Realization of a coupled-mode heat engine with cavity-mediated nanoresonators.
Ontology highlight
ABSTRACT:
SUBMITTER: Sheng J
PROVIDER: S-EPMC8654295 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The understanding of heat transport in nonequilibrium thermodynamics is an important research frontier, which is crucial for implementing novel thermodynamic devices, such as heat engines and refrigerators. The convection, conduction, and radiation are the well-known basic ways to transfer thermal energy. Here, we demonstrate a different mechanism of phonon heat transport between two spatially separated nanomechanical resonators coupled by the cavity-enhanced long-range interactions. The single trajectory for thermalization and non-equilibrium dynamics is monitored in real-time. In the strong coupling regime, the instant heat flux spontaneously oscillates back and forth in the nonequilibrium steady states. The universal bound on the precision of nonequilibrium steady-state heat flux, i.e. the thermodynamic uncertainty relation, is verified in such a temperature gradient driven far-off equilibrium system. Our results give more insight into the heat transfer with nanomechanical oscillators, and provide a playground for testing fundamental theories in non-equilibrium thermodynamics.
| S-EPMC7494915 | biostudies-literature
Project description:The most succinct manifestation of the second law of thermodynamics is the limitation imposed by the Landauer principle on the amount of heat a Maxwell demon (MD) can convert into free energy per single bit of information obtained in a measurement. We propose and realize an electronic MD based on a single-electron box operated as a Szilard engine, where kBT ln 2 of heat is extracted from the reservoir at temperature T per one bit of created information. The information is encoded in the position of an extra electron in the box.
| S-EPMC4183300 | biostudies-literature
Project description:The design and experimental demonstration of an open cavity in the microwave region is presented. The resonance condition is achieved through the cancellation of lightpaths in positive and negative refractive index materials. The positive index material is a structured aluminium surface supporting a spoof surface plasmon mode, and the negative index material is a photonic crystal made of alumina. A resonance peak is observed in the measured spectrum at which the electric field distribution agrees with numerical simulation.
| S-EPMC4122964 | biostudies-other
Project description:Heat engines are based on the physical realization of a thermodynamic cycle, most famously the liquid-vapour Rankine cycle used for steam engines. Here we present a sublimation heat engine, which can convert temperature differences into mechanical work via the Leidenfrost effect. Through controlled experiments, quantified by a hydrodynamic model, we show that levitating dry-ice blocks rotate on hot turbine-like surfaces at a rate controlled by the turbine geometry, temperature difference and solid material properties. The rotational motion of the dry-ice loads is converted into electric power by coupling to a magnetic coil system. We extend our concept to liquid loads, generalizing the realization of the new engine to both sublimation and the instantaneous vapourization of liquids. Our results support the feasibility of low-friction in situ energy harvesting from both liquids and ices. Our concept is potentially relevant in challenging situations such as deep drilling, outer space exploration or micro-mechanical manipulation.
| S-EPMC4366496 | biostudies-literature
Project description:Quantum physics revolutionized classical disciplines of mechanics, statistical physics, and electrodynamics. One branch of scientific knowledge however seems untouched: thermodynamics. Major motivation behind thermodynamics is to develop efficient heat engines. Technology has a trend to miniaturize engines, reaching to quantum regimes. Development of quantum heat engines (QHEs) requires emerging field of quantum thermodynamics. Studies of QHEs debate whether quantum coherence can be used as a resource. We explore an alternative where it can function as an effective catalyst. We propose a QHE which consists of a photon gas inside an optical cavity as the working fluid and quantum coherent atomic clusters as the fuel. Utilizing the superradiance, where a cluster can radiate quadratically faster than a single atom, we show that the work output becomes proportional to the square of the number of the atoms. In addition to practical value of cranking up QHE, our result is a fundamental difference of a quantum fuel from its classical counterpart.
| S-EPMC4531314 | biostudies-other
Project description:Plasmonic self-assembled nanocavities are ideal platforms for extreme light localization as they deliver mode volumes of <50 nm3. Here we show that high-order plasmonic modes within additional micrometer-scale resonators surrounding each nanocavity can boost light localization to intensity enhancements >105. Plasmon interference in these hybrid microresonator nanocavities produces surface-enhanced Raman scattering (SERS) signals many-fold larger than in the bare plasmonic constructs. These now allow remote access to molecules inside the ultrathin gaps, avoiding direct irradiation and thus preventing molecular damage. Combining subnanometer gaps with micrometer-scale resonators places a high computational demand on simulations, so a generalized boundary element method (BEM) solver is developed which requires 100-fold less computational resources to characterize these systems. Our results on extreme near-field enhancement open new potential for single-molecule photonic circuits, mid-infrared detectors, and remote spectroscopy.
