Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Single-Atom Ru Implanted on Co₃ O₄ Nanosheets as Efficient Dual-Catalyst for Li-CO₂ Batteries.

ABSTRACT: Li-CO₂ battery has attracted extensive attention and research due to its super high theoretical energy density and its ability to fix greenhouse gas CO₂ . However, the slow reaction kinetics during discharge/charge seriously limits its development. Hence, a simple cation exchange strategy is developed to introduce Ru atoms onto a Co₃ O₄ nanosheet array grown on carbon cloth (SA Ru-Co₃ O₄ /CC) to prepare a single atom site catalyst (SASC) and successfully used in Li-CO₂ battery. Li-CO₂ batteries based on SA Ru-Co₃ O₄ /CC cathode exhibit enhanced electrochemical performances including low overpotential, ultra high capacity, and long cycle life. Density functional theory calculations reveal that single atom Ru as the driving force center can significantly enhance the intrinsic affinity for key intermediates, thus enhancing the reaction kinetics of CO₂ reduction reaction in Li-CO₂ batteries, and ultimately optimizing the growth pathway of discharge products. In addition, the Bader charge analysis indicates that Ru atoms as electron-deficient centers can enhance the catalytic activity of SA Ru-Co₃ O₄ /CC cathode for the CO₂ evolution reaction. It is believed that this work has important implications for the development of new SASCs and the design of efficient catalyst for Li-CO₂ batteries.

SUBMITTER: Lian Z

PROVIDER: S-EPMC8655220 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Monodispersed Ru Nanoparticles Functionalized Graphene Nanosheets as Efficient Cathode Catalysts for O2-Assisted Li-CO2 Battery.

Project description:In Li-CO2 battery, due to the highly insulating nature of the discharge product of Li2CO3, the battery needs to be charged at a high charge overpotential, leading to severe cathode and electrolyte instability and hence poor battery cycle performance. Developing efficient cathode catalysts to effectively reduce the charge overpotential represents one of key challenges to realize practical Li-CO2 batteries. Here, we report the use of monodispersed Ru nanoparticles functionalized graphene nanosheets as cathode catalysts in Li-CO2 battery to significantly lower the charge overpotential for the electrochemical decomposition of Li2CO3. In our battery, a low charge voltage of 4.02 V, a high Coulomb efficiency of 89.2%, and a good cycle stability (67 cycles at a 500 mA h/g limited capacity) are achieved. It is also found that O2 plays an essential role in the discharge process of the rechargeable Li-CO2 battery. Under the pure CO2 environment, Li-CO2 battery exhibits negligible discharge capacity; however, after introducing 2% O2 (volume ratio) into CO2, the O2-assisted Li-CO2 battery can deliver a high capacity of 4742 mA h/g. Through an in situ quantitative differential electrochemical mass spectrometry investigation, the final discharge product Li2CO3 is proposed to form via the reaction 4Li+ + 2CO2 + O2 + 4e- → 2Li2CO3. Our results validate the essential role of O2 and can help deepen the understanding of the discharge and charge reaction mechanisms of the Li-CO2 battery.

| S-EPMC6645591 | biostudies-literature

Synthesis of piperidines and pyridine from furfural over a surface single-atom alloy Ru1CoNP catalyst.

Project description:The sustainable production of value-added N-heterocycles from available biomass allows to reduce the reliance on fossil resources and creates possibilities for economically and ecologically improved synthesis of fine and bulk chemicals. Herein, we present a unique Ru1CoNP/HAP surface single-atom alloy (SSAA) catalyst, which enables a new type of transformation from the bio-based platform chemical furfural to give N-heterocyclic piperidine. In the presence of NH3 and H2, the desired product is formed under mild conditions with a yield up to 93%. Kinetic studies show that the formation of piperidine proceeds via a series of reaction steps. Initially, in this cascade process, furfural amination to furfurylamine takes place, followed by hydrogenation to tetrahydrofurfurylamine (THFAM) and then ring rearrangement to piperidine. DFT calculations suggest that the Ru1CoNP SSAA structure facilitates the direct ring opening of THFAM resulting in 5-amino-1-pentanol which is quickly converted to piperidine. The value of the presented catalytic strategy is highlighted by the synthesis of an actual drug, alkylated piperidines, and pyridine.

| S-EPMC10564752 | biostudies-literature

A porous Co-Ru@C shell as a bifunctional catalyst for lithium-oxygen batteries.

