Genes and Pathways Associated with Skeletal Sagittal Malocclusions: A Systematic Review.
Ontology highlight
ABSTRACT:
SUBMITTER: Gershater E
PROVIDER: S-EPMC8657482 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:ObjectiveThe aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions.MethodsTransverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis.ResultsIn male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups.ConclusionsPremolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.
| S-EPMC7093660 | biostudies-literature
Project description:Recently, new strategies for treating class III malocclusions have appeared. Skeletal anchorage appears to reduce the dentoalveolar effects while maximising the orthopaedic effect in growing patients. The purpose of this systematic review and meta-analysis is to examine the effectiveness of bone anchorage devices for interceptive treatment of skeletal class III malocclusions. Searches were made in the Pubmed, Embase, Scopus and Cochrane databases, as well as in a grey literature database, and were complemented by hand-searching. The criteria for eligibility were: patients who had undergone orthodontic treatment with skeletal anchorage (miniplates and miniscrews). Patients with syndromes or craniofacial deformities or who had undergone maxillofacial surgery were excluded. The following variables were recorded for each article: author, year of publication, type of study, sample size, dropouts, demographic variables, treatment carried out, radiographic study (2D or 3D), follow-up time, and quality of the articles on the Newcastle-Ottawa Scale. The means and confidence intervals of the following variables were employed: Wits, overjet, ANB, SNA and SNB. Initially, 239 articles were identified. After removing the duplicates and applying the selection criteria, 9 were included in the qualitative synthesis and 7 in the quantitative synthesis (meta-analysis). It may be concluded that skeletal anchorage is an effective treatment for improving skeletal Class III malocclusion, but when compared with other traditional treatments such as disjunction and face mask, there is no clear evidence that skeletal anchorage improves the results.
| S-EPMC5362089 | biostudies-literature
Project description:IntroductionNonmetric dental traits and the shape, size, or number of dental anomalies are essential to various dental fields such as orthodontics, dental anatomy, anthropology, pathology, and forensic dentistry. Nonetheless, many are not well assessed worldwide. Moreover, most studies are limited to a few nonmetric traits. Therefore, we aimed to examine several nonmetric dental traits/anomalies.MethodsIn this cross-sectional epidemiological study, ~ 9000 permanent teeth of 331 non-syndromic orthodontic patients (radiographs and dental casts) with fully erupted permanent dentitions (except the third molars and some cases of a few teeth missing or excluded) were evaluated by two observers, each twice, in search for 62 nonmetric traits/shape-number-size anomalies. The traits/anomalies of interest were supernumerary, microdontia, peg-shaped lateral, shovelings, talon cusps, Carabelli cusps, fifth/sixth/seventh cusps on the molars, hypocone/hypoconulid absence, protostylid, deflecting wrinkles, canine mesial ridge, distal trigonid crest, canine distal accessory ridge, accessory cusps in the mesial/distal marginal ridges, mesial/distal accessory ridges, and accessory cusps in the lingual of the mandibular premolars and second molars). Data, at both patient/quarter levels, were analyzed regarding the associated factors (skeletal Angle classes, crowding, sex, and sides) as well as the correlations among traits, using the chi-square test and Spearman correlation coefficient (α = 0.05).ResultsPrevalence rates of 44 traits/anomalies were reported (18 out of the 62 searched traits/anomalies were not found [prevalence = 0%]). Microdontia and accessory cusps on the marginal ridge of the second mandibular molars were significantly more common in women (P < 0.05). Canine talon cusp and distal trigonid crest of the second mandibular molars were more prevalent in men (P < 0.05). Shoveling, canine talon cusp, canine distal accessory ridge, and accessory cusp in the first premolar might be more prevalent in skeletal Angle class II; whereas, accessory cusp in the mesial marginal ridge of the second premolar might be rather more prevalent in skeletal Angle class I (P < 0.05). Few dental traits were positively and moderately or strongly correlated with each other (Spearman Rho ≥ 0.4, P < 0.0005).ConclusionsSex dimorphism was uncommon in nonmetric dental traits/anomalies. Skeletal malocclusions may be associated with a few dental abnormalities or variations.
