Dataset Information

Novel environment friendly TLC-densitometric method for the determination of anti-coronavirus drugs "Remdesivir and Favipiravir": Green assessment with application to pharmaceutical formulations and human plasma.

ABSTRACT: A great demand for discovering new therapeutic solutions has been considered all over the world for managing the rapidly progressing COVID-19 pandemic. Remdesivir (REM) and Favipiravir (FAV) are introduced as promising newly developed antiviral agents against the corona virus as evidenced by the clinical findings. Hence, the optimization of an analytical method for their simultaneous determination acquires potential importance in quality control labs and further confirmatory investigations. Herein, a green, sensitive, and selective densitometric method has been proposed and validated for determination of REM and FAV in pharmaceutical formulations and spiked human plasma on normal phase TLC plates. A solvent mixture of ethyl acetate-methanol-ammonia (8:2:0.2 by volume) has been chosen as developing mobile phase system. Well resolved spots have been detected at 235 nm with retardation factors (R_f) of 0.18 and 0.98 for REM and FAV, respectively. A validation study has been carried out in the light of ICH guidelines. Remdesivir and FAV have shown excellent sensitivities with quantitation limits down to 0.12 and 0.07 μg/band, respectively. The developed method has been successfully applied to tablet formulations and spiked plasma with excellent recoveries ranged from 97.21 to 101.31%. The greenness of the method has been evaluated using the standards of greenness profile and Eco-Scale. It has passed the four greenness profile quadrants and achieved 80 score in Eco-Scale.

SUBMITTER: Noureldeen DAM

PROVIDER: S-EPMC8683213 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Determination of valproic acid in the drug was carried out on the aluminum silica gel 60F254 plates and using acetone-water-chloroform-ethanol-ammonia at a volume ratio of 30:1:8:5:11 as the mobile phase, respectively. Two methods of detection of valproic acid were used. The first was a 2% aqueous CuSO4×5H2O solution, and the second was a 2',7'-dichlorofluorescein-aluminum chloride-iron (III) chloride system. The applied TLC-densitometric method is selective, linear, accurate, precise, and robust, regardless of the visualizing reagent used for the determination of valproic acid in Convulex capsules. It has low limits of detection (LOD) and limits of quantification (LOQ), which are equal to 5.8 μg/spot and 17.4 μg/spot using a 2% aqueous CuSO4×5H2O solution as visualizing agent and also 0.32 μg/spot and 0.97 μg/spot using a 2',7'-dichlorofluorescein-aluminum chloride-iron (III) chloride system as visualizing reagent, respectively. The described analytical method can additionally be used to study the identity of valproic acid in a pharmaceutical preparation. The linearity range was found to be 20.00-80.00 μg/spot and 1.00-2.00 μg/spot for valproic acid detected on chromatographic plates using a 2% aqueous CuSO4×5H2O solution and the 2',7'-dichlorofluorescein-aluminum chloride-iron (III) chloride system, respectively. A coefficient of variation that was less than 3% confirms the satisfactory accuracy and precision of the proposed method. The results of the assay of valproic acid equal 96.2% and 97.0% in relation to the label claim that valproic acid fulfill pharmacopoeial requirements. The developed TLC-densitometric method can be suitable for the routine analysis of valproic acid in pharmaceutical formulations. The proposed TLC-densitometry may be an alternative method to the modern high-performance liquid chromatography and square wave voltammetry in the control of above-mentioned substances, and it can be applied when other analytical techniques is not affordable in the laboratory.

Project description:Preserving the environment, reducing the amount of waste resulting from chemical trials, and reducing the amount of energy consumed have currently become a pivotal global trend. An analytical quality by design (AQbD) based eco-friendly TLC-densitometric method was implemented for quantifying two antihypertensive agents, captopril (CPL) and hydrochlorothiazide (HCZ), along with their impurities; captopril disulphide (CDS), chlorothiazide (CTZ) and salamide (SMD). The analytical target profile (ATP) was first identified, followed by selecting the critical analytical attributes (CAAs), such as retardation factors and resolution between the separated peaks. Critical method parameters (CMPs) that may have a crucial influence on CAAs were identified and emanated through the quality risk assessment phase. A literature survey-based preliminary studies were performed, followed by optimization of the selected CMPs through a custom experimental design to attain the highest resolution with optimum retardation factors. Moreover, method robustness was also tested by testing the design space. Complete separation of the drugs and their impurities was achieved using ethyl acetate: glacial acetic acid (6: 0.6, v/v) as a developing system applied to a 12 cm length TLC plate at room temperature with UV scanning at 215 nm. Calibration graphs were found to be linear in the ranges of (0.70-6.00), (0.10-2.00), (0.20-1.00), (0.07-1.50) and (0.05-1.00) µg/band corresponding to CPL, HCZ, CDS, CTZ, and SMD, respectively. Four different green metric tools were used to evaluate the greenness profile of the proposed method, and results showed that it is greener than the reported HPLC method. Method whiteness assessment was also conducted. Moreover, the method performance was evaluated following the ICH guidelines, and the outcomes fell within the acceptable limits. The developed method could be approved for routine assay of the cited components in their pharmaceutical formulations and bulk powder without interference from the reported impurities. The issue of concern is saving money, especially in developing countries.

Dataset Information

Novel environment friendly TLC-densitometric method for the determination of anti-coronavirus drugs "Remdesivir and Favipiravir": Green assessment with application to pharmaceutical formulations and human plasma.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets