Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Sensitive, Portable Microfluidic Device for SARS-CoV-2 Detection from Self-Collected Saliva.

ABSTRACT: Since the outbreak of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic in December 2019, the spread of SARS-CoV2 infection has been escalating rapidly around the world. In order to provide more timely access to medical intervention, including diagnostic tests and medical treatment, the FDA authorized multiple test protocols for diagnostic tests from nasopharyngeal swab, saliva, urine, bronchoalveolar lavage and fecal samples. The traditional diagnostic tests for this novel coronavirus 2019 require standard processes of viral RNA isolation, reverse transcription of RNA to cDNA, then real-time quantitative PCR with the RNA templates extracted from the patient samples. Recently, many reports have demonstrated a direct detection of SARS-Co-V2 genomic material from saliva samples without any RNA isolation step. To make the rapid detection of SARS-Co-V2 infection more accessible, a point-of-care type device was developed for SARS-CoV-2 detection. Herein, we report a portable microfluidic-based integrated detection-analysis system for SARS-CoV-2 nucleic acids detection directly from saliva samples. The saliva cartridge is self-contained and capable of microfluidic evaluation of saliva, from heating, mixing with the primers to multiplex real-time quantitative polymerase chain reaction, detecting SARS-CoV-2 with different primer sets and internal control. The approach has a detection sensitivity of 1000 copies/mL of SARS-CoV-2 RNA or virus, with consistency and automation, from saliva sample-in to result-out.

SUBMITTER: Yang J

PROVIDER: S-EPMC8701218 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Portable microfluidic impedance biosensor for SARS-CoV-2 detection.

Project description:Pandemics as the one we are currently facing, where fast-spreading viruses present a threat to humanity, call for simple and reliable methods to perform early diagnosis, enabling detection of very low pathogen loads even before symptoms start showing in the host. So far, standard polymerase chain reaction (PCR) is the most reliable method for doing so, but it is rather slow and needs specialized reagents and trained personnel to operate it. Additionally, it is expensive and not easily accessible. Therefore, developing miniaturized and portable sensors which perform early detection of pathogens with high reliability is necessary to not only prevent the spreading of the disease but also to monitor the effectiveness of the developed vaccines and the appearance of new pathogenic variants. Thus, in this work we develop a sensitive microfluidic impedance biosensor for the direct detection of SARS-CoV-2, towards a mobile point-of-care (POC) platform. The operational parameters are optimized with the aid of design-of-experiment (DoE), for an accurate detection of the viral antigens using electrochemical impedance spectroscopy (EIS). We perform the biodetection of buffer samples spiked with fM concentration levels and validate the biosensor in a clinical context of relevance by analyzing 15 real patient samples up to a Ct value (cycle threshold) of 27. Finally, we demonstrate the versatility of the developed platform using different settings, including a small portable potentiostat, using multiple channels for self-validation, as well as with single biosensors for a smartphone-based readout. This work contributes to the rapid and reliable diagnostics of COVID-19 and can be extended to other infectious diseases, allowing the monitoring of viral load in vaccinated and unvaccinated people to anticipate a potential relapse of the disease.

| S-EPMC10170873 | biostudies-literature

Electromechanical RT-LAMP device for portable SARS-CoV-2 detection.

Project description:Rapid point-of-care tests for infectious diseases are essential, especially in pandemic conditions. We have developed a point-of-care electromechanical device to detect SARS-CoV-2 viral RNA using the reverse-transcription loop-mediated isothermal amplification (RT-LAMP) principle. The developed device can detect SARS-CoV-2 viral RNA down to 103 copies/mL and from a low amount of sample volumes (2 μL) in less than an hour of standalone operation without the need for professional labor and equipment. Integrated Peltier elements in the device keep the sample at a constant temperature, and an integrated camera allows automated monitoring of LAMP reaction in a stirring sample by using colorimetric analysis of unfocused sample images in the hue/saturation/value color space. This palm-fitting, portable and low-cost device does not require a fully focused sample image for analysis, and the operation could be stopped automatically through image analysis when the positive test results are obtained. Hence, viral infections can be detected with the portable device produced without the need for long, expensive, and labor-intensive tests and equipment, which can make the viral tests disseminated at the point-of-care.

| S-EPMC9733968 | biostudies-literature

A Portable Device for LAMP Based Detection of SARS-CoV-2.

Project description:This paper reports the design, development, and testing of a novel, yet simple and low-cost portable device for the rapid detection of SARS-CoV-2. The device performs loop mediated isothermal amplification (LAMP) and provides visually distinguishable images of the fluorescence emitted from the samples. The device utilises an aluminium block embedded with a cartridge heater for isothermal heating of the sample and a single-board computer and camera for fluorescence detection. The device demonstrates promising results within 20 min using clinically relevant starting concentrations of the synthetic template. Time-to-signal data for this device are considerably lower compared to standard quantitative Polymerase Chain Reaction(qPCR) machine (~10-20 min vs. >38 min) for 1 × 102 starting template copy number. The device in its fully optimized and characterized state can potentially be used as simple to operate, rapid, sensitive, and inexpensive platform for population screening as well as point-of-need severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2) detection and patient management.

| S-EPMC8538454 | biostudies-literature

Amperometric immunosensor developed for sensitive detection of SARS-CoV-2 spike S1 protein in combined with portable device.

