Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Electrical Conductivity of Molten Oxide-Fluoride Cryolite Mixtures.

ABSTRACT: A new way to reduce the energy consumption during the operation of powerful aluminum reduction cells is suggested via reducing the resistance of the electrolyte, i.e., increasing its electrical conductivity. The electrical conductivity of molten cryolite mixtures NaF-AlF₃-CaF₂-Al₂O₃ with cryolite ratio (CR) of 2.1-3.0 and content of CaF₂ and Al₂O₃, up to 8 wt%, was measured at the temperatures from liquidus to 1300 K. Based on the experimental results, a multifunctional equation for the electrical conductivity of oxide-fluoride cryolite melts was evaluated. The experimental and calculated values of the electrical conductivity agree within 1.5%. The activation energy of the electrical conductivity of the NaF-AlF₃-CaF₂-Al₂O₃ melts was estimated. The activation energy of electrical conductivity for molten NaF-AlF₃ mixtures with CR 3.0 and 2.1, determined by the most mobile cations Na⁺, increased from 15.8 kJ/mol up to 18.5 kJ/mol. It was found that CR had a greater impact on the activation energy than the changes in the Al₂O₃ or CaF₂ concentrations. Based on the ratio of the activation energies of the electrical conductivity and the viscous flow, the correlation between the electrical conductivity and viscosity of molten cryolite mixtures NaF-AlF₃-CaF₂-Al₂O₃ was illustrated.

SUBMITTER: Arkhipov P

PROVIDER: S-EPMC8658855 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Thermal Conductivity of Molten Carbonates with Dispersed Solid Oxide from Differential Scanning Calorimetry.

Project description:Recently, there has been a noticeable increase in the applications of composite mixtures containing molten salt and solid oxide for thermal energy conversion and storage systems. This highlights that thermal conductivity of the composites are central for the purpose of designing and devising processes. Measuring the thermal conductivity of molten samples at elevated temperatures remains challenging. In this study, the possibility to use heat flux differential scanning calorimetry (DSC) to measure the thermal conductivity of molten samples at elevated temperatures is reported for the first time. The thermal conductivity of composite mixtures containing eutectic (Li,Na)2CO3 with and without selected solid oxides at ~675 °C was determined by using the proposed DSC approach. This mixture is a candidate for high temperature waste heat conversion to electric energy. In the DSC measurement program, steps with repeated thermal cycles between 410 and 515 °C were included to limit the effect of the interface thermal contact resistance. The determined values 0.826 ± 0.001, and 0.077 ± 0.004 W m-1K-1 for the carbonate mixtures with and without solid MgO were found to match the reliable analysis at similar conditions.

| S-EPMC6539058 | biostudies-literature

Interaction between stem cells and CNT@graphene oxide nanoribbon bilayer membrane with similar structure and different electrical conductivity.

Project description:We report the potential modulation effects of electroconductivity itself for neural stem/progenitor cells.

2024-10-02 | GSE241362 | GEO

Enhancement in electrical conductivity of liquid crystals by graphene metal oxide composites.

Project description:Enhancing the electrical conductivity of liquid crystal (LC) circumvents challenges for application in advanced electronic components. Toward this, using additives made of different nanostructures that could result in functional LCs is suggested. In this paper, various concentrations of graphene (Gr)/metal-oxide (Fe3O4) nanocomposite (GMN) (0.0001-1 w%) were added to E7 nematic LC. We found that the role of anisotropic Gr flakes, their edges as well as surface-decorated-metal-oxide-additives have significant impact on electrical properties of E7. A range of appropriate additives of such a nanocomposite enhances the electrical conductivity of LCs. This effect can be traced through the decrease in the formation of GMN aggregates in the E7 and increase in the electrostatic field at the edges of the Gr sheets. Moreover, the presence of metal-oxide nanoclusters due to the presence of oxygen vacancies and defects facilitates the construction of conductive network for improving the charge transfer pathways and contributes to a stronger interaction of the Gr surface with charged species. These factors can provide Gr layers as dipole moments and lead to signal propagation in the dielectric medium. Our finding conveys a pathway toward significant enhancement of electrical conductivity in the LC family which can be useful for functional applications.

| S-EPMC10356762 | biostudies-literature

Thermal Conductivity and Electrical Resistivity of Melt-Mixed Polypropylene Composites Containing Mixtures of Carbon-Based Fillers.

