Comfort Evaluation of Slow-Recovery Ejection Seat Cushions Based on Sitting Pressure Distribution.
Ontology highlight
ABSTRACT:
SUBMITTER: Bao J
PROVIDER: S-EPMC8669618 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:To determine the efficacy of skin protection wheelchair seat cushions in preventing pressure ulcers in the elderly nursing home population.Clinical trial with participants assigned at random to a skin protection or segmented foam cushion. Two hundred thirty-two participants were recruited between June 2004 and May 2008 and followed for 6 months or until pressure ulcer incidence.Twelve nursing homes.Nursing home residents aged 65 and older who were using wheelchairs for 6 or more hours per day and had a Braden score of 18 or less and a combined Braden activity and mobility score of 5 or less. Participants were recruited from a referred sample.All participants were provided with a fitted wheelchair and randomized into skin protection (SPC, n=113) or segmented foam (SFC, n=119) cushion groups. The SPC group received an air, viscous fluid and foam, or gel and foam cushion. The SFC group received a 7.6-cm crosscut foam cushion.Pressure ulcer incidence over 6 months for wounds near the ischial tuberosities (IT ulcers) were measured. Secondary analysis was performed on combined IT ulcers and ulcers over the sacrum and coccyx (sacral ulcers).One hundred eighty participants reached a study end point, and 42 were lost to follow-up. Ten did not receive the intervention. There were eight (6.7%) IT ulcers in the SFC group and one (0.9%) in the SPC group (P=.04). There were 21 (17.6%) combined IT and sacral ulcers in the SFC group and 12 (10.6%) in the SPC group (P=.14).Skin protection cushions used with fitted wheelchairs lower pressure ulcer incidence for elderly nursing home residents and should be used to help prevent pressure ulcers.
| S-EPMC3065866 | biostudies-literature
Project description:BackgroundIn today's economy, workers spend increasingly more time in seated positions, leading to a growing scientific interest in chair design. In this study we used body pressure distribution tests to compare a novel bamboo chair with unique structural features to other commonly-used chairs. We studied the bamboo sheet chair's physical characteristics and comfort to provide a scientific theoretical basis for common use seat design.MethodsA total of 25 (14 male and 11 female) subjects participated in the study. Subjects were divided into six groups according to their body characteristics parameters included stature, weight, shoulder breadth, hip breadth, waist width, popliteal height, buttocks-popliteal length, and buttock-abdomen depth, with three groups for males and three groups for females. Each subject was required to complete specified body pressure tests for three different experimental chairs for three minutes and subjective comfort evaluations were also administered. The pressure indexes were measured from the seat pan and backrest and calculated with MATLAB 2015b, which mainly included maximum pressure (Pm), average pressure (Pa), pressure exponent (Pe) and contact area index (P AI ). Three pressure threshold limits of 0.67 kPa, 4.00 kPa and 9.33 kPa and four contact surface indexes were used in the experiment to reflect the contact area between human and chair.ResultsThe contact areas in the backrest (52.96 ± 32.94 cm2) and seat pan (307.75 ± 90.31 cm2) in the middle-to-high threshold pressure range, and the contact areas of the backrest (4.34 ± 5.95 cm2) in the high threshold pressure range of bamboo sheet chair were smaller than the corresponding indexes of the common office chair (81.430 ± 45.04 cm2, p = 0.00; 394.39 ± 98.99 cm2, p = 0.02; 13.54 ± 12.00 cm2, p = 0.00, respectively). The pressure index (2.68 ± 0.88 kPa), maximum pressure (6.66 ± 2.05 kPa), and average pressure (2.42 ± 0.59 kPa) values of the bamboo sheet chair backrest were also found to be lower than those of the office chair (4.32 ± 1.62 kPa, p = 0.00; 10.50 ± 3.88 kPa, p = 0.00; 3.43 ± 0.97 kPa, p = 0.00, respectively). The average pressure on the seat pan was greater than 4 kPa for all subjects, while the average pressure on the seat pan was greater than 9.33 kPa for male subjects with a body mass index (BMI) of 27.48.DiscussionThe bamboo sheet chair's contact areas within the middle-to-high and high-pressure threshold ranges of the backrest and seat pan were smaller than those of the office chair, indicating that the bamboo sheet chair is effective at relieving pressure. Human body characteristics must be considered in the design of seat functional size. Buttocks-popliteal length, weight, body mass index, body shape and weight distribution, all have important effects on the distribution of body pressure at the human-chair interface.
