Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrasound-excited hydrogen radical from NiFe layered double hydroxide for preparation of ultrafine supported Ru nanocatalysts in hydrogen storage of N-ethylcarbazole.

ABSTRACT: Highly active Ru nanoparticles (Ru NPs) supported on NiFe layered double hydroxide (Ru/NiFe-LDH) are prepared easily using ultrasound-assisted reduction method without chemical reductants and stabilizers. The plentiful hydroxyls on NiFe-LDH are excited into hydrogen radicals (H) under the action of ultrasound for reducing Ru³⁺ to Ru⁰. Ru NPs with an average particle size of 1.26 nm highly disperse on the mesopore-like surface of NiFe-LDH, which improve the catalytic performance for N-ethylcarbazole (NEC) hydrogenation. The experimental results show that 5Ru/NiFe-LDH-300-60 exhibits the best catalytic performance with 100% conversion of NEC, 98.88% yield of dodecahydro-N-ethylcarbazole (12H-NEC) and 5.77 wt% mass hydrogen storage capacity under the reaction conditions of 110 ℃, 6 MPa and m_Ru:m_NEC = 0.15 wt% for 80 min. The kinetics study shows that the apparent activation energy is only 25.15 kJ/mol, which is the lowest in the reported literatures. Ru complexes with O-contained groups on NiFe-LDH, improving the catalytic stability in NEC hydrogenation.

SUBMITTER: Liu X

PROVIDER: S-EPMC8637643 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

3D-printed NiFe-layered double hydroxide pyramid electrodes for enhanced electrocatalytic oxygen evolution reaction.

Project description:Electrochemical water splitting has been considered one of the most promising methods of hydrogen production, which does not cause environmental pollution or greenhouse gas emissions. Oxygen evolution reaction (OER) is a significant step for highly efficient water splitting because OER involves the four electron transfer, overcoming the associated energy barrier that demands a potential greater than that required by hydrogen evolution reaction. Therefore, an OER electrocatalyst with large surface area and high conductivity is needed to increase the OER activity. In this work, we demonstrated an effective strategy to produce a highly active three-dimensional (3D)-printed NiFe-layered double hydroxide (LDH) pyramid electrode for OER using a three-step method, which involves direct-ink-writing of a graphene pyramid array and electrodeposition of a copper conducive layer and NiFe-LDH electrocatalyst layer on printed pyramids. The 3D pyramid structures with NiFe-LDH electrocatalyst layers increased the surface area and the active sites of the electrode and improved the OER activity. The overpotential (η) and exchange current density (i0) of the NiFe-LDH pyramid electrode were further improved compared to that of the NiFe-LDH deposited Cu (NiFe-LDH/Cu) foil electrode with the same base area. The 3D-printed NiFe-LDH electrode also exhibited excellent durability without potential decay for 60 h. Our 3D printing strategy provides an effective approach for the fabrication of highly active, stable, and low-cost OER electrocatalyst electrodes.

| S-EPMC8748972 | biostudies-literature

Cu2O Photocathode for Low Bias Photoelectrochemical Water Splitting Enabled by NiFe-Layered Double Hydroxide Co-Catalyst.

Project description:Layered double hydroxides (LDHs) are bimetallic hydroxides that currently attract considerable attention as co-catalysts in photoelectrochemical (PEC) systems in view of water splitting under solar light. A wide spectrum of LDHs can be easily prepared on demand by tuning their chemical composition and structural morphology. We describe here the electrochemical growth of NiFe-LDH overlayers on Cu2O electrodes and study their PEC behavior. By using the modified Cu2O/NiFe-LDH electrodes we observe a remarkable seven-fold increase of the photocurrent intensity under an applied voltage as low as -0.2?V vs Ag/AgCl. The origin of such a pronounced effect is the improved electron transfer towards the electrolyte brought by the NiFe-LDH overlayer due to an appropriate energy level alignment. Long-term photostability tests reveal that Cu2O/NiFe-LDH photocathodes show no photocurrent loss after 40?hours of operation under light at -0.2?V vs Ag/AgCl low bias condition. These improved performances make Cu2O/NiFe-LDH a suitable photocathode material for low voltage H2 production. Indeed, after 8?hours of H2 production under -0.2?V vs Ag/AgCl the PEC cell delivers a 78% faradaic efficiency. This unprecedented use of Cu2O/NiFe-LDH as an efficient photocathode opens new perspectives in view of low biasd or self-biased PEC water splitting under sunlight illumination.

| S-EPMC4973245 | biostudies-literature

Fabrication of a Gold-Supported NiAlTi-Layered Double Hydroxide Nanocatalyst for Organic Transformations.