Project description:In this present study, an amperometric immunosensor was developed based on disposable screen-printed carbon electrode (SPCE) for specific and sensitive detection of SARS-CoV-2 S1 protein. Anti-SARS-CoV-2 S1 monoclonal antibody was firstly immobilized onto the electrode surface. Then, the sandwich complex was formed by addition of S1 protein, secondary antibody and HRP-IgG, respectively. Chronoamperometry measurements were done in the presence of TMB mediator and the detection of SARS-CoV-2 S1 protein was performed by using 10 μL sample. The limit of detection (LOD) was found to be 0.19 ng/mL (equals to 24.7 amol in 10 μL sample) in the linear range of 0.5-10 ng/mL obtained in buffer medium. The applicability of this assay was investigated in the linear range of 0.5-3 ng/mL S1 protein in artificial saliva medium with the LOD as 0.13 ng/mL (equals to 16.9 amol in 10 μL sample). The selectivity study was examined in the presence of Hemagglutinin antigen (HA) in both mediums; buffer and artificial saliva while resulting with the successful discrimination between S1 protein and HA. The one of ultimate goals of our study is to present the possible implementation of this assay to point of care (POC) analysis. Under this aim, this assay was performed in combination with a portable device that is the commercial electrochemical analyzer. Amperometric detection of S1 protein in the range of 0.5-5 ng/mL was also successfully performed in artificial saliva medium with a resulting LOD as 0.15 ng/mL (equals to 19.5 amol in 10 μL sample). In addition, a selectivity study was similarly carried out by portable device.

| S-EPMC8963973 | biostudies-literature

Sensitive detection and quantification of SARS-CoV-2 in saliva.

Project description:Saliva has significant advantages as a test medium for detection of SARS-CoV-2 infection in patients, such as ease of collection, minimal requirement of supplies and trained personnel, and safety. Comprehensive validation in a large cohort of prospectively collected specimens with unknown SARS-CoV-2 status should be performed to evaluate the potential and limitations of saliva-based testing. We developed a saliva-based testing pipeline for detection of SARS-CoV-2 nucleic acids using real-time reverse transcription PCR (RT-PCR) and droplet digital PCR (ddPCR) readouts, and measured samples from 137 outpatients tested at a curbside testing facility and 29 inpatients hospitalized for COVID-19. These measurements were compared to the nasal swab results for each patient performed by a certified microbiology laboratory. We found that our saliva testing positively detects 100% (RT-PCR) and 93.75% (ddPCR) of curbside patients that were identified as SARS-CoV-2 positive by the Emergency Use Authorization (EUA) certified nasal swab testing assay. Quantification of viral loads by ddPCR revealed an extremely wide range, with 1 million-fold difference between individual patients. Our results demonstrate for both community screening and hospital settings that saliva testing reliability is on par with that of the nasal swabs in detecting infected cases, and has potential for higher sensitivity when combined with ddPCR in detecting low-abundance viral loads that evade traditional testing methods.

| S-EPMC8203799 | biostudies-literature

Salivette, a relevant saliva sampling device for SARS-CoV-2 detection.

Project description:Background: The gold standard for COVID-19 diagnosis relies on quantitative reverse-transcriptase polymerase-chain reaction (RT-qPCR) from nasopharyngeal swab (NPS) specimens, but NPSs present several limitations. The simplicity, low invasive and possibility of self-collection of saliva imposed these specimens as a relevant alternative for SARS-CoV-2 detection. However, the discrepancy of saliva test results compared to NPSs made of its use controversial. Here, we assessed Salivettes®, as a standardized saliva collection device, and compared SARS-CoV-2 positivity on paired NPS and saliva specimens. Methods: A total of 303 individuals randomly selected among those investigated for SARS-CoV-2 were enrolled, including 30 (9.9%) patients previously positively tested using NPS (follow-up group), 90 (29.7%) mildly symptomatic and 183 (60.4%) asymptomatic. Results: The RT-qPCR revealed a positive rate of 11.6% (n = 35) and 17.2% (n = 52) for NPSs and saliva samples, respectively. The sensitivity and specificity of saliva samples were 82.9% and 91.4%, respectively, using NPS as reference. The highest proportion of discordant results concerned the follow-up group (33.3%). Although the agreement exceeded 90.0% in the symptomatic and asymptomatic groups, 17 individuals were detected positive only in saliva samples, with consistent medical arguments. Conclusion Saliva collected with Salivette® was more sensitive for detecting symptomatic and pre-symptomatic infections.

| S-EPMC8098750 | biostudies-literature

Performance of Self-Collected Saliva Testing Compared with Nasopharyngeal Swab Testing for the Detection of SARS-CoV-2.