Project description:Melt-mixed composites based on polypropylene (PP) with various carbon-based fillers were investigated with regard to their thermal conductivity and electrical resistivity. The composites were filled with up to three fillers by selecting combinations of graphite nanoplatelets (GNP), carbon fibers (CF), carbon nanotubes (CNT), carbon black (CB), and graphite (G) at a constant filler content of 7.5 vol%. The thermal conductivity of PP (0.26 W/(m·K)) improved most using graphite nanoplatelets, whereas electrical resistivity was the lowest when using multiwalled CNT. Synergistic effects could be observed for different filler combinations. The PP composite, which contains a mixture of GNP, CNT, and highly structured CB, simultaneously had high thermal conductivity (0.5 W/(m·K)) and the lowest electrical volume resistivity (4 Ohm·cm).

| S-EPMC6630210 | biostudies-literature

Control of electrical conductivity of highly stacked zinc oxide nanocrystals by ultraviolet treatment.

Project description:Zinc oxide (ZnO) nanocrystals (NCs) were synthesized using a modified sol-gel method. Ultraviolet (UV) treatment was performed under various atmospheres on the highly stacked ZnO NCs. The prepared NCs were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, photoluminescence spectroscopy, and atomic force microscopy to investigate their structural, electrical, and electrochemical properties. Through these analyses, the effect of the UV treatment on the chemical and electrical characteristics of ZnO NCs was established. According to the analyses, the organic ligands in the NCs were decomposed, and the particles were densified. The mobility of UV-treated ZnO NCs thin films increased to 1.4 cm2/Vs, almost 2 orders higher than the UV untreated ZnO thin films. It was confirmed that the recombination from oxygen vacancies of ZnO could be controlled by UV irradiation. As decreased oxygen vacancies, the band gap of ZnO NCs was increased from 3.2 eV to 3.27 eV.

| S-EPMC6472384 | biostudies-literature

Improved Electrical Signal of Non-Poled 3D Printed Zinc Oxide-Polyvinylidene Fluoride Nanocomposites.

Project description:Polyvinylidene fluoride (PVDF) presents highly useful piezo and pyro electric properties but they are predicated upon the processing methods and the ensuing volume fraction of the β-phase. Production of PVDF with higher β-phase content for additive manufacturing (AM) is particularly desirable because it can enable the creation of custom parts with enhanced properties. Necessary steps from compounding to the testing of a 3D printed piezo sensitive sensor are presented in this paper. AM process variables and the influence of zinc oxide (ZnO) nanofiller on crystallinity, viscosity, and electromechanical properties of PVDF, have been explored. Fourier-transform infrared spectroscopy (FTIR) measurements confirm that a high cooling rate (HCR) of 30 °C min-1 promotes the conversion of the α-into the β-phase, reaching a maximum of 80% conversion with 7.5-12.5% ZnO content. These processing conditions increase the elastic modulus up to 40%, while maintaining the ultimate strength, ≈46 MPa. Furthermore, HCR 10% ZnO-PVDF produces four times higher volts per Newton when compared to low cooling rate, 5 °C min-1, pristine PVDF. A piezoelectric biomedical sensor application has been presented using HCR and ZnO nanofiller. This technique also reduces the need for post-poling which can reduce manufacturing time and cost.

| S-EPMC9610290 | biostudies-literature

Direct Reduction of Graphene Oxide/Nanofibrillated Cellulose Composite Film and its Electrical Conductivity Research.