Project description:This work is mainly focused on the synthesis of an efficient and reusable heterogeneous Au/NiAlTi layered double hydroxide (LDH) nanocatalyst and its applications in the preparation of biologically important xanthene, 1,4-dihydropyridine, polyhydroquinoline, and 4H-pyran derivatives. NiAlTi LDH was designed hydrothermally and then gold was supported over the surface of LDH by using ion-exchange and NaBH4 reduction methods. The synthesized nanocatalyst was physicochemically characterized by X-ray diffractrometry, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy (TEM). The TEM images confirmed the support of gold nanoparticles over the surface of LDH with a size distribution of 7-9 nm. The well-characterized nanocatalyst was tested for the synthesis of biologically important xanthene, 1,4-dihydropyridine, polyhydroquinoline, and 4H-pyran derivatives. The advantages obtained were excellent yields in a lesser reaction time. Stability and reusability were also accessed; the catalyst was stable even after five cycles. High catalytic efficiency, easy fabrication, and recycling ability of Au/NiAlTi LDH make it a potential catalyst for the synthesis of xanthene, 1,4-dihydropyridine, polyhydroquinoline, and 4H-pyran derivatives.

| S-EPMC7513357 | biostudies-literature

A Facile Synthesis of NiFe-Layered Double Hydroxide and Mixed Metal Oxide with Excellent Microwave Absorption Properties.

Project description:Microwave-absorbing materials have attracted increased research interest in recent years because of their core roles in the fields of electromagnetic (EM) pollution precaution and information security. In this paper, microwave-absorbing material NiFe-layered double hydroxide (NiFe-LDH) was synthesized by a simple co-precipitation method and calcined for the fabrication of NiFe-mixed metal oxide (NiFe-MMO). The phase structure and micromorphology of the NiFe-LDH and NiFe-MMO were analyzed, and their microwave-absorbing properties were investigated with a vector network analyzer in 2-18 GHz. Both NiFe-LDH and NiFe-MMO possessed abundant interfaces and a low dielectric constant, which were beneficial to electromagnetic wave absorption, owing to the synergistic effect of multi-relaxation and impedance matching. The optimum reflection loss (RL) of NiFe-LDH and NiFe-MMO was -58.8 dB and -64.4 dB, respectively, with the thickness of 4.0 mm in the C band. This work demonstrates that LDH-based materials have a potential application in electromagnetic wave absorption.

| S-EPMC8398574 | biostudies-literature

Single Ru atoms with precise coordination on a monolayer layered double hydroxide for efficient electrooxidation catalysis.

Project description:The catalytic properties of single-atom catalysts (SACs) can be influenced largely by the chemical environment exerted by supports. Therefore, a precise location of the single atom is essential for understanding of the reaction mechanism and design of novel SACs. However, the preparation of SACs with a precise location remains a great challenge. Herein, we report a facile one-step method to synthesize single Ru atoms supported on a monolayer NiFe-layered double hydroxide (mono-NiFe). Detailed studies demonstrate that the single Ru atoms are not dispersed randomly in the LDH structure, but are uniquely located on the top of the Fe-metal atom of mono-NiFe via three oxygen atoms. Furthermore, these SACs prove to be highly active for the hydrazine electrooxidation reaction. Density functional theory calculations demonstrate that the single Ru atoms can stabilize the hydrazine electrooxidation intermediate with one unpaired electron (*N2H3 and *N2H), thus lowering the reaction barrier for the rate-determining step. Moreover, the loading amount of single Ru atoms with a precise location can even go up to 7.0 wt% without any aggregation.

| S-EPMC6335951 | biostudies-literature

One-Step Synthesis of NiFe Layered Double Hydroxide Nanosheet Array/N-Doped Graphite Foam Electrodes for Oxygen Evolution Reactions.

Project description:Developing cost-effective and highly efficient oxygen evolution reaction (OER) electrocatalysts is vital for the production of clean hydrogen by electrocatalytic water splitting. Here, three dimensional nickel-iron layered double hydroxide (NiFe LDH) nanosheet arrays are in-situ fabricated on self-supporting nitrogen doped graphited foam (NGF) via a one-step hydrothermal process under an optimized amount of urea. The as prepared NiFe LDH/NGF electrode exhibits a remarkable activity toward OER with a low onset overpotential of 233 mV and a Tafel slope of 59.4 mV dec-1 as well as a long-term durability. Such good performance is attributed to the synergy among the doping effect, the binder-free characteristic, and the architecture of the nanosheet array.

| S-EPMC6652109 | biostudies-literature

Hydrogen Isotope Exchange Catalyzed by Ru Nanocatalysts: Labelling of Complex Molecules Containing N-Heterocycles and Reaction Mechanism Insights.