| S-EPMC9701365 | biostudies-literature
Project description:BackgroundThe evidence in the literature suggests that some skeletal or dental malocclusions are involved with dental development, resulting in advanced or delayed dental age (DA). The purpose of this systematic review was to investigate the association between DA and different types of malocclusions.MethodsThe search was carried out on PubMed, Scopus, Web of Science, Virtual Health Library, and in the gray literature. Observational studies that evaluated the association between DA and sagittal, vertical, or transversal malocclusions were included. The quality assessment was performed using the Newcastle-Ottawa Scale (NOS). The data from primary studies were narratively synthesized. The certainty of evidence was evaluated using the GRADE approach. The study was conducted from August 2023 to October 2023.ResultsOne Thousand Nine Hundred Ninety-One records were identified in the initial search. Twenty (n = 20) studies were included. Most of the studies (n=15) presented a moderate quality according to NOS. Twelve studies evaluated the association between DA and sagittal discrepancies; eight studies evaluated vertical discrepancies, and only one study analyzed a transversal discrepancy. Demirjian's method for DA assessment was the most used among the studies. The primary studies observed that patients of both sexes presenting a vertical growth pattern and males with skeletal Class III malocclusion tend to have advanced DA. The study that investigated transversal malocclusion found that unilateral posterior cross-bite is associated with delayed DA. The certainty of evidence was very low for all outcomes evaluated.ConclusionDA may be associated with the type of malocclusion. It is suggested that DA can be used as an initial diagnostic tool in orthodontics. Future well-designed studies should be performed in order to investigate the association between DA and different types of malocclusions in more detail.Trial registrationThis study was registered in the PROSPERO database (CRD42023454207).
| S-EPMC10964512 | biostudies-literature
Project description:Studies heretofore have shown inconsistent results on the link of ASD to malocclusion. Herein, we aimed to compare the prevalence of malocclusion among children and adolescents with ASD compared with non-ASD healthy counterparts through a systematic review. The electronic search focused on five databases, PubMed, Web of Science, EMBASE, LILACS, and OpenGrey until January 2022, and followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines (PROSPERO No. CRD42022298023). Observational and intervention studies that compared occlusion characteristics of ASD individuals under 18 years old with healthy controls were included. Pairwise random effects meta-analyses of odds ratio (OR) were performed. Methodological quality was assessed by using the Joanna Briggs Institute Critical Appraisal Checklist for cross-sectional studies. A total of thirteen studies were included for qualitative analysis, and seven for quantitative analysis. The results presented a great heterogeneity and moderate risk of bias; thus, it was not possible to state that there is a risk of malocclusion in individuals with ASD. Future studies should be carried out with strict criteria in the choice of samples, control group, and diagnosis of malocclusion in order to meet the necessary requirements for greater methodological quality.
| S-EPMC9147636 | biostudies-literature
Project description:The purpose of this cross-sectional research was to explore the relationship of the mandibular dental and basal bone archforms between severe Skeletal Class II (SC2) and Skeletal Class III (SC3) malocclusions. We also compared intercanine and intermolar widths in these two malocclusion types. Thirty-three virtual pretreatment mandibular models (Skeletal Class III group) and Thirty-five Skeletal Class II group pretreatment models were created with a laser scanning system. FA (the midpoint of the facial axis of the clinical crown)and WALA points (the most prominent point on the soft-tissue ridge)were employed to produce dental and basal bone archforms, respectively. Gained scatter diagrams of the samples were processed by nonlinear regression analysis via SPSS 17.0. The mandibular dental and basal bone intercanine and intermolar widths were significantly greater in the Skeletal Class III group compared to the Skeletal Class II group. In both groups, a moderate correlation existed between dental and basal bone arch widths in the canine region, and a high correlation existed between dental and basal bone arch widths in the molar region. The coefficient of correlation of the Skeletal Class III group was greater than the Skeletal Class II group. Fourth degree, even order power functions were used as best-fit functions to fit the scatter plots. The radius of curvature was larger in Skeletal Class III malocclusions compared to Skeletal Class II malocclusions (rWALA3>rWALA2>rFA3>rFA2). In conclusion, mandibular dental and basal intercanine and intermolar widths were significantly different between the two groups. Compared with Skeletal Class II subjects, the mandibular archform was more flat for Skeletal Class III subjects.
