Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Green detection of trace cyanuric acid and free chlorine together via ion chromatography.

ABSTRACT: Chlorinated cyanurates (CCAs) are a type of disinfectants currently used worldwide for fight of Coronavirus. However, CCAs upon dosed into water can release not only free chlorine (FC), a strong disinfectant, but also cyanurate (CYA), a persistent compound potentially harmful to human and environment. Therefore, detecting CYA and FC in water are very important not only for ensuring sufficient disinfection but also for monitoring the impacts of FC and CYA on receiving watershed. However, conventional analytical methods for them are mostly based on colorimetric methods, which have high method detection limits (MDLs) and rely on chemical reactions that are likely sensitive to coexisting chemicals. To overcome these issues, we herein proposed a facile and reaction-free method to detect CYA and FC together in just one run by ion chromatography (IC) equipped with both conductivity and ultraviolet absorbance detectors. The method features obvious advantages over colorimetric methods in being lower MDLs (3.6 μg/L for CYA and 9.0 μg/L for FC), environmental-friendly (i.e., no organic solvent involved), and more resistant to alkaline solution. With this method, trace levels of CYA (i.e., 34-44 μg/L), which were nondetectable by conventional method, were found in two river water samples, implying that the local environment was already polluted by CCAs during the pandemic period. Overall, this study demonstrates a robust tool that may assist better understanding and monitoring the fate and transport of trace CCA derivatives in water.

SUBMITTER: Wei Y

PROVIDER: S-EPMC8691421 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Determination of free chlorine based on ion chromatography-application of glycine as a selective scavenger.

Project description:Free available chlorine (FAC) is the most widely used chemical for disinfection and in secondary disinfection; a minimum chlorine residual must be present in the distribution system. FAC can also be formed as an impurity in ClO2 production as well as a secondary oxidant in the ClO2 application, which has to be monitored. In this study, a new method is developed based on the reaction of FAC with glycine in which the amine group selectively scavenges FAC and the N-chloroglycine formed can be measured by ion chromatography with conductivity detector (IC-CD). Utilizing IC for N-chloroglycine measurement allows this method to be incorporated into routine monitoring of drinking water anions. For improving the sensitivity, IC was coupled with post-column reaction and UV detection (IC-PCR-UV), which was based on iodide oxidation by N-chloroglycine resulting in triiodide. The method performance was quantified by comparison of the results with the N,N-diethyl-p-phenylenediamine (DPD) method due to the unavailability of an N-chloroglycine standard. The N-chloroglycine method showed limits of quantification (LOQ) of 24 ?g L-1 Cl2 and 13 ?g L-1 Cl2 for IC-CD and IC-PCR-UV, respectively. These values were lower than those of DPD achieved in this research and in ultrapure water. Measurement of FAC in the drinking water matrix showed comparable robustness and sensitivity with statistically equivalent concentration that translated to recoveries of 102% for IC-CD and 105% for IC-PCR-UV. Repeatability and reproducibility performance were enhanced in the order of DPD, IC-CD, and IC-PCR-UV. Measurement of intrinsic FAC in the ClO2 application revealed that the N-chloroglycine method performed considerably better in such a system where different oxidant species (ClO2, FAC, chlorite, etc.) were present.

| S-EPMC7550385 | biostudies-literature

A Drinking Water Relevant Water Chemistry Model for the Free Chlorine and Cyanuric Acid System from 5 to 35 °C.

Project description:In the United States, approved methods to measure free chlorine concentrations in drinking water systems adding sodium dichloroisocyanurate (dichlor) or trichloroisocyanuric acid (trichlor) as chlorine sources exhibit measurement bias from chlorinated cyanurate presence, leading to overestimated free chlorine concentrations for regulatory compliance. One option to overcome this limitation is to estimate free chlorine concentrations using an established water chemistry model (full model), but the full model has only been determined for 25 °C. The current research used a simplified version of the full model (simple model) and estimated the unknown temperature dependence (5 to 35 °C) of the two remaining equilibrium constants (K7a and K9a) required for the simple model. At 0 M ionic strength (μ), lnK7a=−4,671TK+4.95 or pK7a=2,028TK−2.15, ΔH7a0=38.8±6.0 kJ mol−1 (95% confidence interval, CI), lnK9a=−5,133TK+3.79 or pK9a=2,229TK−1.65, and ΔH9a0=42.7±3.0 kJ mol−1 (95% CI). At 25 °C and μ of 0 M, the simple model estimated pK7a and pK9a are 4.65 ± 0.059 (95% CI) and 5.83 ± 0.020 (95% CI), respectively. As an example of temperature’s impact, the free chlorine concentration for a 2 mg Cl2 L−1 dichlor addition (pH 7.0) decreases from 0.90 mg Cl2 L−1 free chlorine at 25 °C to 0.60 mg Cl2 L−1 free chlorine at 5 °C. If temperature was not considered, a system operating at 5 °C would overestimate their free chlorine concentration by 50%, which could have significant implications for understanding disinfection efficacy, illustrating the developed model’s significance.

| S-EPMC6446240 | biostudies-literature

A procedure for removal of cyanuric acid in swimming pools using a cell-free thermostable cyanuric acid hydrolase.

Project description:Cyanuric acid (CYA) is used commercially for maintaining active chlorine to inactivate microbial and viral pathogens in swimming pools and hot tubs. Repeated CYA addition can cause a lack of available chlorine and adequate disinfection. Acceptable CYA levels can potentially be restored via cyanuric acid hydrolases (CAH), enzymes that hydrolyze CYA to biuret under mild conditions. Here we describe a previously unknown CAH enzyme from Pseudolabrys sp. Root1462 (CAH-PR), mined from public databases by bioinformatic analysis of potential CAH genes, which we show to be suitable in a cell-free form for industrial applications based upon favorable enzymatic and physical properties, combined with high-yield expression in aerobic cell culture. The kinetic parameters and modeled structure were similar to known CAH enzymes, but the new enzyme displayed a surprising thermal and storage stability. The new CAH enzyme was applied, following addition of inexpensive sodium sulfite, to hydrolyze CYA to biuret. At the desired endpoint, hypochlorite addition inactivated remaining enzyme and oxidized biuret to primarily dinitrogen and carbon dioxide gases. The mechanism of biuret oxidation with hypochlorite under conditions relevant to recreational pools is described.

| S-EPMC9118981 | biostudies-literature

Trace level detection of melamine and cyanuric acid extracted from pet liquid food (milk) using a SERS Au nanogap substrate.

Project description:This study reported an application of Au nanogap substrates for surface-enhanced Raman scattering (SERS) measurements to quantitatively analyze melamine and its derivative products at trace levels in pet liquid food (milk) combined with a waveband selection approach, namely variable importance in projection (VIP). Six different concentrations of melamine, cyanuric acid, and melamine combined with cyanuric acid were created, and SERS spectra were acquired from 550 to 1620cm-1. Detection was possible up to 200 pM for melamine-contaminated samples, and 400 pM concentration detection for other two groups. The VIP-PLSR models obtained correlation coefficient (R2) values of 0.997, 0.985, and 0.981, with root mean square error of prediction (RMSEP) values of 18.492 pM, 19.777 pM, and 15.124 pM for prediction datasets. Additionally, partial least square discriminant analysis (PLS-DA) was used to classify both pure and different concentrations of spiked samples. The results showed that the maximum classification accuracy for melamine was 100%, for cyanuric acid it was 96%, and for melamine coupled with cyanuric acid it was 95%. The results obtained clearly demonstrated that the Au nanogap substrate offers low-concentration, rapid, and efficient detection of hazardous additive chemicals in pet consuming liquid food.

| S-EPMC10999514 | biostudies-literature

Development of a bacterial bioassay for atrazine and cyanuric acid detection.

Project description:The s-triazine herbicides are compounds which can disseminate into soils and water. Due to their toxic effects on living organisms, their concentrations in drinking water are legislated by WHO recommendations. Here we have developed for the first time, to the best of our knowledge, an alternative method for physicochemical quantification using two bioluminescent bacterial biosensors: E. coli SM003 for cyanuric acid detection and E. coli SM004 for both atrazine and cyanuric acid detection. The concentration of cyanuric acid detection for E. coli SM003 ranges from 7.83 μM to 2.89 mM, and for E. coli SM004 ranges from 0.22 to 15 μM. Moreover, atrazine detection by E. coli SM004 ranges from 1.08 to 15 μM. According to WHO recommendations, the cyanuric acid detection range is sensitive enough to discriminate between polluted and drinking water. Nevertheless, the detection of atrazine by E. coli SM004 is only applicable for high concentrations of contaminants.

| S-EPMC4362333 | biostudies-literature

A gas-free electrodialytic pH modifier for ion chromatography.

Project description:We for the first time describe a gas-free electrodialytic pH modifier deployed at the pump outlet side to manipulate carbonate eluent used for ion chromatography (IC). It is in sandwich configured, in which the central eluent channel is spatially isolated from two outer regenerant chambers by a stacked cation exchange membranes (sCEM) and a bipolar membrane (BPM) plus a stacked anion exchange membranes (sAEM) (BPM-sAEM), the cation exchange side of BPM is facing the central channel (the cathode direction). One electrode is put in each regenerant chamber and the sCEM side is cathode with respect to the anode of BPM-sAEM side. When a potassium carbonate eluent is pumped into the central channel and a DC current is applied, a controlled amount of potassium ions will be removed by migrating across sCEM into cathodic chamber. Meanwhile, hydronium ions generated from enhanced water splitting at the intermediate layer of BPM will electromigrate into central channel to form bicarbonate. By controlling the current, the potassium carbonate eluent can be manipulated to obtain a mixed eluent with different ratio of carbonate and bicarbonate. At least 10 mM K2CO3 eluent can be online changed modified into 10 mM KHCO3 with near-ideal Faradaic efficiency (∼92%). The device demonstrated good reproducibility, as indicated by retention time of relative standard deviation (RSD) < 0.43% and the peak area of RSD <0.93%.

| S-EPMC7881222 | biostudies-literature

Urinary biomarker detection of melamine- and cyanuric acid-induced kidney injury in rats.

Project description:Oral coexposure of rats to melamine (MEL) and cyanuric acid (CYA) results in a dose-dependent increase in the formation of MEL-CYA crystals in the kidney. The aim of this study was to determine if urinary biomarkers of acute kidney injury could be used to noninvasively detect renal damage associated with crystal formation in the kidneys of MEL- and CYA-exposed rats. Urine was obtained on days 0 (predose), 2, 4, 14, and 28 from male and female Fischer 344 rats fed a diet supplemented with 0, 120, 180, or 240 ppm each of MEL and CYA. A number of urinary protein biomarkers (kidney injury molecule-1, neutrophil gelatinase-associated lipocalin, osteopontin, albumin, alpha-GST, GST-Yb1, renal papillary antigen 1 [RPA-1], and clusterin) were measured using a multiplex assay system. The results showed that RPA-1 (distal tubule and collecting duct injury biomarker) was elevated on day 28 at the 120 ppm dose and higher in male rats and at the 180 ppm dose and higher in female rats; however, other urinary protein biomarkers were significantly elevated only at the 240 ppm dose. Significant elevation in blood urea nitrogen and serum creatinine levels, and severe renal damage evidenced by histopathology, were observed after 28 days of exposure to the highest dose, despite the fact that MEL-CYA crystals were observable at the 120 and 180 ppm doses. These data indicate that RPA-1 may serve as a noninvasive urinary biomarker for the detection and monitoring of obstructive nephropathy associated with MEL-CYA exposure.

| S-EPMC3499075 | biostudies-literature

Environmentally safe (chlorine-free): new green propellant formulation based on 2,2,2-trinitroethyl-formate and HTPB.