| S-EPMC7334977 | biostudies-literature
Project description:An earlier study suggested that the activity-inviting office landscape called "The End of Sitting", designed by Rietveld Architecture Art Affordances (RAAAF), should be considered as an alternative working environment to prevent sedentary behavior. The End of Sitting lacks chairs and tables but consists instead of a myriad of sloped surfaces at different heights that afford workers to stand, lean or recline at different locations. In this study, we assessed the impact of four of its workspaces on physical intensity, temporary comfort and productivity of office work and compared the outcomes with sitting and standing behind a desk. Twenty-four participants worked for 10 minutes in each of the six test conditions. Energy expenditure, measured by indirect calorimetry, and heart rate were recorded. Questionnaires were used to assess the perceived comfort. The number of words found in the word search test was counted as a measure of productivity. The majority of The End of Sitting workspaces led to a significant increase in energy expenditure compared with sitting behind a desk (ps < .05). Average MET values ranged from 1.40 to 1.58 which is a modest rise in energy expenditure compared to sitting (1.32 METs) and not significantly different from standing (1.47 METs). The scores on the general comfort scale indicated that some workspaces were less comfortable than sitting (ps < .05), but the vast majority of participants reported that at least one of The End of Sitting workspaces was equally or more comfortable than sitting. No differences in productivity between the test conditions were found. Further long-term studies are required to assess the behavioral adaptations, productivity and the level of comfort when using The End of Sitting as a permanent office.
| S-EPMC5681262 | biostudies-literature
Project description:Many older adults suffer injuries due to falls as the ability to safely move between sitting and standing degrades. Unfortunately, while existing measures describe sit-to-stand (STS) performance, they do not directly measure the conditions for balance. To gain insight into the effect of age on STS balance, we analyzed how far 8 older and 10 young adults strayed from a state of static balance and how well each group maintained dynamic balance. Static balance was evaluated using the position of the center-of-mass (COM) and center-of-pressure (COP), relative to the functional base-of-support (BOS). As the name suggests, static balance applies when the linear and angular velocity of the body is small in magnitude, in the range of that observed during still standing. Dynamic balance control was evaluated using a model-based balance metric, the foot-placement-estimator (FPE), relative to the COP and BOS. We found that the older adults stay closer to being statically balanced than the younger participants. The dynamic balance metrics show that both groups keep the FPE safely within the BOS, though the older adults maintain a larger dynamic balance margin. Both groups exhibit similar levels of variability in these metrics. Thus, the conservative STS performance in older adults is likely to compensate for reduced physical ability or reduced confidence, as their dynamic balance control does not seem affected. The presented analysis of both static and dynamic balance allows us to distinguish between STS performance and balance, and as such can contribute to the identification of those older adults prone to falling, thus ultimately reducing the number of falls during STS transfers.
| S-EPMC7739623 | biostudies-literature
Project description:BackgroundCustom orthoses are becoming more commonly prescribed for upper and lower limbs. They require some form of shape-capture of the body parts they will be in contact with, which generates an STL file that designers prepare for manufacturing. For larger devices such as custom-contoured wheelchair cushions, the STL created during shape-capture can contain hundreds of thousands of tessellations, making them difficult to alter and prepare for manufacturing using mesh-editing software. This study covers the development and testing of a mesh-to-surface workflow in a parametric computer-aided design software using its visual programming language such that STL files of custom wheelchair cushions can be efficiently converted into a parametric single surface.MethodsA volunteer in the clinical space with expertise in computer-aided design aided was interviewed to understand and document the current workflow for creating a single surface from an STL file of a custom wheelchair cushion. To understand the user needs of typical clinical workers with little computer-aided design experience, potential end-users of the process were tasked with completing the workflow and providing feedback during the experience. This feedback was used to automate part of the computer-aided design process using a visual programming tool, creating a new semi-automated workflow for mesh-to-surface translation. Both the original and semi-automated process were then evaluated by nine volunteers with varying levels of computer-aided design experience.ResultsThe semi-automated process showed a 37% reduction in the total number of steps required to convert an STL model to a parametric surface. Regardless of previous computer-aided design experience, volunteers completed the semi-automated workflow 31% faster on average than the manual workflow.ConclusionsThe creation of a semi-automated process for creating a single parametric surface of a custom wheelchair cushion from an STL mesh makes mesh-to-surface conversion more efficient and more user-friendly to all, regardless of computer-aided design experience levels. The steps followed in this study may guide others in the development of their own mesh-to-surface tools in the wheelchair sector, as well as those creating other large custom prosthetic devices.
