Electrode-Electrolyte Interactions in an Aqueous Aluminum-Carbon Rechargeable Battery System.
Ontology highlight
ABSTRACT:
SUBMITTER: Smajic J
PROVIDER: S-EPMC8704015 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Aluminum is a naturally abundant, trivalent charge carrier with high theoretical specific capacity and volumetric energy density, rendering aluminum-ion batteries a technology of choice for future large-scale energy storage. However, the frequent collapse of the host structure of the cathode materials and sluggish kinetics of aluminum ion diffusion have thus far hampered the realization of practical battery devices. Here, we synthesize AlxMnO2·nH2O by an in-situ electrochemical transformation reaction to be used as a cathode material for an aluminum-ion battery with a configuration of Al/Al(OTF)3-H2O/AlxMnO2·nH2O. This cell is not only based on aqueous electrolyte chemistry but also delivers a high specific capacity of 467?mAh?g-1 and a record high energy density of 481?Wh?kg-1. The high safety of aqueous electrolyte, facile cell assembly and the low cost of materials suggest that this aqueous aluminum-ion battery holds promise for large-scale energy applications.
| S-EPMC6325165 | biostudies-literature
Project description:Aqueous rechargeable metal batteries are intrinsically safe due to the utilization of low-cost and non-flammable water-based electrolyte solutions. However, the discharge voltages of these electrochemical energy storage systems are often limited, thus, resulting in unsatisfactory energy density. Therefore, it is of paramount importance to investigate alternative aqueous metal battery systems to improve the discharge voltage. Herein, we report reversible manganese-ion intercalation chemistry in an aqueous electrolyte solution, where inorganic and organic compounds act as positive electrode active materials for Mn2+ storage when coupled with a Mn/carbon composite negative electrode. In one case, the layered Mn0.18V2O5·nH2O inorganic cathode demonstrates fast and reversible Mn2+ insertion/extraction due to the large lattice spacing, thus, enabling adequate power performances and stable cycling behavior. In the other case, the tetrachloro-1,4-benzoquinone organic cathode molecules undergo enolization during charge/discharge processes, thus, contributing to achieving a stable cell discharge plateau at about 1.37 V. Interestingly, the low redox potential of the Mn/Mn2+ redox couple vs. standard hydrogen electrode (i.e., -1.19 V) enables the production of aqueous manganese metal cells with operational voltages higher than their zinc metal counterparts.
| S-EPMC8632892 | biostudies-literature
Project description:Energy and environmental pollution have become the two major problems in today's society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1?V and energy density based on the two electrode materials is 258?Wh kg(-1). It will be a promising energy storage system with good safety and efficient cooling effects.
| S-EPMC4916472 | biostudies-literature
Project description:New energy industry including electric vehicles and large-scale energy storage in smart grids requires energy storage systems of good safety, high reliability, high energy density and low cost. Here a coated Li metal is used as anode for an aqueous rechargeable lithium battery (ARLB) combining LiMn2O4 as cathode and 0.5?mol l(-1) Li2SO4 aqueous solution as electrolyte. Due to the "cross-over" effect of Li(+) ions in the coating, this ARLB delivers an output voltage of about 4.0?V, a big breakthrough of the theoretic stable window of water, 1.229?V. Its cycling is very excellent with Coulomb efficiency of 100% except in the first cycle. Its energy density can be 446?Wh kg(-1), about 80% higher than that for traditional lithium ion battery. Its power efficiency can be above 95%. Furthermore, its cost is low and safety is much reliable. It provides another chemistry for post lithium ion batteries.
| S-EPMC3590562 | biostudies-literature
Project description:Electrochemical cells based on aluminum (Al) are of long-standing interest because Al is earth abundant, low cost, and chemically inert. The trivalent Al3+ ions also offer among the highest volume-specific charge storage capacities (8040 mAh cm-3), approximately four times larger than achievable for Li metal anodes. Rapid and irreversible formation of a high-electrical bandgap passivating Al2O3 oxide film on Al have, to date, frustrated all efforts to create aqueous Al-based electrochemical cells with high reversibility. Here, we investigate the interphases formed on metallic Al in contact with ionic liquid (IL)-eutectic electrolytes and find that artificial solid electrolyte interphases (ASEIs) formed spontaneously on the metal permanently transform its interfacial chemistry. The resultant IL-ASEIs are further shown to enable aqueous Al electrochemical cells with unprecedented reversibility. As an illustration of the potential benefits of these interphases, we create simple Al||MnO2 aqueous cells and report that they provide high specific energy (approximately 500 Wh/kg, based on MnO2 mass in the cathode) and intrinsic safety features required for applications.
