CTFs), porous aromatic frameworks (PAFs), etc., are constructed from organic building monomers with strong covalent bonds and have generated great interest among researchers. The remarkable features, such as large surface areas, permanent porosity, high thermal and chemical stability, and convenient functionalization, promote the great potential of POFs in diverse applications. A critical overview of the important development in the design and synthesis of COFs, CTFs, and PAFs is provided and their state-of-the-art applications in analytical chemistry are discussed. POFs and their functional composites have been explored as advanced materials in "turn-off" or "turn-on" fluorescence detection and novel stationary phases for chromatographic separation, as well as a promising adsorbent for sample preparation methods. In addition, the prospects for the synthesis and utilization of POFs in analytical chemistry are also presented. These prospects can offer an outlook and reference for further study of the applications of POFs.
| S-EPMC6299720 | biostudies-literature
Project description:Conductive porous materials having a high surface reactivity offer great promise for a broad range of applications. However, a general and scalable synthesis of such materials remains challenging. In this work, the facile synthesis of catalytic metal nanoparticles (NPs) embedded in 2D metal-organic frameworks (MOFs) is reported as highly active and conductive porous materials. After the assembly of 2D conductive MOFs (C-MOFs), i.e., Cu3(hexahydroxytriphenylene)2 [Cu3(HHTP)2], Pd or Pt NPs are functionalized within the cavities of C-MOFs by infiltration of metal ions and subsequent reduction. The unique structure of Cu3(HHTP)2 with a cavity size of 2 nm confines the bulk growth of metal NPs, resulting in ultra-small (?2 nm) and well-dispersed metal NPs loaded in 2D C-MOFs. The Pd or Pt NPs-loaded Cu3(HHTP)2 exhibits remarkably improved NO2 sensing performance at room temperature due to the high reactivity of catalytic metal NPs and the high porosity of C-MOFs. The catalytic effect of Pd and Pt NPs on NO2 sensing of Cu3(HHTP)2, in terms of reaction rate kinetics and activation energy, is demonstrated.
| S-EPMC6839632 | biostudies-literature
Project description:The binding energy of an electron in a material is a fundamental characteristic, which determines a wealth of important chemical and physical properties. For metal-organic frameworks this quantity is hitherto unknown. We present a general approach for determining the vacuum level of porous metal-organic frameworks and apply it to obtain the first ionization energy for six prototype materials including zeolitic, covalent, and ionic frameworks. This approach for valence band alignment can explain observations relating to the electrochemical, optical, and electrical properties of porous frameworks.
| S-EPMC3946036 | biostudies-literature
Project description:Supercapacitors fabricated by 3D porous carbon frameworks, such as graphene- and carbon nanotube (CNT)-based aerogels, have been highly attractive due to their various advantages. However, their high cost along with insufficient yield has inhibited their large-scale applications. Here we have demonstrated a facile and easily scalable approach for large-scale preparing novel 3D nitrogen-containing porous carbon frameworks using ultralow-cost commercial cotton. Electrochemical performance suggests that the optimal nitrogen-containing cotton-derived carbon frameworks with a high nitrogen content (12.1 mol%) along with low surface area 285 m(2) g(-1) present high specific capacities of the 308 and 200 F g(-1) in KOH electrolyte at current densities of 0.1 and 10 A g(-1), respectively, with very limited capacitance loss upon 10,000 cycles in both aqueous and gel electrolytes. Moreover, the electrode exhibits the highest capacitance up to 220 F g(-1) at 0.1 A g(-1) and excellent flexibility (with negligible capacitance loss under different bending angles) in the polyvinyl alcohol/KOH gel electrolyte. The observed excellent performance competes well with that found in the electrodes of similar 3D frameworks formed by graphene or CNTs. Therefore, the ultralow-cost and simply strategy here demonstrates great potential for scalable producing high-performance carbon-based supercapacitors in the industry.