| S-EPMC9926538 | biostudies-literature
Project description:Introduction: Introduction: Pressure ulcer is one of the most common and painful complications in patients admitted to intensive care units (ICUs). This study aimed to compare the effects of tragacanth gel cushions and foam-filled ones on the prevention of pressure ulcers. Methods: This triple-blind, randomized, clinical trial was performed on 94 patients admitted to the ICU of Taleqhani Hospital of Mashhad, Iran. The participants were divided into two groups of tragacanth gel pad and foam (n=47 for each group). Both groups received all the routine care. The participants were examined on a daily basis during a ten-day period. We considered sacral region as the most affected site, and the patients with erythema were excluded from the study. To analyze the data, Chi-squared test, Fisher's exact test, and t-test were run, using Stata version 12. Results: The data showed significant differences in terms of the incidence of skin redness in the tragacanth gel cushions group and foam cushion group, respectively, 6.84 (1.58) and 5.67 (1.26) days after admission. In addition, in the tragacanth gel cushions group 14 patients (29.7%) did not have skin redness compared with the foam cushion group (8.51%), which indicated a significant difference. Conclusion: This study showed that the use of tragacanth gel cushion is effective in the prevention of pressure ulcers in ICU patients. Cushions filled with tragacanth gel also delayed the onset of erythema. Considering their cost-effectiveness and naturalness, the use of tragacanth gel cushions is recommended to improve the sacral skin health and prevent pressure ulcers.
| S-EPMC6428161 | biostudies-literature
Project description:To facilitate recovery from hypoxia, many freedivers use a breathing method called "hook breathing" (HB) after diving, involving an interrupted exhale to build up intrapulmonary pressure. Some divers experience a delay in recovery of arterial oxygen saturation (SaO2) after diving, interpreted as symptoms of mild pulmonary edema, and facilitated recovery may be especially important in this group to avoid hypoxic "blackout." We examined the influence of HB on recovery of SaO2 in freedivers with slow recovery (SR) and fast recovery (FR) of SaO2 after deep "free immersion" (FIM) apnea dives to 30 m depth. Twenty-two male freedivers, with a mean (SD) personal best in the discipline FIM of 57(26) m, performed two 30 m deep dives, one followed by HB and one using normal breathing (NB) during recovery, at different days and weighted order. SaO2 and heart rate (HR) were measured via pulse oximetry during recovery. The SR group (n = 5) had a faster SaO2 recovery using HB, while the FR group (n = 17) showed no difference between breathing techniques. At 105 s, the SR group reached a mean (SD) SaO2 of 95(5)% using HB, while using NB, their SaO2 was 87(5)% (p < 0.05), and 105-120 s after surfacing SaO2 was higher with HB (p < 0.05). In SR subjects, the average time needed to reach 95% SaO2 with HB was 60 s, while it was 120 s at NB (p < 0.05). HR was similar in the SR group, while it was initially elevated at HB in the FR group (p < 0.05). We conclude that HB efficiently increases SaO2 recovery in SR individuals, but not in the FR group. The proposed mechanism is that increased pulmonary pressure with HB will reverse any pulmonary edema and facilitate oxygen uptake in divers with delayed recovery.
