Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparing data driven and physics inspired models for hopping transport in organic field effect transistors.

ABSTRACT: The past few decades have seen an uptick in the scope and range of device applications of organic semiconductors, such as organic field-effect transistors, organic photovoltaics and light-emitting diodes. Several researchers have studied electrical transport in these materials and proposed physical models to describe charge transport with different material parameters, with most disordered semiconductors exhibiting hopping transport. However, there exists a lack of a consensus among the different models to describe hopping transport accurately and uniformly. In this work, we first evaluate the efficacy of using a purely data-driven approach, i.e., symbolic regression, in unravelling the relationship between the measured field-effect mobility and the controllable inputs of temperature and gate voltage. While the regressor is able to capture the scaled mobility well with mean absolute error (MAE) ~ O(10^-2), better than the traditionally used hopping transport model, it is unable to derive physically interpretable input-output relationships. We then examine a physics-inspired renormalization approach to describe the scaled mobility with respect to a scale-invariant reference temperature. We observe that the renormalization approach offers more generality and interpretability with a MAE of the ~ O(10^-1), still better than the traditionally used hopping model, but less accurate as compared to the symbolic regression approach. Our work shows that physics-based approaches are powerful compared to purely data-driven modelling, providing an intuitive understanding of data with extrapolative ability.

SUBMITTER: Lakshminarayanan M

PROVIDER: S-EPMC8654921 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Switching from Electron to Hole Transport in Solution-Processed Organic Blend Field-Effect Transistors.

Project description:Organic electronics became an attractive alternative for practical applications in complementary logic circuits due to the unique features of organic semiconductors such as solution processability and ease of large-area manufacturing. Bulk heterojunctions (BHJ), consisting of a blend of two organic semiconductors of different electronic affinities, allow fabrication of a broad range of devices such as light-emitting transistors, light-emitting diodes, photovoltaics, photodetectors, ambipolar transistors and sensors. In this work, the charge carrier transport of BHJ films in field-effect transistors is switched from electron to hole domination upon processing and post-treatment. Low molecular weight n-type N,N'-bis(n-octyl)-(1,7&1,6)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDI8-CN2) was blended with p-type poly[2,5-bis(3-tetradecylthiophene-2-yl)thieno[3,2-b]thiophene] (PBTTT-C14) and deposited by spin-coating to form BHJ films. Systematic investigation of the role of rotation speed, solution temperature, and thermal annealing on thin film morphology was performed using atomic force microscopy, scanning electron microscopy, and grazing incidence wide-angle X-ray scattering. It has been determined that upon thermal annealing the BHJ morphology is modified from small interconnected PDI8-CN2 crystals uniformly distributed in the polymer fraction to large planar PDI8-CN2 crystal domains on top of the blend film, leading to the switch from electron to hole transport in field-effect transistors.

| S-EPMC7709025 | biostudies-literature

Diffusion driven selectivity in organic electrochemical transistors.

Project description:Organic Electrochemical transistors (OECTs) present unique features for their strategic combination with biomedical interfaces, simple and low voltage operation regime and sensing ability in aqueous environment, but they still lack selectivity, so that a significant effort in research is devoted to overcome this limitation. Here, we focus on the diffusion properties of molecular species in the electrolyte, which opportunely analyzed, modeled and compared to experimental data, serve as a simple and direct key factor in the recognition of species during OECT sensing. Specifically, we model the transient behavior of an OECT considering the effect of diffusion of the target species in the electrolyte. In doing so, we develop a general method that can be used to differentiate and distinguish different molecules from a complex mixture, on the basis of their diffusivity and thus mass. More importantly, the model can be realistically used to determine the physical characteristics of the transported species in a solution from a simple fitting procedure. On the basis of the obtained results, we discuss the contribution that our study could bring to OECT architecture to realize a new generation of devices with improved sensitivity, selectivity and reliability.

| S-EPMC3944224 | biostudies-literature

Exploitation of Thermoresponsive Switching Organic Field-Effect Transistors.