| S-EPMC4607951 | biostudies-literature
Project description:Sodium-ion hybrid capacitors (SIHCs) in principle can utilize the advantages of batteries and supercapacitors and satisfy the cost demand of large-scale energy storage systems, but the sluggish kinetics and low capacities of its anode and cathode are yet to be overcome. Here, a strategy is reported to realize high-performance dual-carbon SIHCs using 3D porous graphitic carbon cathode and anode materials derived from metal-azolate framework-6s (MAF-6s). First, MAF-6s, with or without urea loading, are pyrolyzed to synthesize MAF-derived carbons (MDCs). Then, cathode materials are synthesized via the controlled KOH-assisted pyrolysis of MDCs (K-MDCs). K-MDCs, 3D graphitic carbons, resulting in a record-high surface area (5214 m2 g-1 ) being ≈four-fold higher than pristine MAF-6, oxygen-doped sites for high capacity, rich mesopores affording fast ion transport, and high capacity retention over 5000 charge/discharge cycles. Moreover, 3D porous MDC anode materials are synthesized from N-containing MAF-6 and exhibited to allow cycle stability over 5000 cycles. Furthermore, dual-carbon MDC//K-MDC SIHCs with different loadings (3 to 6 mg cm-2 ) are demonstrated to achieve high energy densities exceeding those of sodium-ion batteries and supercapacitors. Additionally, it allows an ultrafast-chargeable high power density of 20000 W kg-1 and robust cycle stability overcoming those of a typical battery.
| S-EPMC10460885 | biostudies-literature
Project description:Porous structures offer highly accessible surfaces and rich pores, which facilitate the exposure of numerous active sites for photocatalytic reactions, leading to excellent performances. Recently, metal-organic frameworks (MOFs) have been considered ideal precursors for well-designed semiconductors with porous structures and/or heterostructures, which have shown enhanced photocatalytic activities. In this review, we summarize the recent development of porous structures, such as metal oxides and metal sulfides, and their heterostructures, derived from MOF-based materials as catalysts for various light-driven energy-/environment-related reactions, including water splitting, CO2 reduction, organic redox reaction, and pollution degradation. A summary and outlook section is also included.
| S-EPMC6325097 | biostudies-literature
Project description:Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.
| S-EPMC9307687 | biostudies-literature
Project description:Metal-organic frameworks (MOFs) are a class of microporous materials that have been highlighted with fast and selective sorption of gas molecules; however, they are at least partially unstable in the scale-up process. Here, we report a rational shaping of MOFs in a scalable architecture of fiber sorbent. The long-standing stability challenge of MOFs was resolved by using stable metal oxide precursors that are subject to controlled surface oxide dissolution-growth chemistry during the Mg-based MOF synthesis. Highly uniform MOF crystals are synthesized along with the open-porous fiber sorbents networks, showing unprecedented cyclic CO2 capacities in both flue gas and direct air capture (DAC) conditions. The same chemistry enables an in situ flow synthesis of Mg-MOF fiber sorbents, providing a scalable pathway for MOF synthesis in an inert condition with minimal handling steps. This modular approach can serve both as a reaction stage for enhanced MOF fiber sorbent synthesis and as a "process-ready" separation device.
| S-EPMC8397359 | biostudies-literature
Project description:Efficient charge storage is a key requirement for a range of applications, including energy storage devices and catalysis. Metal-organic frameworks are potential materials for efficient charge storage due to their self-supported three-dimensional design. MOFs are high surface area materials made up of coordination of appropriate amounts of metal ions and organic linkers, hence used in various applications. Yet, creating an effective MOF nanostructure with reduced random crystal formation continues to be a difficult task. The energy efficiency and electrochemical yield of bulk electrodes are improved in this study by demonstrating an effective technique for growing MOFs over a conducting substrate utilizing electrodeposition. An exceptionally stable asymmetric supercapacitor is created when activated carbon cloth is combined with the resulting MOF structure that was directly synthesized via an electrochemical method resulting in 97% stability over 5k cycles which is higher than conventional processes. High performance in supercapacitors is ensured by this practical approach for producing MOF electrodes, making it a suitable structure for effective charge storage.
| S-EPMC11316736 | biostudies-literature