| S-EPMC6729099 | biostudies-literature
Project description:PurposeThis study compared cognitive (attention, learning, and memory) and typing outcomes during slow treadmill walking or sitting. Seventy-five healthy individuals were randomly assigned to a treadmill walking group (n=37; 23 female) or sitting group (n=38; 17 female).MethodsThe treadmill walking group completed a series of tests while walking at 1.5 mph. The sitting group performed the same tests while sitting at a standard desk. Tests performed by both groups included: the Rey Auditory Verbal Learning Test and a modified version of the Paced Auditory Serial Attention Test. In addition, typing performance was evaluated.ResultsParticipants in the treadmill walking group performed worse on the Rey Auditory Verbal Learning Test for total learning than the sitting group; the main effect was significant (F(1,73)=4.75, p=0.03, ?p2=0.06); however, short- and long-delay recall performance did not differ between groups (p>0.05). For the Paced Auditory Serial Attention Test, total number of correct responses was lower in the treadmill walking group relative to the sitting group; the main effect was significant (F(1,73)=4.97, p=0.03, ?p2=0.06). The performance of both groups followed the same learning slope (Group x Trial interactions were not significant) for the Rey Auditory Verbal Learning Test and Paced Auditory Serial Attention Test. Individuals in the treadmill walking group performed significantly worse for all measures of typing (p<0.05).ConclusionWalking on a treadmill desk may result in a modest difference in total learning and typing outcomes relative to sitting, but those declines may not outweigh the benefit of the physical activity gains from walking on a treadmill.
| S-EPMC4398464 | biostudies-literature
Project description:Brain tissue oxygen (PbtO2) monitoring in traumatic brain injury (TBI) has demonstrated strong associations with global outcome. Additionally, PbtO2 signals have been used to derive indices thought to be associated with cerebrovascular reactivity in TBI. However, their true relationship to slow-wave vasogenic fluctuations associated with cerebral autoregulation remains unclear. The goal of this study was to investigate the relationship between slow-wave fluctuations of intracranial pressure (ICP), mean arterial pressure (MAP) and PbtO2 over time. Using the Collaborative European NeuroTrauma Effectiveness Research in Traumatic Brain Injury (CENTER-TBI) high resolution ICU sub-study cohort, we evaluated those patients with recorded high-frequency digital intra-parenchymal ICP and PbtO2 monitoring data of a minimum of 6 h in duration. Digital physiologic signals were processed for ICP, MAP, and PbtO2 slow-waves using a moving average filter to decimate the high-frequency signal. The first 5 days of recording were analyzed. The relationship between ICP, MAP and PbtO2 slow-waves over time were assessed using autoregressive integrative moving average (ARIMA) and vector autoregressive integrative moving average (VARIMA) modelling, as well as Granger causality testing. A total of 47 patients were included. The ARIMA structure of ICP and MAP were similar in time, where PbtO2 displayed different optimal structure. VARIMA modelling and IRF plots confirmed the strong directional relationship between MAP and ICP, demonstrating an ICP response to MAP impulse. PbtO2 slow-waves, however, failed to demonstrate a definite response to ICP and MAP slow-wave impulses. These results raise questions as to the utility of PbtO2 in the derivation of cerebrovascular reactivity measures in TBI. There is a reproducible relationship between slow-wave fluctuations of ICP and MAP, as demonstrated across various time-series analytic techniques. PbtO2 does not appear to reliably respond in time to slow-wave fluctuations in MAP, as demonstrated on various VARIMA models across all patients. These findings suggest that PbtO2 should not be utilized in the derivation of cerebrovascular reactivity metrics in TBI, as it does not appear to be responsive to changes in MAP in the slow-waves. These findings corroborate previous results regarding PbtO2 based cerebrovascular reactivity indices.
| S-EPMC8286934 | biostudies-literature
Project description:Background:Sitting posture may be related to risk factors, including inadequate weight-bearing support, particularly when maintained for long periods. Considering that body weight is loaded in a closed support system composed of the seat, backrest, floor and working surface, the aims of the present study were to describe the development of an ergonomic sitting workstation to continuously record weight-bearing at the seat, chair, backrest, work surface, and floor and to test its measurement properties: reproducibility, criterion-related validity, and sensitivity. Methods:Rigid bodies (1 to 30 kg) and participant weights were recorded to evaluate the workstation measurement properties. Results:Rigid body tests showed variation values less than 0.050 kg on reproducibility test and errors below 5% of measured value on criterion validity tests. Participant tests showed no statistically significant differences between repeated measures (p ? 0.40), errors were less than 2% of participant weights and sensitivity presented statistically significant changes (p = 0.007). Conclusion:The sitting workstation proposed showed to be reliable, valid and sensitive for use in future ergonomic studies to evaluate the sitting posture.
| S-EPMC6718046 | biostudies-literature