| S-EPMC4074102 | biostudies-literature
Project description:The purpose of this study was to systematically review the literature regarding the prevalence of malocclusion and different orthodontic features in children and adolescents.MethodsThe digital databases PubMed, Cochrane, Embase, Open Grey, and Web of Science were searched from inception to November 2021. Epidemiological studies, randomized controlled trials, clinical trials, and comparative studies involving subjects ≤ 18 years old and focusing on the prevalence of malocclusion and different orthodontic features were selected. Articles written in English, Dutch, French, German, Spanish, and Portuguese were included. Three authors independently assessed the eligibility, extracted the data from, and ascertained the quality of the studies. Since all of the included articles were non-randomized, the MINORS tool was used to score the risk of bias.ResultsThe initial electronic database search identified a total of 6775 articles. After the removal of duplicates, 4646 articles were screened using the title and abstract. A total of 415 full-text articles were assessed, and 123 articles were finally included for qualitative analysis. The range of prevalence of Angle Class I, Class II, and Class III malocclusion was very large, with a mean prevalence of 51.9% (SD 20.7), 23.8% (SD 14.6), and 6.5% (SD 6.5), respectively. As for the prevalence of overjet, reversed overjet, overbite, and open bite, no means were calculated due to the large variation in the definitions, measurements, methodologies, and cut-off points among the studies. The prevalence of anterior crossbite, posterior crossbite, and crossbite with functional shift were 7.8% (SD 6.5), 9.0% (SD 7.34), and 12.2% (SD 7.8), respectively. The prevalence of hypodontia and hyperdontia were reported to be 6.8% (SD 4.2) and 1.8% (SD 1.3), respectively. For impacted teeth, ectopic eruption, and transposition, means of 4.9% (SD 3.7), 5.4% (SD 3.8), and 0.5% (SD 0.5) were found, respectively.ConclusionsThere is an urgent need to clearly define orthodontic features and malocclusion traits as well as to reach consensus on the protocols used to quantify them. The large variety in methodological approaches found in the literature makes the data regarding prevalence of malocclusion unreliable.
| S-EPMC9223594 | biostudies-literature
Project description:The aim of this study was to evaluate the association between tooth agenesis and skeletal malocclusions in Brazilian non-syndromic orthodontic patients.Pretreatment orthodontic records of 348 patients of both genders and with various skeletal malocclusions were examined. Tooth agenesis was evaluated in panoramic radiographs. Angular measurements were taken from lateral cephalometric radiographs to classify the patient's malocclusion as skeletal Class I, Class II and Class III. Subjects were divided into 2 groups, "with tooth agenesis" and "without tooth agenesis". Chi-square or Fisher exact test was used to compare categorical data. ANOVA with Tukey's post-test was used for means comparisons. An alpha of 5% was established.From 348 analysed patients, 28 presented tooth agenesis. There was no difference between genders (P = 0.27) nor mean age (P = 0.16). The most prevalent skeletal malocclusion was Class I (63.11%), followed by Class II (25.94%), and Class III (10.95%). The mean of congenitally missing teeth was 1.3 (SD 0.13). Thirteen subjects had premolar agenesis, 13 upper lateral incisor agenesis, 4 lower incisor agenesis and 2 molars agenesis. The group with tooth agenesis presented A point-nasion-B point (ANB) angle smaller (1.66 [SD 2.52]) than the group without tooth agenesis (2.86 [SD 2.49]) (P = 0.01). ANB angle had a negative correlation with the number of congenitally missing teeth (P = 0.039; r = -0.39).Tooth agenesis is associated with a smaller A point-nasion-B point angle and is negatively correlated with the number of congenitally missing teeth.
| S-EPMC5541988 | biostudies-other
Project description:ObjectiveTo systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry.Materials and methodsSix electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively.ResultsThe preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability.ConclusionDespite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required.Clinical relevanceThe present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.
| S-EPMC10995046 | biostudies-literature
Project description:Non-syndromic orofacial clefts encompass a range of morphological changes affecting the oral cavity and the craniofacial skeleton, of which the genetic and epigenetic etiologic factors remain largely unknown. The objective of this study is to explore the contribution of underlying dentofacial deformities (also known as skeletal malocclusions) in the craniofacial morphology of non-syndromic cleft lip and palate patients (nsCLP). For that purpose, geometric morphometric analysis was performed using full skull cone beam computed tomography (CBCT) images of patients with nsCLP (n = 30), normocephalic controls (n = 60), as well as to sex- and ethnicity- matched patients with an equivalent dentofacial deformity (n = 30). Our outcome measures were shape differences among the groups quantified via principal component analysis and associated principal component loadings, as well as mean shape differences quantified via a Procrustes distance among groups. According to our results, despite the shape differences among all three groups, the nsCLP group shares many morphological similarities in the maxilla and mandible with the dentofacial deformity group. Therefore, the dentoskeletal phenotype in nsCLP could be the result of the cleft and the coexisting dentofacial deformity and not simply the impact of the cleft.
| S-EPMC7151201 | biostudies-literature