| S-EPMC7995252 | biostudies-literature
Project description:This paper reports a two-orders-of-magnitude improvement in the sensitivity of antenna-coupled nanothermocouple (ACNTC) infrared detectors. The electrical signal generated by on-chip ACNTCs results from the temperature difference between a resonant antenna locally heated by infrared radiation and the substrate. A cavity etched under the antenna provides two benefits. It eliminates the undesirable cooling of the hot junction by thermally isolating the antenna from the substrate. More importantly, careful cavity design results in constructive interference of the incident radiation reflected back to the antenna, which significantly increases the detector sensitivity. We present the cavity-depth-dependent response of ACNTCs with cavity depths between 1 μm and 22 μm. When constructive interference is maximized, the thermal response increases by 100-fold compared to devices without the cavity.
| S-EPMC6610083 | biostudies-literature
Project description:Two seemingly unrelated effects attributed to quantum coherence have been reported recently in natural and artificial light-harvesting systems. First, an enhanced solar cell efficiency was predicted and second, population oscillations were measured in photosynthetic antennae excited by sequences of coherent ultrashort laser pulses. Because both systems operate as quantum heat engines (QHEs) that convert the solar photon energy to useful work (electric currents or chemical energy, respectively), the question arises whether coherence could also enhance the photosynthetic yield. Here, we show that both effects arise from the same population-coherence coupling term which is induced by noise, does not require coherent light, and will therefore work for incoherent excitation under natural conditions of solar excitation. Charge separation in light-harvesting complexes occurs in a pair of tightly coupled chlorophylls (the special pair) at the heart of photosynthetic reaction centers of both plants and bacteria. We show the analogy between the energy level schemes of the special pair and of the laser/photocell QHEs, and that both population oscillations and enhanced yield have a common origin and are expected to coexist for typical parameters. We predict an enhanced yield of 27% in a QHE motivated by the reaction center. This suggests nature-mimicking architectures for artificial solar energy devices.
| S-EPMC3581952 | biostudies-literature
Project description:Surface plasmon polaritons (SPPs) manipulation is of vital importance to construct ultracompact integrated micro/nano-optical devices and systems. Here we report the design, fabrication, and characterization of a SPP microcavity with full transverse and longitudinal mode selection and control on the surface of gold film. The designed microcavity supports the fundamental and first-order transverse modes of Gaussian mode beam with controllable longitudinal modes, respectively. The transverse mode is determined by two holographic mirrors made from deliberately designed groove patterns via the surface electromagnetic wave holography methodology, while the longitudinal mode is determined by the length of cavity. Both numerical simulations and leaky-wave SPP mode observations confirm the realization of full mode selection in the fabricated cavity. Our work opens up a powerful way to fully explore longitudinal and transverse mode control in SPP microcavities, which will be beneficial for light-matter interaction enhancement, construction of novel SPP nanolaser and microlaser, optical sensing, and optical information processing.
| S-EPMC4897782 | biostudies-literature
Project description:Multistability is a crucial recurring theme in cell signaling. Multistability is attributed to the presence of positive feedback loops, but the general condition and essential mechanism for realizing multistability remain unclear. Here, we build a generic circuit model comprising two transcription factors and a microRNA, representing a kind of core architecture in gene regulatory networks. The circuit can be decomposed into two positive feedback loops (PFLs) or one PFL and one negative feedback loop (NFL), which are multiplicatively coupled. Bifurcation analyses of the model reveal that the circuit can achieve tristability through four kinds of bifurcation scenarios when parameter values are varied in a wide range. We formulate the general requirement for tristability in terms of logarithmic gain of the circuit. The parameter ranges for tristability and possible transition routes among steady states are determined by the combination of gain features of individual feedback loops. Coupling two PFLs with bistability or one NFL with a bistable PFL is most likely to generate tristability, but the underlying mechanisms are largely different. We also interpret published results and make testable predictions. This work sheds new light on interlinking feedback loops to realize tristability. The proposed theoretical framework can be of wide applicability.
| S-EPMC4932522 | biostudies-literature