Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thick Sintered Electrode Lithium-Ion Battery Discharge Simulations: Incorporating Lithiation-Dependent Electronic Conductivity and Lithiation Gradient Due to Charge Cycle.

ABSTRACT: In efforts to increase the energy density of lithium-ion batteries, researchers have attempted to both increase the thickness of battery electrodes and increase the relative fractions of active material. One system that has both of these attributes are sintered thick electrodes comprised of only active material. Such electrodes have high areal capacities, however, detailed understanding is needed of their transport properties, both electronic and ionic, to better quantify their limitations to cycling at higher current densities. In this report, efforts to improve models of the electrochemical cycling of sintered electrodes are described, in particular incorporation of matrix electronic conductivity which is dependent on the extent of lithiation of the active material and accounting for initial gradients in lithiation of active material in the electrode that develop as a consequence of transport limitations during charging cycles. Adding in these additional considerations to a model of sintered electrode discharge resulted in improved matching of experimental cell measurements.

SUBMITTER: Cai C

PROVIDER: S-EPMC8647443 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Probing transport limitations in thick sintered battery electrodes with neutron imaging.

Project description:Lithium-ion batteries have received significant research interest due to their advantages in energy and power density, which are important to enabling many devices. One route to further increase energy density is to fabricate thicker electrodes in the battery cell; however, careful consideration must be taken when designing electrodes as to how increasing the thickness impacts the multiscale and multiphase molecular transport processes, which can limit the overall battery operating power. Design of these electrodes necessitates probing the molecular processes when the battery cell undergoes electrochemical charge/discharge. One tool for in situ insights into the cell is neutron imaging, because neutron imaging can provide information of where electrochemical processes occur within the electrodes. In this manuscript, neutron imaging is applied to track the lithiation/delithiation processes within electrodes at different current densities for a full cell with a thick sintered Li4Ti5O12 anode and LiCoO2 cathode. The neutron imaging reveals that the molecular distribution of Li+ during discharge within the electrode is sensitive to the current density, or equivalently discharge rate. An electrochemical model provides additional insights into the limiting processes occurring within the electrodes. In particular, the impact of tortuosity and molecular transport in the liquid phase within the interstitial regions in the electrodes are considered, and the influence of tortuosity was shown to be highly sensitive to the current density. Qualitatively, the experimental results suggest that the electrodes behave consistent with the packed hard sphere approximation of Bruggeman tortuosity scaling, which indicates that the electrodes are largely mechanically intact but also that a design that incorporates tunable tortuosity could improve the performance of these types of electrodes.

| S-EPMC8739910 | biostudies-literature

Exploring Metastable Phases During Lithiation of Organic Battery Electrode Materials.

Project description:In this work, the Li-ion insertion mechanism in organic electrode materials is investigated through the lens of atomic-scale models based on first-principles theory. Starting with a structural analysis, the interplay of density functional theory with evolutionary and potential-mapping algorithms is used to resolve the crystal structure of the different (de)lithiated phases. These methods elucidate different lithiation reaction pathways and help to explore the formation of metastable phases and predict one- or multi-electron reactions, which are still poorly understood for organic intercalation electrodes. The cathode material dilithium 2,5-oxyterephthalate (operating at 2.6 V vs. Li/Li+) is investigated in depth as a case study, owing to its rich redox chemistry. When compared with recent experimental results, it is demonstrated that metastable phases with peculiar ring-ring molecular interactions are more likely to be controlling the redox reactions thermodynamics and consequently the battery voltage.

| S-EPMC9321076 | biostudies-literature

Sorting Lithium-Ion Battery Electrode Materials Using Dielectrophoresis.

