Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The effect of anion architecture on the lubrication chemistry of phosphonium orthoborate ionic liquids.

ABSTRACT: Phosphonium ionic liquids with orthoborate anions have been studied in terms of their interfacial film formation, both physisorbed and sacrificial from chemical breakdown, in sheared contacts of varying harshness. The halogen-free anion architecture was varied through (i) the heteronuclear ring size, (ii) the hybridisation of the constituent atoms, and (iii) the addition of aryl functionalities. Time of Flight-Secondary Ion Mass Spectrometry analysis revealed the extent of sacrificial tribofilm formation allowing the relative stability of the ionic liquids under tribological conditions to be determined and their breakdown mechanisms to be compared to simple thermal decomposition. Overall, ionic liquids outperformed reference oils as lubricants; in some cases, sacrificial films were formed (with anion breakdown a necessary precursor to phosphonium cation decomposition) while in other cases, a protective, self-assembly lubricant layer or hybrid film was formed. The salicylate-based anion was the most chemically stable and decomposed only slightly even under the harshest conditions. It was further found that surface topography influenced the degree of breakdown through enhanced material transport and replenishment. This work thus unveils the relationship between ionic liquid composition and structure, and the ensuing inter- and intra-molecular interactions and chemical stability, and demonstrates the intrinsic tuneability of an ionic liquid lubrication technology.

SUBMITTER: Munavirov B

PROVIDER: S-EPMC8674318 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cyclic phosphonium ionic liquids.

Project description:Ionic liquids (ILs) incorporating cyclic phosphonium cations are a novel category of materials. We report here on the synthesis and characterization of four new cyclic phosphonium bis(trifluoromethylsulfonyl)amide ILs with aliphatic and aromatic pendant groups. In addition to the syntheses of these novel materials, we report on a comparison of their properties with their ammonium congeners. These exemplars are slightly less conductive and have slightly smaller self-diffusion coefficients than their cyclic ammonium congeners.

| S-EPMC3944138 | biostudies-literature

Basic Phosphonium Ionic Liquids as Wittig Reagents.

Project description:The possibility of designing a solvent/reagent for Wittig reactions from basic phosphonium salts is explored theoretically. In the suggested R4P+PhO- and Ph3PR+PhO- ionic liquids (ILs), the phenolate anion is prone to remove the α-proton from the alkyl chains, forming a phosphorous ylide. Significant hydrogen bonding between the oxygen atoms of the anions and α-hydrogen atoms of the cations were found by molecular dynamics simulations of these substances; therefore, proton transfer between the two ions is inherently supported by the structure of the liquid as well. The subsequent steps of the Wittig reaction from the phosphorous ylide were also found to be energetically possible. The mesoscopic structure of these materials exhibits a significant segregation into polar and nonpolar domains, which may also allow an easy dissolution of the substrates. The formation of a pentacoordinated phosphorous derivative through P-O bond formation was found to be also possible in the gas phase for both kind of compounds. Accordingly, having such basic anions in phosphonium-based ILs may produce such a neutral and therefore volatile species, which may hold further significant applications for these solvents in ion-exchange and separation techniques and in synthesis.

| S-EPMC6641186 | biostudies-literature

Effect of Aromaticity in Anion on the Cation-Anion Interactions and Ionic Mobility in Fluorine-Free Ionic Liquids.

Project description:Ionic liquids (ILs) composed of tetra(n-butyl)phosphonium [P4444]+ and tetra(n-butyl)ammonium [N4444]+ cations paired with 2-furoate [FuA]-, tetrahydo-2-furoate [HFuA]-, and thiophene-2-carboxylate [TpA]- anions are prepared to investigate the effects of electron delocalization in anion and the mutual interactions between cations and anions on their physical and electrochemical properties. The [P4444]+ cations-based ILs are found to be liquids, while the [N4444]+ cations-based ILs are semi-solids at room temperature. Thermogravimetric analysis revealed higher decomposition temperatures and differential scanning calorimetry analysis showed lower glass transition temperatures for phosphonium-based ILs than the ammonium-based counterparts. The ILs are arranged in the decreasing order of their ionic conductivities as [P4444][HFuA] (0.069 mS cm-1) > [P4444][FuA] (0.032 mS cm-1) > [P4444][TpA] (0.028 mS cm-1) at 20 °C. The oxidative limit of the ILs followed the sequence of [FuA]-> [TpA]-> [HFuA]-, as measured by linear sweep voltammetry. This order can be attributed to the electrons' delocalization in [FuA]- and in [TpA]- aromatic anions, which has enhanced the oxidative limit potentials and the overall electrochemical stabilities.

| S-EPMC7872428 | biostudies-literature

Coexistence of Tellurium Cations and Anions in Phosphonium-Based Ionic Liquids.