Project description:In this work, a novel thermoresponsive switching transistor is developed through the rational design of active materials based on the typical field-effect transistor (FET) device configuration, where the active material is composed of a blend of a thermal expansion polymer and a polymeric semiconductor. Herein, polyethylene (PE) is employed as the thermal expansion polymer because of its high volume expansion coefficient near its melting point (90-130 °C), which similarly corresponds to the overheating point that would cause damage or cause fire in the devices. It is revealed that owing to the thermistor property of PE, the FET characteristics of the derived device will be largely decreased at high temperatures (100-120 °C). It is because the high volume expansion of PE at such high temperature (near its T m) effectively increases the distance of the crystalline domains of poly(3-hexylthiophene-2,5-diyl) to result in a great inhibition of current. Besides, the performance of this device will recover back to its original value after cooling from 120 to 30 °C owing to the volume contraction of PE. The reversible FET characteristics with temperature manifest the good thermal sensitivity of the PE-based device. Our results demonstrate a facile and promising approach for the development of next-generation overheating shutdown switches for electrical circuits.

| S-EPMC6933784 | biostudies-literature

Touching polymer chains by organic field-effect transistors.

Project description:Organic field-effect transistors (OFETs) are used to directly "touch" the movement and dynamics of polymer chains, and then determine Tg. As a molecular-level probe, the conducting channel of OFETs exhibits several unique advantages: 1) it directly detects the motion and dynamics of polymer chain at Tg; 2) it allows the measurement of size effects in ultrathin polymer films (even down to 6 nm), which bridges the gap in understanding effects between surface and interface. This facile and reliable determination of Tg of polymer films and the understanding of polymer chain dynamics guide a new prospect for OFETs besides their applications in organic electronics and casting new light on the fundamental understanding of the nature of polymer chain dynamics.

| S-EPMC4165941 | biostudies-literature

Vertical Microcavity Organic Light-emitting Field-effect Transistors.

Project description:Organic light-emitting field-effect transistors (OLEFETs) are regarded as a novel kind of device architecture for fulfilling electrical-pumped organic lasers. However, the realization of OLEFETs with high external quantum efficiency (EQE) and high brightness simultaneously is still a tough task. Moreover, the design of the resonator structure in LED is far from satisfactory. Here, OLEFETs with EQE of 1.5% at the brightness of 2600 cdm(-2), and the corresponding ON/OFF ratio and current efficiency reaches above 10(4) and 3.1 cdA(-1), respectively, were achieved by introducing 1,4,5,8,9,12-hexaazatriphenylene-hexacarbonitrile (HAT-CN) as a charge generation layer. Moreover, a vertical microcavity based on distributed Bragg reflector (DBR) and Ag source/drain electrodes is successfully introduced into the high performance OLEFETs, which results in electroluminescent spectrum linewidth narrowing from 96 nm to 6.9 nm. The results manifest the superiority of the vertical microcavity as an optical resonator in OLEFETs, which sheds some light on achieving the electrically pumped organic lasers.

| S-EPMC4794712 | biostudies-literature

High-Frequency Operation of Vertical Organic Field-Effect Transistors.

Project description:The high-frequency and low-voltage operation of organic thin-film transistors (OTFTs) is a key requirement for the commercial success of flexible electronics. Significant progress has been achieved in this regard by several research groups highlighting the potential of OTFTs to operate at several tens or even above 100 MHz. However, technology maturity, including scalability, integrability, and device reliability, is another crucial point for the semiconductor industry to bring OTFT-based flexible electronics into mass production. These requirements are often not met by high-frequency OTFTs reported in the literature as unconventional processes, such as shadow-mask patterning or alignment with unrealistic tolerances for production, are used. Here, ultra-short channel vertical organic field-effect transistors (VOFETs) with a unity current gain cut-off frequency (fT ) up to 43.2 MHz (or 4.4 MHz V-1 ) operating below 10 V are shown. Using state-of-the-art manufacturing techniques such as photolithography with reliable fabrication procedures, the integration of such devices down to the size of only 12 × 6 µm2 is shown, which is important for the adaption of this technology in high-density circuits (e.g., display driving). The intrinsic channel transconductance is analyzed and demonstrates that the frequencies up to 430 MHz can be reached if the parasitic electrode overlap is minimized.

| S-EPMC9403633 | biostudies-literature

Quinacridone-Diketopyrrolopyrrole-Based Polymers for Organic Field-Effect Transistors.