Project description:Lithium-ion batteries (LIBs) are common in everyday life and the demand for their raw materials is increasing. Additionally, spent LIBs should be recycled to achieve a circular economy and supply resources for new LIBs or other products. Especially the recycling of the active material of the electrodes is the focus of current research. Existing approaches for recycling (e.g., pyro-, hydrometallurgy, or flotation) still have their drawbacks, such as the loss of materials, generation of waste, or lack of selectivity. In this study, we test the behavior of commercially available LiFePO4 and two types of graphite microparticles in a dielectrophoretic high-throughput filter. Dielectrophoresis is a volume-dependent electrokinetic force that is commonly used in microfluidics but recently also for applications that focus on enhanced throughput. In our study, graphite particles show significantly higher trapping than LiFePO4 particles. The results indicate that nearly pure fractions of LiFePO4 can be obtained with this technique from a mixture with graphite.

| S-EPMC10373188 | biostudies-literature

Swallowing Lithium Dendrites in All-Solid-State Battery by Lithiation with Silicon Nanoparticles.

Project description:Eliminating the uncontrolled growth of Li dendrite inside solid electrolytes is a critical tactic for the performance improvement of all-solid-state Li batteries (ASSLBs). Herein, a strategy to swallow and anchor Li dendrites by filling Si nanoparticles into the solid electrolytes by the lithiation effect with Li dendrites is proposed. It is found that Si nanoparticles can lithiate with the adjacent Li dendrites which have a strong electron transport ability. Such effect can inhibit the formation of Li dendrites at the interface of Li anode, and also swallow the tip Li inside the solid electrolytes, and thus inhibiting its longitudinal growth and avoiding the solid electrolyte puncturing. As a proof of concept, a novel sandwich-structure solid electrolyte of Li6.7 La3 Zr2 Al0.1 O12 (LLZA)-PEO/Si-PEO electrolyte/ (LLZA)-PEO with asymmetrical structure is first constructed and demonstrated stable Li plating/stripping over 1800 h and remarkably improved cycling stability in Li/LiFePO4 cells with a reversible capacity of 111.9 mAh g-1 at 1 C after 150 cycles. The proof of lithiation of Si-PEO electrolyte in the interlayer is also verified. Furthermore, the pouch cell thus prepared exhibits comparable cyclic stability and is allowable for folding and cutting, suggesting its promising application in ASSLBs by this simple and efficient strategy.

| S-EPMC8811816 | biostudies-literature

Phenol-Catalyzed Discharge in the Aprotic Lithium-Oxygen Battery.

Project description:Discharge in the lithium-O2 battery is known to occur either by a solution mechanism, which enables high capacity and rates, or a surface mechanism, which passivates the electrode surface and limits performance. The development of strategies to promote solution-phase discharge in stable electrolyte solutions is a central challenge for development of the lithium-O2 battery. Here we show that the introduction of the protic additive phenol to ethers can promote a solution-phase discharge mechanism. Phenol acts as a phase-transfer catalyst, dissolving the product Li2 O2 , avoiding electrode passivation and forming large particles of Li2 O2 product-vital requirements for high performance. As a result, we demonstrate capacities of over 9 mAh cm-2areal , which is a 35-fold increase in capacity compared to without phenol. We show that the critical requirement is the strength of the conjugate base such that an equilibrium exists between protonation of the base and protonation of Li2 O2 .

| S-EPMC5488210 | biostudies-literature

Facile synthesis of a high electrical and ion conductivity junction-less 3D carbon sponge electrode for self-standing lithium ion battery anode.

Project description:Lithium ion batteries (LIB) are the most extensively researched and developed batteries. Currently, LIBs are used in various applications such as electric vehicles (EV), hybrid EVs (HEV), plug-in HEVs, and energy storage systems. However, their energy density is insufficient and further improvement is required. In this study, we propose the facile synthesis of a self-standing, junction-less 3D carbon sponge electrode (3DCS) for improving the energy density. A self-standing structure can improve the energy density by reducing non-active materials such as binders and current collectors, in electrodes. We use a kitchenware melamine sponge as the carbon precursor. The utilization of materials mass-produced by existing facilities is crucial for ensuring availability and low costs. Such characteristics are imperative for industrialization. These self-standing 3DCS electrodes, fabricated using available low-cost melamine sponges, demonstrate high charge-rate characteristics with a capacity retention of 81.8% at 4000 mA g-1 and cycle durability with 95.4% capacity retention after 500 cycles, without current collector, binder, and conductive additives. This high availability, low-cost material with excellent characteristics is beneficial for research institutions and companies that do not have facilities.

| S-EPMC9078278 | biostudies-literature

Oxygen-Rich Lithium Oxide Phases Formed at High Pressure for Potential Lithium-Air Battery Electrode.