Project description:Elemental tellurium readily dissolves in ionic liquids (ILs) based on tetraalkylphosphonium cations even at temperatures below 100 °C. In the case of ILs with acetate, decanoate, or dicyanamide anions, dark red to purple colored solutions form. A study combining NMR, UV-Vis and Raman spectroscopy revealed the formation of tellurium anions (Ten )2- with chain lengths up to at least n=5, which are in dynamic equilibrium with each other. Since external influences could be excluded and no evidence of an ionic liquid reaction was found, disproportionation of the tellurium is the only possible dissolution mechanism. Although the spectroscopic detection of tellurium cations in these solutions is difficult, the coexistence of tellurium cations, such as (Te4 )2+ and (Te6 )4+ , and tellurium anions could be proven by cyclic voltammetry and electrodeposition experiments. DFT calculations indicate that electrostatic interactions with the ions of the ILs are sufficient to stabilize both types of tellurium ions in solution.

| S-EPMC9304316 | biostudies-literature

Amide-functionalised phosphonium-based ionic liquids as ligands for rhodium(iii) extraction.

Project description:Seven new amide-functionalised phosphonium-based ionic liquids (APILs) with chloride anions are synthesised and applied to extraction of rhodium(iii) from HCl solution. The effects of structural modification of the APILs on the extraction performance are examined by liquid-liquid extraction using toluene as a diluent and the results compared with those for trihexyltetradecylphosphonium chloride ([P66614][Cl]), a typical commercial extractant. The performance of the APILs as rhodium(iii) extractants is influenced by three main factors: (1) the length of the alkyl chains attached to the P atom; (2) the length of the linker between the amide and phosphonium moiety; and (3) the type of amide group. A novel ligand, [3°C2P444][Cl], had outstanding performance in the effective recovery of rhodium(iii). Extraction of rhodium(iii) from a 1.0 mol dm-3 HCl solution with 0.5 mol dm-3 [3°C2P444][Cl] proceeded quantitatively (>98%) and the extraction efficiency was higher than that of the commercial extractant [P66614][Cl]. The mechanism of rhodium(iii) extraction by [3°C2P444][Cl] was investigated by slope analysis, UV-vis, and FT-IR spectroscopy. These results indicate that [RhCl4(H2O)2]- in aqueous solution is extracted by [3°C2P444][Cl] through an anion-exchange mechanism and slowly converted into a dimer, [Rh2Cl9]3-, in the organic phase.

| S-EPMC8695338 | biostudies-literature

Cobalt Extraction from Sulfate/Chloride Media with Trioctyl(alkyl)phosphonium Chloride Ionic Liquids.

Project description:The application of phosphonium-based ionic liquids (ILs) on the selective extraction of cobalt is presented. The extraction mechanism is established, and different parameters of the process are evaluated. It has been found that it is possible to extract cobalt from aqueous solutions in sulfate media, with the addition of sodium chloride, using phosphonium ILs. The cobalt extraction was selective with respect to nickel and strongly dependent on the chloride concentration in the aqueous solution. The cobalt extraction is given by an anion exchange mechanism through an endothermic process. Cobalt extractions greater than 98% were obtained using the proposed methods. Cobalt stripping from the loaded IL phase using water was proved. Therefore, an alternative extraction process to traditional organic solvents is proposed. This alternative has additional advantages such as easy handling, lower costs in reagents and equipment, and risk reduction.

| S-EPMC7097900 | biostudies-literature

Relative Cation-Anion Diffusion in Alkyltriethylammonium-Based Ionic Liquids.

Project description:19F Nuclear Magnetic Resonance spin-lattice relaxation experiments have been performed for a series of ionic liquids including the same anion, bis(trifluoromethanesulfonyl)imide, and cations with alkyl chains of different lengths: triethylhexylammonium, triethyloctylammonium, decyltriethylammonium, dodecyltriethylammonium, decyltriethylammonium, and hexadecyltriethylammonium. The experiments have been carried out in a frequency range of 10 kHz to 10 MHz versus temperature. A thorough analysis of the relaxation data has led to the determination of the cation-anion as a relative translation diffusion coefficient. The diffusion coefficients have been compared with the corresponding cation-cation and anion-anion diffusion coefficients, revealing a correlation in the relative translation movement of the anion and the triethylhexylammonium, triethyloctylammonium, decyltriethylammonium, and dodecyltriethylammonium cations, whereas the relative translation diffusion between the anion and the cations with the longer alkyl chains, decyltriethylammonium and hexadecyltriethylammonium, remains rather uncorrelated (correlated to a much lesser extent).

| S-EPMC9181216 | biostudies-literature

Solubility and Stability of Carotenoids in Ammonium- and Phosphonium-Based Ionic Liquids: Effect of Solvent Nature, Temperature and Water.

