Genetic Algorithm-Based Optimization of Curved-Tube Nozzle Parameters for Rotating Spinning.
Ontology highlight
ABSTRACT:
SUBMITTER: Li W
PROVIDER: S-EPMC8678564 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Centrifugal fiber spinning has recently emerged as a highly promising alternative technique for the production of nonwoven, ultrafine fiber mats. Due to its high production rate, it could provide a more technologically relevant fiber spinning technique than electrospinning. In this contribution, we examine the influence of polymer concentration and nozzle material on the centrifugal spinning process and the fiber morphology. We find that increasing the polymer concentration transforms the process from a beaded-fiber regime to a continuous-fiber regime. Furthermore, we find that not only fiber diameter is strongly concentration-dependent, but also the nozzle material plays a significant role, especially in the continuous-fiber regime. This was evaluated by the use of a polytetrafluoroethylene (PTFE) and an aluminum nozzle. We discuss the influence of polymer concentration on fiber morphology and show that the choice of nozzle material has a significant influence on the fiber diameter.
| S-EPMC7182933 | biostudies-literature
Project description:A new software tool making use of a genetic algorithm for multi-objective experimental optimization (GAME.opt) was developed based on a strength Pareto evolutionary algorithm. The software deals with high dimensional variable spaces and unknown interactions of design variables. This approach was evaluated by means of multi-objective test problems replacing the experimental results. A default parameter setting is proposed enabling users without expert knowledge to minimize the experimental effort (small population sizes and few generations).
| S-EPMC1705497 | biostudies-other
Project description:Genetic algorithm is widely used in multi-objective mechanical structure optimization. In this paper, a genetic algorithm-based optimization method for ladle refractory lining structure is proposed. First, the parametric finite element model of the new ladle refractory lining is established by using ANSYS Workbench software. The refractory lining is mainly composed of insulating layer, permanent layer and working layer. Secondly, a mathematical model for multi-objective optimization is established to reveal the functional relationship between the maximum equivalent force on the ladle lining, the maximum temperature on the ladle shell, the total mass of the ladle and the structural parameters of the ladle refractory lining. Genetic algorithm translates the optimization process of ladle refractory lining into natural evolution and selection. The optimization results show that, compared with the unoptimized ladle refractory lining structure (insulation layer thickness of 0 mm, permanent layer thickness of 81 mm, and working layer thickness of 152 mm), the refractory lining with insulation layer thickness of 8.02 mm, permanent layer thickness of 76.20 mm, and working layer thickness of 148.61 mm has the best thermal insulation performance and longer service life within the variation of ladle refractory lining structure parameters. Finally, the results of the optimization are verified and analyzed in this paper. The study found that by optimizing the design of the ladle refractory lining, the maximum equivalent force on the ladle lining, the maximum temperature on the ladle shell and the ladle mass were reduced. The thermal insulation performance and the lightweight performance of the ladle are improved, which is very important for improving the service life of the ladle.
| S-EPMC9240744 | biostudies-literature
Project description:Indoor location information is an indispensable parameter for modern intelligent warehouse management and robot navigation. Indoor wireless positioning exhibits large errors due to factors such as indoor non-line-of-sight (NLOS) obstructions. In the present study, the error value under the time of arrival (TOA) algorithm was evaluated, and the trilateral positioning method was optimized to minimize the errors. An optimization algorithm for indoor ultra-wideband (UWB) positioning was designed, which was referred as annealing evolution and clustering fusion optimization algorithm. The algorithm exploited the good local search capability of the simulated annealing algorithm and the good global search capability of the genetic algorithm to optimize cluster analysis. The optimal result from sampled data was quickly determined to achieve effective and accurate positioning. These features reduced the non-direct aiming error in the indoor UWB environment. The final experimental results showed that the optimized algorithm significantly reduced noise interference as well as improved positioning accuracy in an NLOS indoor environment with less than 10 cm positioning error.
| S-EPMC9360920 | biostudies-literature
Project description:We examine coherent evolution of spin-locked magnetization during magic-angle spinning (MAS), in the context of relaxation experiments designed to probe chemical exchange (rotating-frame relaxation (R1ρ)). Coherent evolution is expected in MAS based rotating-frame relaxation decay experiments if matching conditions are met (such as, ω1 = nωr) and if the chemical shielding anisotropy (CSA) is substantial. We show here using numerical simulations and experiments that even when such matching requirements are avoided (e.g., ω1 < 0.5ωr, ∼1.5ωr, >2.5ωr), coherent evolution of spin-locked magnetization with large CSA is still considerable. The coherent evolution has important consequences on the analysis of relaxation decay and the ability to extract accurate information of interest about dynamics. We present a pulse sequence that employs rotary echoes and refocuses CSA contributions, allowing for more sensitive measurement of rotating-frame relaxation with less interference from coherent evolution. In practice, the proposed pulse sequence, REfocused CSA Rotating-frame Relaxation (RECRR) is robust to carrier frequency offset, B1-field inhomogeneity, and slight miscalibrations of the refocusing pulses.
