Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides.

ABSTRACT: The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

SUBMITTER: Zhou M

PROVIDER: S-EPMC8693081 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Semiheterogeneous Dual Nickel/Photocatalytic (Thio)etherification Using Carbon Nitrides.

Project description:A carbon nitride material can be combined with homogeneous nickel catalysts for light-mediated cross-couplings of aryl bromides with alcohols under mild conditions. The metal-free heterogeneous semiconductor is fully recyclable and couples a broad range of electron-poor aryl bromides with primary and secondary alcohols as well as water. The application for intramolecular reactions and the synthesis of active pharmaceutical ingredients was demonstrated. The catalytic protocol is applicable for the coupling of aryl iodides with thiols as well.

| S-EPMC6750873 | biostudies-literature

A New Synthesis Approach for Carbon Nitrides: Poly(triazine imide) and Its Photocatalytic Properties.

Project description:Poly(triazine imide) (PTI) is a material belonging to the group of carbon nitrides and has shown to have competitive properties compared to melon or g-C3N4, especially in photocatalysis. As most of the carbon nitrides, PTI is usually synthesized by thermal or hydrothermal approaches. We present and discuss an alternative synthesis for PTI which exhibits a pH-dependent solubility in aqueous solutions. This synthesis is based on the formation of radicals during electrolysis of an aqueous melamine solution, coupling of resulting melamine radicals and the final formation of PTI. We applied different characterization techniques to identify PTI as the product of this reaction and report the first liquid state NMR experiments on a triazine-based carbon nitride. We show that PTI has a relatively high specific surface area and a pH-dependent adsorption of charged molecules. This tunable adsorption has a significant influence on the photocatalytic properties of PTI, which we investigated in dye degradation experiments.

| S-EPMC5928491 | biostudies-literature

Electron Deficient Monomers that Optimize Nucleation and Enhance the Photocatalytic Redox Activity of Carbon Nitrides.

Project description:Polymeric carbon nitride (PCN) is usually synthesized from nitrogen-rich monomers such as cyanamide, melamine, and urea, but is rather disordered in many cases. Now, a new allotrope of carbon nitride with internal heterostructures was obtained by co-condensation of very electron poor monomers (for example, 5-amino-tetrazole and nucleobases) in the presence of mild molten salts (for example, NaCl/KCl) to mediate the polymerization kinetics and thus modulate the local structure, charge carrier properties, and most importantly the HOMO and LUMO levels. Results reveal that the as-prepared NaK-PHI-A material shows excellent photo-redox activities because of a nanometric hetero-structure which enhances visible light absorption and promotes charge separation in the different domains.

| S-EPMC6856808 | biostudies-literature

Photocatalytic hydrogen production using polymeric carbon nitride with a hydrogenase and a bioinspired synthetic Ni catalyst.

Project description:Solar-light-driven H2 production in water with a [NiFeSe]-hydrogenase (H2ase) and a bioinspired synthetic nickel catalyst (NiP) in combination with a heptazine carbon nitride polymer, melon (CN(x)), is reported. The semibiological and purely synthetic systems show catalytic activity during solar light irradiation with turnover numbers (TONs) of more than 50,000?mol?H2(mol?H2ase)(-1) and approximately 155?mol?H2?(mol?NiP)(-1) in redox-mediator-free aqueous solution at pH?6 and 4.5, respectively. Both systems maintained a reduced photoactivity under UV-free solar light irradiation (?>420?nm).

| S-EPMC4497605 | biostudies-literature

Photocatalytic Hydrogen Production using Polymeric Carbon Nitride with a Hydrogenase and a Bioinspired Synthetic Ni Catalyst.

Project description:Solar-light-driven H2 production in water with a [NiFeSe]-hydrogenase (H2ase) and a bioinspired synthetic nickel catalyst (NiP) in combination with a heptazine carbon nitride polymer, melon (CNx), is reported. The semibiological and purely synthetic systems show catalytic activity during solar light irradiation with turnover numbers (TONs) of more than 50 000 mol H2 (mol H2ase)-1 and approximately 155 mol H2 (mol NiP)-1 in redox-mediator-free aqueous solution at pH 6 and 4.5, respectively. Both systems maintained a reduced photoactivity under UV-free solar light irradiation (λ>420 nm).

| S-EPMC4535659 | biostudies-literature

Transparent TiO2 thin films with high photocatalytic activity for indoor air purification.

Project description:The development of low-material-quantity, transparent, anatase TiO2 nanoparticle free thin films as photocatalytic materials together with a profound understanding of their photocatalytic activity under ultraviolet (UV-A) and visible (VIS) light is crucial for environmentally friendly indoor air photocatalytic coatings. In this work, a TiO2 thin film modified by an increased amount of acetylacetone in the precursor solution with a material quantity of 0.2 mg cm-2 was successfully deposited on a borosilicate glass substrate by ultrasonic spray pyrolysis. VOC degradation as a single model pollutant and in mixtures under different operating conditions was studied in a multi-section continuous flow reactor. Under UV-A the reaction rate constants for heptane and toluene oxidation as individual pollutants were 1.7 and 0.9 ppm s-1, respectively. In 9 ppm VOC mixtures of acetaldehyde, acetone, heptane and toluene all the compounds were completely oxidized in a reaction time of less than 50 s. The TiO2 film showed moderately high photocatalytic activity under VIS light. The conversions of acetaldehyde, acetone, heptane and toluene in 9 ppm VOC mixtures under VIS light reached 100, 100, 78 and 31%, respectively. The synthesized TiO2 film shows promising ability in indoor air purification from VOCs. The results of this study give an extensive estimation of the thin film's photocatalytic efficiency and provide valuable data for future applications in environmental remediation.

| S-EPMC9743414 | biostudies-literature

Near-Room-Temperature Ethanol Detection Using Ag-Loaded Mesoporous Carbon Nitrides.