Project description:We use SiO2 as a template and dopamine as a carbon source to synthesize a hollow C shell, and we load Co and Ru nanoparticles onto it to obtain a Co-Ru@C shell composite. The diameter and thickness of the C shell are 100 nm and 5-10 nm, respectively, and numerous holes of different sizes exist on the C shell. Meanwhile, numerous C shells stack together to form macropores, thereby forming a hierarchical porous structure in the material. Brunauer-Emmett-Teller surface area analysis reveals that the specific surface area and pore volume of the Co-Ru@C shell are 631.57 m2 g-1 and 2.20 cc g-1, respectively, which can result in many three-phase interfaces and provide more space for the deposition of discharge products. Compared with Co@C shell and C shell electrodes, the obtained Co-Ru@C shell-based electrodes exhibit the highest discharge capacity, the lowest oxygen reduction reaction/oxygen evolution reaction overpotential and the best cycle stability, indicating the excellent catalytic ability of the Co-Ru@C shell.

| S-EPMC9081741 | biostudies-literature

Reversible and irreversible reaction mechanisms of Li-CO2 batteries.

Project description:Li-CO2 batteries are considered a versatile solution for CO2 utilization. However, their development, including reversibility and efficiency, is impeded by an inadequate understanding of Li-CO2 electrochemistry, particularly the decomposition of carbon and the generation of by-product O2. Here, using typical Ru(0001) (reversible) and Ir(111) (irreversible) as model catalysts and employing state-of-the-art first-principles calculations, the rechargeable/reversible reaction mechanisms of Li-CO2 batteries are disclosed. We find that electrolyte, often neglected or oversimplified in Li-CO2 modelling, plays an essential role in CO2 activation and C-C coupling affects the generation pathways of discharge intermediates due to the sluggish kinetics. The results rationalize experimental observations, which are also examined by constant-potential modelling. Specifically, by exploring the kinetics of the charging process, we discover that the reversibility of Ru(0001) is attributed to its ability to suppress O-O coupling while co-oxidizing Li2CO3 and carbon. In contrast, Li2CO3 decomposition on Ir(111) preferentially produces O2, during which carbon can only be partially decomposed. These findings solve long-standing questions and highlight the necessity of describing the explicit solvent effect in modelling, which can promote further studies on Li-CO2 batteries.

| S-EPMC10966960 | biostudies-literature

High-Performance Li-O2 Batteries with Controlled Li2O2 Growth in Graphene/Au-Nanoparticles/Au-Nanosheets Sandwich.

Project description:The working of nonaqueous Li-O2 batteries relies on the reversible formation/decomposition of Li2O2 which is electrically insulating and reactive with carbon and electrolyte. Realizing controlled growth of Li2O2 is a prerequisite for high performance of Li-O2 batteries. In this work, a sandwich-structured catalytic cathode is designed: graphene/Au-nanoparticles/Au-nanosheets (G/Au-NP/Au-NS) that enables controlled growth of Li2O2 spatially and structurally. It is found that thin-layer Li2O2 (below 10 nm) can grow conformally on the surface of Au NPs confined in between graphene and Au NSs. This unique crystalline behavior of Li2O2 effectively relieves or defers the electrode deactivation with Li2O2 accumulation and largely reduces the contact of Li2O2 with graphene and electrolyte. As a result, Li-O2 batteries with the G/Au-NP/Au-NS cathode exhibit superior electrochemical performance. A stable cycling of battery can last 300 times at 400 mA g-1 when the capacity is limited at 500 mAh g-1. This work provides a practical design of catalytic cathodes capable of controlling Li2O2 growth.

| S-EPMC5095780 | biostudies-literature

Bromide promoted hydrogenation of CO2 to higher alcohols using Ru-Co homogeneous catalyst.

Project description:Iodides are commonly used promoters in C2+OH synthesis from CO2/CO hydrogenation. Here we report the highly efficient synthesis of C2+OH from CO2 hydrogenation over a Ru3(CO)12-Co4(CO)12 bimetallic catalyst with bis(triphenylphosphoranylidene)ammonium chloride (PPNCl) as the cocatalyst and LiBr as the promoter. Methanol, ethanol, propanol and isobutanol were formed at milder conditions. The catalytic system had a much better overall performance than those of reported iodide promoted systems because PPNCl and LiBr cooperated very well in accelerating the reaction. LiBr enhanced the activity and PPNCl improved the selectivity, and thus both the activity and selectivity were very high when both of them were used simultaneously. In addition, the catalyst could be reused for at least five cycles without an obvious change of catalytic performance.

| S-EPMC6020613 | biostudies-literature

Ultrafine Co-Species Interspersed g-C3N4 Nanosheets and Graphene as an Efficient Polysulfide Barrier to Enable High Performance Li-S Batteries.

Project description:Lithium-sulfur (Li-S) batteries are regarded as one of the promising advanced energy storage systems due to their ultrahigh capacity and energy density. However, their practical applications are still hindered by the serious shuttle effect and sluggish reaction kinetics of soluble lithium polysulfides. Herein, g-C3N4 nanosheets and graphene decorated with an ultrafine Co-species nanodot heterostructure (Co@g-C3N4/G) as separator coatings were designed following a facile approach. Such an interlayer can not only enable effective polysulfide affinity through the physical barrier and chemical binding but also simultaneously have a catalytic effect on polysulfide conversion. Because of these superior merits, the Li-S cells assembled with Co@g-C3N4/G-PP separators matched with the S/KB composites (up to ~70 wt% sulfur in the final cathode) exhibit excellent rate capability and good cyclic stability. A high specific capacity of ~860 mAh g-1 at 2.0 C as well as a capacity-fading rate of only ~0.035% per cycle over 350 cycles at 0.5 C can be achieved. This bifunctional separator can even endow a Li-S cell at a low current density to exhibit excellent cycling capability, with a capacity retention rate of ~88.4% at 0.2 C over 250 cycles. Furthermore, a Li-S cell with a Co@g-C3N4/G-PP separator possesses a stable specific capacity of 785 mAh g-1 at 0.2 C after 150 cycles and a superior capacity retention rate of ~84.6% with a high sulfur loading of ~3.0 mg cm-2. This effective polysulfide-confined separator holds good promise for promoting the further development of high-energy-density Li-S batteries.

| S-EPMC9863667 | biostudies-literature

Highly selective and robust single-atom catalyst Ru1/NC for reductive amination of aldehydes/ketones.

Project description:Single-atom catalysts (SACs) have emerged as a frontier in heterogeneous catalysis due to the well-defined active site structure and the maximized metal atom utilization. Nevertheless, the robustness of SACs remains a critical concern for practical applications. Herein, we report a highly active, selective and robust Ru SAC which was synthesized by pyrolysis of ruthenium acetylacetonate and N/C precursors at 900 °C in N2 followed by treatment at 800 °C in NH3. The resultant Ru1-N3 structure exhibits moderate capability for hydrogen activation even in excess NH3, which enables the effective modulation between transimination and hydrogenation activity in the reductive amination of aldehydes/ketones towards primary amines. As a consequence, it shows superior amine productivity, unrivalled resistance against CO and sulfur, and unexpectedly high stability under harsh hydrotreating conditions compared to most SACs and nanocatalysts. This SAC strategy will open an avenue towards the rational design of highly selective and robust catalysts for other demanding transformations.

| S-EPMC8172939 | biostudies-literature

Li1.2Mn0.54Ni0.13Co0.13O2 nanosheets with porous structure as a high-performance cathode material for lithium-ion batteries.

Project description:The morphological and structural optimizations of electrode materials are efficient ways to enhance their electrochemical performance. Herein, we report a facile co-precipitation and subsequent calcination method to fabricate Li1.2Mn0.54Ni0.13Co0.13O2 nanosheets consisting of interconnected primary nanoparticles and open holes through the full thickness. By comparing the nanosheets and the agglomerated nanoparticles, the effects of the morphology and structure on the electrochemical performance are investigated. Specifically, the nanosheets exhibit a discharge capacity of 210 mA h g-1 at 0.5C with a capacity retention of 85% after 100 cycles. The improved electrochemical performance could be attributed to their morphological and structural improvements, which may facilitate sufficient electrolyte contacts, short diffusion paths and good structural integrity during the charge/discharge process. This work provides a feasible approach to fabricate lithium-rich layered oxide cathode materials with 2D morphology and porous structure, and reveals the relationships between their morphology, structure and electrochemical performance.

| S-EPMC9043626 | biostudies-literature

Structural Evolution of Electrochemically Lithiated MoS2 Nanosheets and the Role of Carbon Additive in Li-Ion Batteries.

Project description:Understanding the structure and phase changes associated with conversion-type materials is key to optimizing their electrochemical performance in Li-ion batteries. For example, molybdenum disulfide (MoS2) offers a capacity up to 3-fold higher (?1 Ah/g) than the currently used graphite anodes, but they suffer from limited Coulombic efficiency and capacity fading. The lack of insights into the structural dynamics induced by electrochemical conversion of MoS2 still hampers its implementation in high energy-density batteries. Here, by combining ab initio density-functional theory (DFT) simulation with electrochemical analysis, we found new sulfur-enriched intermediates that progressively insulate MoS2 electrodes and cause instability from the first discharge cycle. Because of this, the choice of conductive additives is critical for the battery performance. We investigate the mechanistic role of carbon additive by comparing equal loading of standard Super P carbon powder and carbon nanotubes (CNTs). The latter offer a nearly 2-fold increase in capacity and a 45% reduction in resistance along with Coulombic efficiency of over 90%. These insights into the phase changes during MoS2 conversion reactions and stabilization methods provide new solutions for implementing cost-effective metal sulfide electrodes, including Li-S systems in high energy-density batteries.

| S-EPMC5089058 | biostudies-literature