Regression calibration to correct correlated errors in outcome and exposure.
Ontology highlight
ABSTRACT:
SUBMITTER: Shaw PA
PROVIDER: S-EPMC8670514 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:There is increasingly widespread usage of cone-beam CT (CBCT) for guiding radiation treatment in advanced-stage lung tumors, but difficulties associated with daily CBCT in conventionally fractionated treatments include imaging dose to the patient, increased workload and longer treatment times. Respiration-correlated cone-beam CT (RC-CBCT) can improve localization accuracy in mobile lung tumors, but further increases the time and workload for conventionally fractionated treatments. This study investigates whether RC-CBCT-guided correction of systematic tumor deviations in standard fractionated lung tumor radiation treatments is more effective than 2D image-based correction of skeletal deviations alone. A second study goal compares respiration-correlated vs respiration-averaged images for determining tumor deviations.Eleven stage II-IV nonsmall cell lung cancer patients are enrolled in an IRB-approved prospective off-line protocol using RC-CBCT guidance to correct for systematic errors in GTV position. Patients receive a respiration-correlated planning CT (RCCT) at simulation, daily kilovoltage RC-CBCT scans during the first week of treatment and weekly scans thereafter. Four types of correction methods are compared: (1) systematic error in gross tumor volume (GTV) position, (2) systematic error in skeletal anatomy, (3) daily skeletal corrections, and (4) weekly skeletal corrections. The comparison is in terms of weighted average of the residual GTV deviations measured from the RC-CBCT scans and representing the estimated residual deviation over the treatment course. In the second study goal, GTV deviations computed from matching RCCT and RC-CBCT are compared to deviations computed from matching respiration-averaged images consisting of a CBCT reconstructed using all projections and an average-intensity-projection CT computed from the RCCT.Of the eleven patients in the GTV-based systematic correction protocol, two required no correction, seven required a single correction, one required two corrections, and one required three corrections. Mean residual GTV deviation (3D distance) following GTV-based systematic correction (mean ± 1 standard deviation 4.8 ± 1.5 mm) is significantly lower than for systematic skeletal-based (6.5 ± 2.9 mm, p = 0.015), and weekly skeletal-based correction (7.2 ± 3.0 mm, p = 0.001), but is not significantly lower than daily skeletal-based correction (5.4 ± 2.6 mm, p = 0.34). In two cases, first-day CBCT images reveal tumor changes-one showing tumor growth, the other showing large tumor displacement-that are not readily observed in radiographs. Differences in computed GTV deviations between respiration-correlated and respiration-averaged images are 0.2 ± 1.8 mm in the superior-inferior direction and are of similar magnitude in the other directions.An off-line protocol to correct GTV-based systematic error in locally advanced lung tumor cases can be effective at reducing tumor deviations, although the findings need confirmation with larger patient statistics. In some cases, a single cone-beam CT can be useful for assessing tumor changes early in treatment, if more than a few days elapse between simulation and the start of treatment. Tumor deviations measured with respiration-averaged CT and CBCT images are consistent with those measured with respiration-correlated images; the respiration-averaged method is more easily implemented in the clinic.
| S-EPMC3461048 | biostudies-other
Project description:In five experiments, we examined the conditions under which participants remembered true and false information given as feedback. Participants answered general information questions, expressed their confidence in the correctness of their answers, and were given true or false feedback. In all five experiments, participants hypercorrected when they had made a mistake; that is, they remembered better the correct feedback to errors made with high compared to low confidence. However, in none of the experiments did participants hyper'correct' when false feedback followed an initially correct response. Telling people whether the feedback was right or wrong made little difference, suggesting that people already knew whether the feedback was true or false and differentially encoded the true feedback compared to the false feedback. An exception occurred when false feedback followed an error: participants hyper'corrected' to this false feedback, suggesting that when people are wrong initially, they are susceptible to further incorrect information. These results indicate that people have some kind of privileged access to whether their answers are right or wrong, above and beyond their confidence ratings, and that they behave differently when trying to remember new "corrective" information depending upon whether they, themselves, were right or wrong initially. The likely source of this additional information is knowledge about the truth of the feedback, which they rapidly process and use to modulate memory encoding.