Project description:Development of room-temperature gas sensors is a much sought-after aspect that has fostered research in realizing new two-dimensional materials with high surface area for rapid response and low-ppm detection of volatile organic compounds (VOCs). Herein, a fast-response and low-ppm ethanol gas sensor operating at near room temperature has been fabricated successfully by utilizing cubic mesoporous graphitic carbon nitride (g-CN, commonly known as g-C3N4), synthesized through template inversion of mesoporous silica, KIT-6. Upon exposure to 50 ppm ethanol at 250 °C, the optimized Ag/g-CN showed a significantly higher response (R a/R g = 49.2), fast response (11.5 s), and full recovery within 7 s in air. Results of sensing tests conducted at 40 °C show that the sensor exhibits not only a highly selective response to 50 ppm (R a/R g = 1.3) and 100 ppm (R a/R g = 3.2) of ethanol gas but also highly reversible and rapid response and recovery along with long-term stability. This outstanding response is due to its easily accessible three-dimensional mesoporous structure with higher surface area and unique planar morphology of Ag/g-CN. This study could provide new avenues for the design of next-generation room-temperature VOC sensors for effective and efficient monitoring of alarming concern over indoor environment.

| S-EPMC6641218 | biostudies-literature

Comparison of Graphitic Carbon Nitrides Synthetized from Melamine and Melamine-Cyanurate Complex: Characterization and Photocatalytic Decomposition of Ofloxacin and Ampicillin.

Project description:Graphitic carbon nitride (g-C3N4, hereafter abbreviated as CN) was prepared by the heating of melamine (CN-M) and melamine-cyanurate complex (CN-MCA), respectively, in air at 550 °C for 4 h. The specific surface area (SSA) of CN-M and CN-MCA was 12 m2 g-1 and 225 m2g-1 and the content of oxygen was 0.62 wt.% and 1.88 wt.%, respectively. The band gap energy (Eg) of CN-M was 2.64 eV and Eg of CN-MCA was 2.73 eV. The photocatalytic activity of the CN materials was tested by means of the decomposition of antibiotics ofloxacin and ampicillin under LED irradiation of 420 nm. The activity of CN-MCA was higher due to its high SSA, which was determined based on the physisorption of nitrogen. Ofloxacin was decomposed more efficiently than ampicillin in the presence of both photocatalysts.

| S-EPMC8070965 | biostudies-literature

Highly Crystalline K-Intercalated Polymeric Carbon Nitride for Visible-Light Photocatalytic Alkenes and Alkynes Deuterations.

Project description:In addition to the significance of photocatalytic hydrogen evolution, the utilization of the in situ generated H/D (deuterium) active species from water splitting for artificial photosynthesis of high value-added chemicals is very attractive and promising. Herein, photocatalytic water splitting technology is utilized to generate D-active species (i.e., Dad) that can be stabilized on anchored 2nd metal catalyst and are readily for tandem controllable deuterations of carbon-carbon multibonds to produce high value-added D-labeled chemicals/pharmaceuticals. A highly crystalline K cations intercalated polymeric carbon nitride (KPCN), rationally designed, and fabricated by a solid-template induced growth, is served as an ultraefficient photocatalyst, which shows a greater than 18-fold enhancement in the photocatalytic hydrogen evolution over the bulk PCN. The photocatalytic in situ generated D-species by superior KPCN are utilized for selective deuteration of a variety of alkenes and alkynes by anchored 2nd catalyst, Pd nanoparticles, to produce the corresponding D-labeled chemicals and pharmaceuticals with high yields and D-incorporation. This work highlights the great potential of developing photocatalytic water splitting technology for artificial photosynthesis of value-added chemicals instead of H2 evolution.

| S-EPMC6325627 | biostudies-literature

Metal-Free Carbon Quantum Dots Implant Graphitic Carbon Nitride: Enhanced Photocatalytic Dye Wastewater Purification with Simultaneous Hydrogen Production.

Project description:The use of photocatalysts to purify wastewater and simultaneously convert solar energy into clean hydrogen energy is of considerable significance in environmental science. However, it is still a challenge due to their relatively high costs, low efficiencies, and poor stabilities. In this study, a metal-free carbon quantum dots (CQDs) modified graphitic carbon nitride photocatalyst (CCN) was synthesized by a facile method. The characterization and theoretical calculation results reveal that the incorporation of CQDs into the g-C3N4 matrix significantly improves the charge transfer and separation efficiency, exhibits a redshift of absorption edge, narrows the bandgap, and prevents the recombination of photoexcited carriers. The hydrogen production and simultaneous degradation of methylene blue (MB) or rhodamine B (RhB) in simulated wastewaters were further tested. In the simulated wastewater, the CCN catalyst showed enhanced photodegradation efficiency, accompanied with the increased hydrogen evolution rate (1291 µmol·h-1·g-1). The internal electrical field between the g-C3N4 and the CQDs is the main reason for the spatial separation of photoexcited electron-hole pairs. Overall, this work could offer a new protocol for the design of highly efficient photocatalysts for dye wastewater purification with simultaneous hydrogen production.

| S-EPMC7036787 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data