Project description:With the rapid development of wearable and portable electronic devices, it is increasingly important to develop conductive paper-like films (CPFs) with the characteristics of light, thin and self-supporting. In this paper, nanofibrillated cellulose (NFC) was used as reinforcing phase of film-forming to combine with graphene oxide (GO). Then graphene-based CPFs were prepared by directly reducing the GO/NFC composite film without any additional adhesives, which effectively avoided the difficulties of dispersion and combination with other materials caused by direct using of high content graphene. Meanwhile, three representative reduction methods for direct reduction of GO/NFC composite films were also compared. The results show that 450 °C thermal reduction and hydroiodic acid reduction were more effective than ascorbic acid reduction. On this basis, hydroiodic acid reduction and thermal reduction were used to discuss the effect of NFC addition to the conductivity of the film. This occured when increasing the content of NFC from 10% to 50%, the electrical conductivity of the composite film by hydroiodic acid reduction decreased from 153.8 S/m to 22.2 S/m. While the conductivity of composite film increased first and then decreased after thermal reduction both at 450 °C and 550 °C. What's more, when NFC content was about 16.6% the electrical conductivity reached a high level which was 86.21 S/m and 168.9 S/m, respectively. This study provides a groundwork for the further development of graphene-based CPFs with low square resistance and high conductivity in large-scale preparation.

| S-EPMC7033249 | biostudies-literature

Influence of preferred orientation on the electrical conductivity of fluorine-doped tin oxide films.

Project description:Current development of high-performance transparent conductive oxide (TCO) films is limited with tradeoff between carrier mobility and concentration since none of them can be improved without sacrificing the other. In this study, we prepare fluorine doped tin oxide (FTO) films by chemical vapor deposition with inclusions of different additives and report that the mobility can be varied from 0.65 to 28.5 cm(2) V(-1) s(-1) without reducing the achieved high carrier concentration of 4 × 10(20) cm(-3). Such an increase in mobility is shown to be clearly associated with the development of (200) preferred orientation (PO) but concurrent degradation of (110) PO in films. Thus, at a constant high carrier concentration, the electrical conductivity can be improved via carrier mobility simply by PO control. Such a one-step approach avoiding conventional post-deposition treatment is suggested for developing next-generation FTO as well as other TCO films with better than ever conductivities.

| S-EPMC3890905 | biostudies-literature

Electrical conductivity of ice VII.

Project description:It was discovered that a peak appears near a pressure of Pc = 10 GPa in the electrical conductivity of ice VII as measured through impedance spectroscopy in a diamond anvil cell (DAC) during the process of compression from 2 GPa to 40 GPa at room temperature. The activation energy for the conductivity measured in the cooling/heating process between 278 K and 303 K reached a minimum near Pc. Theoretical modelling and molecular dynamics simulations suggest that the origin of this unique peak is the transition of the major charge carriers from the rotational defects to the ionic defects.

| S-EPMC4105784 | biostudies-literature

Electrical Conductivity and Dielectric Properties of Ethylene Glycol-Based Nanofluids Containing Silicon Oxide-Lignin Hybrid Particles.

Project description:This paper presents results of experimental investigation into dielectric properties of silicon oxide lignin (SiO2-L) particles dispersed with various mass fractions in ethylene glycol (EG). Measurements were conducted at a controlled temperature, which was changed from 298.15 to 333.15 K with an accuracy of 0.5 and 0.2 K for dielectric properties and direct current (DC) electrical conductivity, respectively. Dielectric properties were measured with a broadband dielectric spectroscopy device in a frequency range from 0.1 to 1 MHz, while DC conductivity was investigated using a conductivity meter MultiLine 3410 working with LR925/01 conductivity probe. Obtained results indicate that addition of even a small amount of SiO2-L nanoparticles to ethylene glycol cause a significant increase in permittivity and alternating current (AC) conductivity as well as DC conductivity, while relaxation time decrease. Additionally, both measurement methods of electrical conductivity are in good agreement.

| S-EPMC6669770 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data