Project description:Ionic liquids (ILs) have arisen as alternatives to organic solvents and been used in natural pigment extraction in recent decades. However, the solubility and stability of carotenoids in phosphonium- and ammonium-based ILs are insufficiently explored. In this work, the physicochemical properties of the ILs, and the dissolution behavior and storage stability of three carotenoids (astaxanthin, β-carotene, and lutein) in the IL aqueous solution were investigated. The results showed that the solubility of the carotenoids in the acidic IL solution is higher than that in the alkaline IL solution, and the optimal pH is about 6. The solubility of astaxanthin (40 mg/100 g), β-carotene (105 mg/100 g), and lutein (5250 mg/100 g) was the highest in tributyloctylphosphonium chloride ([P4448]Cl) due to the van der Waals forces with [P4448]+ and hydrogen bonding with Cl-. A high temperature was beneficial to improve the solubility, but it can reduce the storage stability. Water has no significant effect on the carotenoid stability, but a high water content decreases the carotenoid solubility. A IL water content of 10-20%, an extraction temperature of 338.15 K, and a storage temperature of less than 298.15 K are beneficial for reducing the IL viscosity, improving carotenoid solubility, and maintaining good stability. Moreover, a linear correlation was found between the color parameters and carotenoid contents. This study provides some guidance for screening suitable solvents for carotenoid extraction and storage.

| S-EPMC10143741 | biostudies-literature

Mutual solubilities between water and non-aromatic sulfonium-, ammonium- and phosphonium-hydrophobic ionic liquids.

Project description:Although previous studies attempted to characterize the liquid-liquid phase behaviour between water and ionic liquids (ILs), the impact of non-cyclic cations on the solubilities is poorly studied and yet to be understood. In this work, the mutual solubilities between water and ILs containing the anion bis(trifluoromethylsulfonyl)imide, [NTf2](-), combined with the cations diethylmethylsulfonium, [S221][NTf2], triethylsulfonium, [S222][NTf2], butyltrimethylammonium, [N4111][NTf2], tributylmethylammonium, [N4441][NTf2], methyltrioctylammonium, [N1888][NTf2], and methyltrioctylphosphonium, [P1888][NTf2], from (288.15 to 318.15) K and at 0.1 MPa, were experimentally measured and further compared with predictions from the COnductor-like Screening MOdel for Real Solvents (COSMO-RS). All the studied phase diagrams display an upper critical solution temperature (UCST). The binary system composed of [P1888][NTf2] exhibits the widest immiscibility gap, followed by [N18888][NTf2], [N4441][NTf2], [S222][NTf2], [N4111][NTf2], and [S221][NTf2]. The COSMO-RS is able to correctly predict the experimental UCST behaviour and the cation impact on the immiscibility regimes observed. Natural Population Analysis (NPA) calculations were additionally performed for the isolated cations in the gas phase indicating that the differences in the water-IL mutual miscibilities might not result only from the hydrophobicity of the cation (derived from the increase of the alkyl chains length) but also from the charge distribution of the central atom and attached methylene groups. This fact explains the enhanced solubility of ammonium-based ILs in water here identified.

| S-EPMC4579553 | biostudies-literature

Synthesis and Physicochemical Properties of Acrylate Anion Based Ionic Liquids.

Project description:Two polymerizable ionic liquids (or monomeric ionic liquids, mILs) namely 1-butyl-3-methylimidazolium and choline acrylates ([C4mim]A and ChA, respectively) were synthesized using the modified Fukumoto method from corresponding chlorides. The chemical structure of the prepared mILs was confirmed with FTIR and NMR study. Investigation of the thermal properties with DSC demonstrates that both mILs have a Tg temperature of about 180 K and a melting point around 310 K. It was shown that the temperature dependence of FTIR confirm the Tg to be below 200. Both mILs exhibited non-Newtonian shear thinning rheological behavior at shear rates >4 s-1. It was shown that [C4mim]A is able to dissolve bacterial cellulose (BC) leading to a decrease in its degree of polymerization and recrystallisation upon regeneration with water; although in the ChA, the crystalline structure and nanofibrous morphology of BC was preserved. It was demonstrated that the thixotropic and rheological properties of cellulose dispersion in ChA at room temperature makes this system a prospective ink for 3D printing with subsequent UV-curing. The 3D printed filaments based on ChA, containing 2 wt% of BC, and 1% of N,N'-methylenebisacrylamide after radical polymerization induced with 1% 2-hydroxy-2-methylpropiophenone, demonstrated Young's modulus 7.1 ± 1.0 MPa with 1.2 ± 0.1 MPa and 40 ± 5% of strength and ultimate elongation, respectively.

| S-EPMC9736722 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data