Project description:A new green (chlorine-free) high energy dense oxidizer (HEDO) 2,2,2-trinitroethyl-formate (TNEF) and its propellant formulation based on the hydroxyl-terminated polybutadiene (HTPB) as a binder was prepared and studied. The new oxidizer TNEF was successfully prepared and characterized by nuclear magnetic resonance (NMR) and FTIR spectrometer. Scanning electron microscopy (SEM) was used to check the crystal morphology of the oxidizer. A high specific impulse (I s = 250.1 s) was obtained from the characteristics calculation of the new oxidizer instead of (I s = 156.9 s) for the commonly used ammonium perchlorate (AP) by using EXPLO5_V6.03 software. The burning behavior and the burning rate were determined by using a high speed camera. TNEF and the propellant formulations were studied by using nonisothermal thermogravimetric analysis (TGA) and the kinetic parameters of the studied samples were determined by using isoconversional (model-free) methods "Kissinger, Ozawa and Flynn-Wall (OFW) and Kissinger-Akahira-Sunose (KAS)". The results proved that the new oxidizer and its formulation based on HTPB have chlorine-free decomposition products and have higher performance characteristics than the traditional propellants.

| S-EPMC9079109 | biostudies-literature

Design of a Transcriptional Biosensor for the Portable, On-Demand Detection of Cyanuric Acid.

Project description:Rapid molecular biosensing is an emerging application area for synthetic biology. Here, we engineer a portable biosensor for cyanuric acid (CYA), an analyte of interest for human and environmental health, using a LysR-type transcription regulator (LTTR) from Pseudomonas within the context of Escherichia coli gene expression machinery. To overcome cross-host portability challenges of LTTRs, we rationally engineered hybrid Pseudomonas-E. coli promoters by integrating DNA elements required for transcriptional activity and ligand-dependent regulation from both hosts, which enabled E. coli to function as a whole-cell biosensor for CYA. To alleviate challenges of whole-cell biosensing, we adapted these promoter designs to function within a freeze-dried E. coli cell-free system to sense CYA. This portable, on-demand system robustly detects CYA within an hour from laboratory and real-world samples and works with both fluorescent and colorimetric reporters. This work elucidates general principles to facilitate the engineering of a wider array of LTTR-based environmental sensors.

| S-EPMC7372534 | biostudies-literature

Reactions of α,β-Unsaturated Carbonyls with Free Chlorine, Free Bromine, and Combined Chlorine.

Project description:Chemical disinfectants employed in water and wastewater treatment can produce a variety of transformation products, including carbonyl compounds (e.g., saturated and unsaturated aldehydes and ketones). Experiments conducted under conditions relevant to chlorination at drinking water treatment plants and residual chlorine application in distribution systems indicate that α,β-unsaturated carbonyl compounds readily react with free chlorine and free bromine over a wide pH range but react slowly with combined chlorine (i.e., NH2Cl). For nearly all of the 11 α,β-unsaturated carbonyl compounds studied, the apparent second-order rate constants for the reaction with free chlorine increased in a linear manner with hypochlorite (OCl-) concentrations, yielding species-specific second-order rate constants for the reaction with OCl- ranging from 0.21 to 12 M-1 s-1. Predictions based on the second-order rate constants indicate that a substantial fraction (i.e., >60%) of several of the more prominent α,β-unsaturated carbonyls (e.g., acrolein, crotonaldehyde) will be transformed to an appreciable extent in distribution systems by free chlorine. Products from the reaction of chlorine with acrolein, crotonaldehyde, and methyl vinyl ketone were tentatively identified using nuclear magnetic resonance (NMR) and gas chromatography coupled to high-resolution time-of-flight mass spectrometry (GC-HRT-MS). These products lacked unsaturated carbons and, in some cases, contained multiple halogens.

| S-EPMC9255599 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data