| S-EPMC6374496 | biostudies-other
Project description:In epidemiologic studies, measurement error in dietary variables often attenuates association between dietary intake and disease occurrence. To adjust for the attenuation caused by error in dietary intake, regression calibration is commonly used. To apply regression calibration, unbiased reference measurements are required. Short-term reference measurements for foods that are not consumed daily contain excess zeroes that pose challenges in the calibration model. We adapted two-part regression calibration model, initially developed for multiple replicates of reference measurements per individual to a single-replicate setting. We showed how to handle excess zero reference measurements by two-step modeling approach, how to explore heteroscedasticity in the consumed amount with variance-mean graph, how to explore nonlinearity with the generalized additive modeling (GAM) and the empirical logit approaches, and how to select covariates in the calibration model. The performance of two-part calibration model was compared with the one-part counterpart. We used vegetable intake and mortality data from European Prospective Investigation on Cancer and Nutrition (EPIC) study. In the EPIC, reference measurements were taken with 24-hour recalls. For each of the three vegetable subgroups assessed separately, correcting for error with an appropriately specified two-part calibration model resulted in about three fold increase in the strength of association with all-cause mortality, as measured by the log hazard ratio. Further found is that the standard way of including covariates in the calibration model can lead to over fitting the two-part calibration model. Moreover, the extent of adjusting for error is influenced by the number and forms of covariates in the calibration model. For episodically consumed foods, we advise researchers to pay special attention to response distribution, nonlinearity, and covariate inclusion in specifying the calibration model.
| S-EPMC4234679 | biostudies-literature
Project description:Eye tracking systems have recently experienced a diversity of novel calibration procedures, including smooth pursuit and vestibulo-ocular reflex based calibrations. These approaches allowed collecting more data compared to the standard 9-point calibration. However, the computation of the mapping function which provides planar gaze positions from pupil features given as input is mostly based on polynomial regressions, and little work has investigated alternative approaches. This paper fills this gap by providing a new calibration computation method based on symbolic regression. Instead of making prior assumptions on the polynomial transfer function between input and output records, symbolic regression seeks an optimal model among different types of functions and their combinations. This approach offers an interesting perspective in terms of flexibility and accuracy. Therefore, we designed two experiments in which we collected ground truth data to compare vestibulo-ocular and smooth pursuit calibrations based on symbolic regression, both using a marker or a finger as a target, resulting in four different calibrations. As a result, we improved calibration accuracy by more than 30%, with reasonable extra computation time.
| S-EPMC6420251 | biostudies-literature
Project description:In inertial body tracking, the human body is commonly represented as a biomechanical model consisting of rigid segments with known lengths and connecting joints. The model state is then estimated via sensor fusion methods based on data from attached inertial measurement units (IMUs). This requires the relative poses of the IMUs w.r.t. the segments-the IMU-to-segment calibrations, subsequently called I2S calibrations-to be known. Since calibration methods based on static poses, movements and manual measurements are still the most widely used, potentially large human-induced calibration errors have to be expected. This work compares three newly developed/adapted extended Kalman filter (EKF) and optimization-based sensor fusion methods with an existing EKF-based method w.r.t. their segment orientation estimation accuracy in the presence of model calibration errors with and without using magnetometer information. While the existing EKF-based method uses a segment-centered kinematic chain biomechanical model and a constant angular acceleration motion model, the newly developed/adapted methods are all based on a free segments model, where each segment is represented with six degrees of freedom in the global frame. Moreover, these methods differ in the assumed motion model (constant angular acceleration, constant angular velocity, inertial data as control input), the state representation (segment-centered, IMU-centered) and the estimation method (EKF, sliding window optimization). In addition to the free segments representation, the optimization-based method also represents each IMU with six degrees of freedom in the global frame. In the evaluation on simulated and real data from a three segment model (an arm), the optimization-based method showed the smallest mean errors, standard deviations and maximum errors throughout all tests. It also showed the lowest dependency on magnetometer information and motion agility. Moreover, it was insensitive w.r.t. I2S position and segment length errors in the tested ranges. Errors in the I2S orientations were, however, linearly propagated into the estimated segment orientations. In the absence of magnetic disturbances, severe model calibration errors and fast motion changes, the newly developed IMU centered EKF-based method yielded comparable results with lower computational complexity.
| S-EPMC4969842 | biostudies-literature
Project description:Addressing systematic measurement errors in self-reported data is a critical challenge in association studies of dietary intake and chronic disease risk. The regression calibration method has been utilized for error correction when an objectively measured biomarker is available; however, biomarkers for only a few dietary components have been developed. This paper proposes to use high-dimensional objective measurements to construct biomarkers for many more dietary components and to estimate the diet disease associations. It also discusses the challenges in variance estimation in high-dimensional regression methods and presents a variety of techniques to address this issue, including cross-validation, degrees-of-freedom corrected estimators, and refitted cross-validation (RCV). Extensive simulation is performed to study the finite sample performance of the proposed estimators. The proposed method is applied to the Women's Health Initiative cohort data to examine the associations between the sodium/potassium intake ratio and the total cardiovascular disease.
| S-EPMC10433218 | biostudies-literature
Project description:BACKGROUND: In addition to sequence conservation, protein multiple sequence alignments contain evolutionary signal in the form of correlated variation among amino acid positions. This signal indicates positions in the sequence that influence each other, and can be applied for the prediction of intra- or intermolecular contacts. Although various approaches exist for the detection of such correlated mutations, in general these methods utilize only pairwise correlations. Hence, they tend to conflate direct and indirect dependencies. RESULTS: We propose RMRCM, a method for Regularized Multinomial Regression in order to obtain Correlated Mutations from protein multiple sequence alignments. Importantly, our method is not restricted to pairwise (column-column) comparisons only, but takes into account the network nature of relationships between protein residues in order to predict residue-residue contacts. The use of regularization ensures that the number of predicted links between columns in the multiple sequence alignment remains limited, preventing overprediction. Using simulated datasets we analyzed the performance of our approach in predicting residue-residue contacts, and studied how it is influenced by various types of noise. For various biological datasets, validation with protein structure data indicates a good performance of the proposed algorithm for the prediction of residue-residue contacts, in comparison to previous results. RMRCM can also be applied to predict interactions (in addition to only predicting interaction sites or contact sites), as demonstrated by predicting PDZ-peptide interactions. CONCLUSIONS: A novel method is presented, which uses regularized multinomial regression in order to obtain correlated mutations from protein multiple sequence alignments. AVAILABILITY: R-code of our implementation is available via http://www.ab.wur.nl/rmrcm.
| S-EPMC3247924 | biostudies-literature
Project description:Massively univariate regression and inference in the form of statistical parametric mapping have transformed the way in which multi-dimensional imaging data are studied. In functional and structural neuroimaging, the de facto standard "design matrix"-based general linear regression model and its multi-level cousins have enabled investigation of the biological basis of the human brain. With modern study designs, it is possible to acquire multi-modal three-dimensional assessments of the same individuals--e.g., structural, functional and quantitative magnetic resonance imaging, alongside functional and ligand binding maps with positron emission tomography. Largely, current statistical methods in the imaging community assume that the regressors are non-random. For more realistic multi-parametric assessment (e.g., voxel-wise modeling), distributional consideration of all observations is appropriate. Herein, we discuss two unified regression and inference approaches, model II regression and regression calibration, for use in massively univariate inference with imaging data. These methods use the design matrix paradigm and account for both random and non-random imaging regressors. We characterize these methods in simulation and illustrate their use on an empirical dataset. Both methods have been made readily available as a toolbox plug-in for the SPM software.
| S-EPMC3408815 | biostudies-other
Project description:Detecting the temporally and spatially varying correlations is important to understand the biological and disease systems. Here we proposed a geographically weighted temporally correlated logistic regression (GWTCLR) model to identify such dynamic correlation of predictors on binomial outcome data, by incorporating spatial and temporal information for joint inference. The local likelihood method is adopted to estimate the spatial relationship, while the smoothing method is employed to estimate the temporal variation. We present the construction and implementation of GWTCLR and the study of the asymptotic properties of the proposed estimator. Simulation studies were conducted to evaluate the robustness of the proposed model. GWTCLR was applied on real epidemiologic data to study the climatic determinants of human seasonal influenza epidemics. Our method obtained results largely consistent with previous studies but also revealed certain spatial and temporal varying patterns that were unobservable by previous models and methods.
| S-EPMC5780421 | biostudies-literature
Project description:Bovine cloned and IVF blastocysts at day 7 were collected and used for comparative transcriptomics. A potent histone deacetylase inhibitor, Trichostatin A (TSA), was used to understand the effect of assisted epigenetic modification on the transcriptional profile of SCNT blastocysts and to identify specific genes or categories of genes affected in the developing embryos.
2014-05-03 | E-GEOD-57247 | biostudies-arrayexpress