Project description:The aim of this study was to determine whether self-collected pure saliva (SCPS) is comparable to nasopharyngeal (NP) swabs in the quantitative detection of SARS-CoV-2 by RT-PCR in asymptomatic, mild patients with confirmed COVID-19. Thirty-one patients aged from 18 to 85 years were included between 9 June and 11 December 2020. A SCPS sample and a NP sample were taken for each patient. Quantitative PCR was performed to detect SARS-CoV-2 viral load. Results of SCPS vs. NP samples testing were compared. Statistical analyses were performed. Viral load was significantly correlated (r = 0.72). The concordance probability was estimated at 73.3%. In symptomatic adults, SCPS performance was similar to that of NP swabs (Percent Agreement = 74.1%; p = 0.11). Thus, the salivary test based on pure oral saliva samples easily obtained by noninvasive techniques has a fair agreement with the nasopharyngeal one in asymptomatic, mild patients with a confirmed diagnosis of COVID-19.

| S-EPMC8150338 | biostudies-literature

Self-Collected Anterior Nasal and Saliva Specimens versus Health Care Worker-Collected Nasopharyngeal Swabs for the Molecular Detection of SARS-CoV-2.

Project description:We prospectively compared health care worker-collected nasopharyngeal swabs (NPS) to self-collected anterior nasal swabs (ANS) and straight saliva for the diagnosis of coronavirus disease 2019 (COVID-19) in 354 patients. The percent positive agreement between NPS and ANS or saliva was 86.3% (95% confidence interval [CI], 76.7 to 92.9%) and 93.8% (95% CI, 86.0 to 97.9%), respectively. The percent negative agreement was 99.6% (95% CI, 98.0 to 100.0%) for NPS versus ANS and 97.8% (95% CI, 95.3 to 99.2%) for NPS versus saliva. More cases were detected by the use of NPS (n = 80) and saliva (n = 81) than by the use of ANS (n = 70), but no single specimen type detected all severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infections.

| S-EPMC7587122 | biostudies-literature

Quantitative serology for SARS-CoV-2 using self-collected saliva and finger-stick blood.

Project description:Convenient and widespread serology testing may alter the trajectory of the COVID-19 pandemic. This study seeks to leverage high-throughput, multiplexed serologic assays, which have been adopted as benchmarks for vaccine efficacy, to support large-scale surveys of SARS-CoV-2 immunity using finger-stick blood and/or saliva. Specifically, we optimized MSD's serology assays, which were analytically validated for serum, to test self-collected finger-stick blood and saliva samples to identify prior infection. We show that these assays can be used with FDA-registered specimen collection devices to obtain quantitative measurements for self-collected samples. First, we show that salivary antibodies are stable without refrigeration or preservatives for at least 5 days. We selected classification thresholds for antibodies against SARS-CoV-2 N, RBD and Spike in finger-stick blood and saliva that provided 98% specificity in a set of individuals without known COVID-19 exposure. Using matched samples, we show that testing of saliva and finger-stick blood equivalently identified individuals with humoral responses to CoV-2 antigens. Moreover, we piloted a simple saliva collection kit that can be used to safely send samples through the mail using written instructions only. This work establishes key parameters to robustly assay self-collected finger-stick blood and saliva using quantitative immunoassays that could support large-scale serology testing.

| S-EPMC9021827 | biostudies-literature

Blood and saliva SARS-CoV-2 antibody levels in self-collected dried spot samples.

Project description:We examined the usefulness of dried spot blood and saliva samples in SARS-CoV-2 antibody analyses. We analyzed 1231 self-collected dried spot blood and saliva samples from healthcare workers. Participants filled in a questionnaire on their COVID-19 exposures, infections, and vaccinations. Anti-SARS-CoV-2 IgG, IgA, and IgM levels were determined from both samples using the GSP/DELFIA method. The level of exposure was the strongest determinant of all blood antibody classes and saliva IgG, increasing as follows: (1) no exposure (healthy, non-vaccinated), (2) exposed, (3) former COVID-19 infection, (4) one vaccination, (5) two vaccinations, and (6) vaccination and former infection. While the blood IgG assay had a 99.5% sensitivity and 75.3% specificity to distinguish participants with two vaccinations from all other types of exposure, the corresponding percentages for saliva IgG were 85.3% and 65.7%. Both blood and saliva IgG-seropositivity proportions followed similar trends to the exposures reported in the questionnaires. Self-collected dry blood and saliva spot samples combined with the GSP/DELFIA technique comprise a valuable tool to investigate an individual's immune response to SARS-CoV-2 exposure or vaccination. Saliva IgG has high potential to monitor vaccination response wane, since the sample is non-invasive and easy to collect.

| S-EPMC9191541 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data