Project description:The lithium-air battery has great potential of achieving specific energy density comparable to that of gasoline. Several lithium oxide phases involved in the charge-discharge process greatly affect the overall performance of lithium-air batteries. One of the key issues is linked to the environmental oxygen-rich conditions during battery cycling. Here, the theoretical prediction and experimental confirmation of new stable oxygen-rich lithium oxides under high pressure conditions are reported. Three new high pressure oxide phases that form at high temperature and pressure are identified: Li2O3, LiO2, and LiO4. The LiO2 and LiO4 consist of a lithium layer sandwiched by an oxygen ring structure inherited from high pressure ε-O8 phase, while Li2O3 inherits the local arrangements from ambient LiO2 and Li2O2 phases. These novel lithium oxides beyond the ambient Li2O, Li2O2, and LiO2 phases show great potential in improving battery design and performance in large battery applications under extreme conditions.

| S-EPMC5604394 | biostudies-literature

Simulation of electrochemical behavior in Lithium ion battery during discharge process.

Project description:An electrochemical Lithium ion battery model was built taking into account the electrochemical reactions. The polarization was divided into parts which were related to the solid phase and the electrolyte mass transport of species, and the electrochemical reactions. The influence factors on battery polarization were studied, including the active material particle radius and the electrolyte salt concentration. The results showed that diffusion polarization exist in the positive and negative electrodes, and diffusion polarization increase with the conducting of the discharge process. The physicochemical parameters of the Lithium ion battery had the huge effect on cell voltage via polarization. The simulation data show that the polarization voltage has close relationship with active material particle size, discharging rate and ambient temperature.

| S-EPMC5749719 | biostudies-literature

Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication.

Project description:The current lithium-ion battery (LIB) electrode fabrication process relies heavily on the wet coating process, which uses the environmentally harmful and toxic N-methyl-2-pyrrolidone (NMP) solvent. In addition to being unsustainable, the use of this expensive organic solvent substantially increases the cost of battery production, as it needs to be dried and recycled throughout the manufacturing process. Herein, we report an industrially viable and sustainable dry press-coating process that uses the combination of multiwalled carbon nanotubes (MWNTs) and polyvinylidene fluoride (PVDF) as a dry powder composite and etched Al foil as a current collector. Notably, the mechanical strength and performance of the fabricated LiNi0.7Co0.1Mn0.2O2 (NCM712) dry press-coated electrodes (DPCEs) far exceed those of conventional slurry-coated electrodes (SCEs) and give rise to high loading (100 mg cm-2, 17.6 mAh cm-2) with impressive specific energy and volumetric energy density of 360 Wh kg-1 and 701 Wh L-1, respectively.

| S-EPMC10006413 | biostudies-literature

Germanium microflower-on-nanostem as a high-performance lithium ion battery electrode.

Project description:We demonstrate a new design of Ge-based electrodes comprising three-dimensional (3-D) spherical microflowers containing crystalline nanorod networks on sturdy 1-D nanostems directly grown on a metallic current collector by facile thermal evaporation. The Ge nanorod networks were observed to self-replicate their tetrahedron structures and form a diamond cubic lattice-like inner network. After etching and subsequent carbon coating, the treated Ge nanostructures provide good electrical conductivity and are resistant to gradual deterioration, resulting in superior electrochemical performance as anode materials for LIBs, with a charge capacity retention of 96% after 100 cycles and a high specific capacity of 1360 mA h g(-1) at 1 C and a high-rate capability with reversible capacities of 1080 and 850 mA h g(-1) at the rates of 5 and 10 C, respectively. The improved electrochemical performance can be attributed to the fast electron transport and good strain accommodation of the carbon-filled Ge microflower-on-nanostem hybrid electrode.

| S-EPMC4217107 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data