Project description:Incorporation of pigment or dye molecules as building units is of great interest in the development of semiconducting polymers, due to their strong intermolecular interactions arising from the strong local dipoles in the unit structure, which would facilitate the charge transport property. In this paper, semiconducting polymers based on well-known pigments, namely, quinacridone and diketopyrrolopyrrole, are synthesized and characterized. The π-stacking distances are found to be 3.5-3.8 Å, which is fairly narrow for semiconducting polymers, indicating that they possess strong intermolecular interactions. Interestingly, polymer orientation is influenced by the composition of alkyl side chains. While the edge-on orientation is observed when the linear alkyl groups are introduced for all the side chains, the face-on orientation is observed when the branched alkyl groups are introduced either in the quinacridone or diketopyrrolopyrrole unit. It is found that the electronic structure of the present polymers is mostly affected by that of the diketopyrrolopyrrole unit, as evidenced by the absorption spectra and computation. Although the field-effect mobility of the polymers is modest, i.e., in the order of 10-4-10-3 cm²/Vs, these findings could be important information for the development of semiconducting polymers.

| S-EPMC5512964 | biostudies-other

Dinaphthotetrathienoacenes: Synthesis, Characterization, and Applications in Organic Field-Effect Transistors.

Project description:The charge transport of crystalline organic semiconductors is limited by dynamic disorder that tends to localize charges. It is the main hurdle to overcome in order to significantly increase charge carrier mobility. An innovative design that combines a chemical structure based on sulfur-rich thienoacene with a solid-state herringbone (HB) packing is proposed and the synthesis, physicochemical characterization, and charge transport properties of two new thienoacenes bearing a central tetrathienyl core fused with two external naphthyl rings: naphtho[2,3-b]thieno-[2''',3''':4'',5'']thieno[2″,3″:4',5']thieno[3',2'-b]naphtho[2,3-b]thiophene (DN4T) and naphtho[1,2-b]thieno-[2''',3''':4'',5'']thieno[2'',3'':4',5']thieno[3',2'-b]naphtho[1,2-b]thiophene are presented. Both compounds crystallize with a HB pattern structure and present transfer integrals ranging from 33 to 99 meV (for the former) within the HB plane of charge transport. Molecular dynamics simulations point toward an efficient resilience of the transfer integrals to the intermolecular sliding motion commonly responsible for strong variations of the electronic coupling in the crystal. Best device performances are reached with DN4T with hole mobility up to μ = 2.1 cm2 V-1 s-1 in polycrystalline organic field effect transistors, showing the effectiveness of the electronic coupling enabled by the new aromatic core. These promising results pave the way to the design of high-performing materials based on this new thienoacene, notably through the introduction of alkyl side-chains.

| S-EPMC9259716 | biostudies-literature

Highly Oriented Liquid Crystal Semiconductor for Organic Field-Effect Transistors.

Project description:We report a mesogenic compound which introduces nematic liquid crystal (LC) ordering into the benzothienobenzothiophene (BTBT) family of LCs, creating a new class of LC semiconducting materials which respond in a facile way to anisotropic surfaces, and can, thereby, be effectively processed into highly oriented monodomains. Measurement on these domains of the electrical conductivity, with in situ monitoring of domain quality and orientation using LC birefringence textures in electroded cells, brings a new era of precision and reliability to the determination of anisotropic carrier mobility in LC semiconductors.

| S-EPMC6276037 | biostudies-literature

One dimensional transport in silicon nanowire junction-less field effect transistors.

Project description:Junction-less nanowire transistors are being investigated to solve short channel effects in future CMOS technology. Here we demonstrate 8?nm diameter silicon nanowire junction-less transistors with metallic doping densities which demonstrate clear 1D electronic transport characteristics. The 1D regime allows excellent gate modulation with near ideal subthreshold slopes, on- to off-current ratios above 108 and high on-currents at room temperature. Universal conductance scaling as a function of voltage and temperature similar to previous reports of Luttinger liquids and Coulomb gap behaviour at low temperatures suggests that many body effects including electron-electron interactions are important in describing the electronic transport. This suggests that modelling of such nanowire devices will require 1D models which include many body interactions to accurately simulate the electronic transport to optimise the technology but also suggest that 1D effects could be used to enhance future transistor performance.

| S-EPMC5462787 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data