Project description:Ruthenium nanocatalysis can provide effective deuteration and tritiation of oxazole, imidazole, triazole and carbazole substructures in complex molecules using D2 or T2 gas as isotopic sources. Depending on the substructure considered, this approach does not only represent a significant step forward in practice, with notably higher isotope uptakes, a broader substrate scope and a higher solvent applicability compared to existing procedures, but also the unique way to label important heterocycles using hydrogen isotope exchange. In terms of applications, the high incorporation of deuterium atoms, allows the synthesis of internal standards for LC-MS quantification. Moreover, the efficacy of the catalyst permits, even under subatmospheric pressure of T2 gas, the preparation of complex radiolabeled drugs owning high molar activities. From a fundamental point of view, a detailed DFT-based mechanistic study identifying undisclosed key intermediates, allowed a deeper understanding of C-H (and N-H) activation processes occurring at the surface of metallic nanoclusters.

| S-EPMC7187376 | biostudies-literature

Monometallic Cerium Layered Double Hydroxide Supported Pd-Ni Nanoparticles as High Performance Catalysts for Lignin Hydrogenolysis.

Project description:Monometallic cerium layered double hydroxides (Ce-LDH) supports were successfully synthesized by a homogeneous alkalization route driven by hexamethylenetetramine (HMT). The formation of the Ce-LDH was confirmed and its structural and compositional properties studied by XRD, SEM, XPS, iodometric analyses and TGA. HT-XRD, N2-sorption and XRF analyses revealed that by increasing the calcination temperature from 200 to 800 °C, the Ce-LDH material transforms to ceria (CeO2) in four distinct phases, i.e., the loss of intramolecular water, dehydroxylation, removal of nitrate groups and removal of sulfate groups. When loaded with 2.5 wt% palladium (Pd) and 2.5 wt% nickel (Ni) and calcined at 500 °C, the PdNi-Ce-LDH-derived catalysts strongly outperform the PdNi-CeO2 benchmark catalyst in terms of conversion as well as selectivity for the hydrogenolysis of benzyl phenyl ether (BPE), a model compound for the ?-O-4 ether linkage in lignin. The PdNi-Ce-LDH catalysts showed full selectivity towards phenol and toluene while the PdNi-CeO2 catalysts showed additional oxidation of toluene to benzoic acid. The highest BPE conversion was observed with the PdNi-Ce-LDH catalyst calcined at 600 °C, which could be related to an optimum in morphological and compositional characteristics of the support.

| S-EPMC7040693 | biostudies-literature

Atomic and electronic modulation of self-supported nickel-vanadium layered double hydroxide to accelerate water splitting kinetics.

Project description:Herein, ruthenium (Ru) and iridium (Ir) are introduced to tailor the atomic and electronic structure of self-supported nickel-vanadium (NiV) layered double hydroxide to accelerate water splitting kinetics, and the origin of high hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities are analyzed at atomic level. X-ray photoelectron spectroscopy and X-ray absorption near-edge structure spectroscopy studies reveal synergistic electronic interactions among Ni, V, and Ru (Ir) cations. Raman spectra and Fourier and wavelet transform analyses of the extended X-ray absorption fine structure indicate modulated local coordination environments around the Ni and V cations, and the existence of V vacancies. The Debye-Waller factor suggests a severely distorted octahedral V environment caused by the incorporation of Ru and Ir. Theoretical calculations further confirm that Ru or Ir doping could optimize the adsorption energy of intermediates in the Volmer and Heyrovsky steps for HER and accelerate the whole kinetic process for OER.

| S-EPMC6715676 | biostudies-literature

Enhancing Electrocatalytic Activity through Liquid-Phase Exfoliation of NiFe Layered Double Hydroxide Intercalated with Metal Phthalocyanines in the Presence of Graphene.

Project description:Earth-abundant transition-metal-based catalysts are attractive for alkaline water electrolysis. However, their catalytic properties are often limited by their poor electrical conductivity. Here, we present a strategy for enhancing the electrical conductivity of NiFe layered double hydroxide (LDH) in order to further improve its properties as an electrocatalyst for the oxygen evolution reaction (OER) in alkaline media. We show that NiFe LDH containing metal tetrasulfonate phthalocyanine in the interlayers between the NiFe oxide galleries can be coupled with graphene during liquid-phase exfoliation by taking advantage of their π-π stacking capabilities. A substantial enhancement in the electrocatalytic activity of NiFe LDH with respect to the OER was observed. Moreover, the activity and selectivity of the catalyst materials towards the oxygen reduction reaction were investigated, demonstrating that both the metal hydroxide layer and the interlayer species contribute to the electrocatalytic performance of the composite material.

| S-EPMC6899937 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data