| S-EPMC6512962 | biostudies-literature
Project description:The development of Friction Stir Welding (FSW) has provided an alternative approach for producing high-quality welds, in a fast and reliable manner. This study focuses on the mechanical properties of the dissimilar friction stir welding of AA6061-T6 and AA7075-T6 aluminum alloys. The FSW process parameters such as tool rotational speed, tool traverse speed, tilt angle, and tool offset influence the mechanical properties of the friction stir welded joints significantly. A mathematical regression model is developed to determine the empirical relationship between the FSW process parameters and mechanical properties, and the results are validated. In order to obtain the optimal values of process parameters that simultaneously optimize the ultimate tensile strength, elongation, and minimum hardness in the heat affected zone (HAZ), a metaheuristic, multi objective algorithm based on biogeography based optimization is proposed. The Pareto optimal frontiers for triple and dual objective functions are obtained and the best optimal solution is selected through using two different decision making techniques, technique for order of preference by similarity to ideal solution (TOPSIS) and Shannon's entropy.
| S-EPMC5459031 | biostudies-other
Project description:To date, several independent methods and algorithms exist for exploiting constraint-based stoichiometric models to find metabolic engineering strategies that optimize microbial production performance. Optimization procedures based on metaheuristics facilitate a straightforward adaption and expansion of engineering objectives, as well as fitness functions, while being particularly suited for solving problems of high complexity. With the increasing interest in multi-scale models and a need for solving advanced engineering problems, we strive to advance genetic algorithms, which stand out due to their intuitive optimization principles and the proven usefulness in this field of research. A drawback of genetic algorithms is that premature convergence to sub-optimal solutions easily occurs if the optimization parameters are not adapted to the specific problem. Here, we conducted comprehensive parameter sensitivity analyses to study their impact on finding optimal strain designs. We further demonstrate the capability of genetic algorithms to simultaneously handle (i) multiple, non-linear engineering objectives; (ii) the identification of gene target-sets according to logical gene-protein-reaction associations; (iii) minimization of the number of network perturbations; and (iv) the insertion of non-native reactions, while employing genome-scale metabolic models. This framework adds a level of sophistication in terms of strain design robustness, which is exemplarily tested on succinate overproduction in Escherichia coli.
| S-EPMC6027426 | biostudies-literature
Project description:Particle swarm optimization and genetic algorithms are two classes of popular heuristic algorithms that are frequently used for solving complex multi-dimensional mathematical optimization problems, each one with its one advantages and shortcomings. Particle swarm optimization is known to favor exploitation over exploration, and as a result it often converges rapidly to local optima other than the global optimum. The genetic algorithm has the ability to overcome local extrema throughout the optimization process, but it often suffers from slow convergence rates. This paper proposes a new hybrid algorithm that nests particle swarm optimization operations in the genetic algorithm, providing the general population with the exploitation prowess of the genetic algorithm and a sub-population with the high exploitation capabilities of particle swarm optimization. The effectiveness of the proposed algorithm is demonstrated through solutions of several continuous optimization problems, as well as discrete (traveling salesman) problems. It is found that the new hybrid algorithm provides a better balance between exploration and exploitation compared to both parent algorithms, as well as existing hybrid algorithms, achieving consistently accurate results with relatively small computational cost.
| S-EPMC9506650 | biostudies-literature
Project description:This study demonstrates the fabrication of κ-carrageenan fibers by a wet-spinning method and discusses three important spinning parameters: coagulation bath composition, spinning rate and post-spinning mechanical drawing. The as-spun fiber diameter decreased with KCl and ethanol concentration in the coagulation bath. In general, the ultimate tensile stress and elongation at break both increased for KCl concentration from 0.1 to 0.5 M with and without ethanol, with no significant change above 0.5 M. Spinning rate affected the dope flow and thus the polymer orientation (apparent viscosity) and fiber morphology. At spinning rates between 0.25 mL/min and 0.33 mL/min, the fiber diameter reached a minimum and the fiber surface was smooth. Both an increase and decrease from this spinning rate range increased the fiber diameter and roughness of the fiber surface. Post-spinning drawing of the fiber resulted in even smaller fiber diameter.
| S-EPMC5448880 | biostudies-other
Project description:The rectangular packing problem is an NP-complete combinatorial optimization problem. This problem occurs widely in social production scenarios, with steel plate cutting being one example. The cutting scheme for the rectangular packing problem needs to be improved because, without the globally optimal solution, there are many unnecessary edges in the steel cutting process. Based on a practical roll-fed disc shearing steel plate optimization problem, this paper explores a generalized packing method for rectangles of special dimensions and abstractly condenses complex quantitative relationships to establish a multi-objective mixed-integer nonlinear programming model. An innovative algorithm design based on a genetic algorithm is established to plan the cutting scheme in a high-speed and efficient way. The outcome is a utilization rate of up to 92.73% for raw materials and a significant reduction in labor, providing a guide for practical production and processing tasks. The advantages and disadvantages of the model and algorithm are discussed, and it is concluded that this rectangular packing method has strong universality and generalization ability, allowing rectangular packing tasks with large data volumes to be completed within a short time.
| S-EPMC9797486 | biostudies-literature