| S-EPMC6269156 | biostudies-literature
Project description:Rechargeable aqueous Zn/manganese dioxide (Zn/MnO2) batteries are attractive energy storage technology owing to their merits of low cost, high safety, and environmental friendliness. However, the ?-MnO2 cathode is still plagued by the sluggish ion insertion kinetics due to the relatively narrow tunneled pathway. Furthermore, the energy storage mechanism is under debate as well. Here, ?-MnO2 cathode with enhanced ion insertion kinetics is introduced by the efficient oxygen defect engineering strategy. Density functional theory computations show that the ?-MnO2 host structure is more likely for H+ insertion rather than Zn2+, and the introduction of oxygen defects will facilitate the insertion of H+ into ?-MnO2. This theoretical conjecture is confirmed by the capacity of 302 mA h g-1 and capacity retention of 94% after 300 cycles in the assembled aqueous Zn/?-MnO2 cell. These results highlight the potentials of defect engineering as a strategy of improving the electrochemical performance of ?-MnO2 in aqueous rechargeable batteries.
| S-EPMC6957857 | biostudies-literature
Project description:One of the main challenges of electrical energy storage (EES) is the development of environmentally friendly battery systems with high safety and high energy density. Rechargeable Mg batteries have been long considered as one highly promising system due to the use of low cost and dendrite-free magnesium metal. The bottleneck for traditional Mg batteries is to achieve high energy density since their output voltage is below 2.0 V. Here, we report a magnesium battery using Mg in Grignard reagent-based electrolyte as the negative electrode, a lithium intercalation compound in aqueous solution as the positive electrode, and a solid electrolyte as a separator. Its average discharge voltage is 2.1 V with stable discharge platform and good cycling life. The calculated energy density based on the two electrodes is high. These findings open another door to rechargeable magnesium batteries.
| S-EPMC4502397 | biostudies-literature
Project description:Redox flow batteries are receiving wide attention for electrochemical energy storage due to their unique architecture and advantages, but progress has so far been limited by their low energy density (~25?Wh?l(-1)). Here we report a high-energy density aqueous zinc-polyiodide flow battery. Using the highly soluble iodide/triiodide redox couple, a discharge energy density of 167?Wh?l(-1) is demonstrated with a near-neutral 5.0?M ZnI2 electrolyte. Nuclear magnetic resonance study and density functional theory-based simulation along with flow test data indicate that the addition of an alcohol (ethanol) induces ligand formation between oxygen on the hydroxyl group and the zinc ions, which expands the stable electrolyte temperature window to from -20 to 50?°C, while ameliorating the zinc dendrite. With the high-energy density and its benign nature free from strong acids and corrosive components, zinc-polyiodide flow battery is a promising candidate for various energy storage applications.
| S-EPMC4346617 | biostudies-literature
Project description:Graphitic carbons have been used as conductive supports for developing rechargeable batteries. However, the classic ion intercalation in graphitic carbon has yet to be coupled with extrinsic redox reactions to develop rechargeable batteries. Herein, we demonstrate the preparation of a free-standing, flexible nitrogen and phosphorus co-doped hierarchically porous graphitic carbon for iodine loading by pyrolysis of polyaniline coated cellulose wiper. We find that heteroatoms could provide additional defect sites for encapsulating iodine while the porous carbon skeleton facilitates redox reactions of iodine and ion intercalation. The combination of ion intercalation with redox reactions of iodine allows for developing rechargeable iodine-carbon batteries free from the unsafe lithium/sodium metals, and hence eliminates the long-standing safety issue. The unique architecture of the hierarchically porous graphitic carbon with heteroatom doping not only provides suitable spaces for both iodine encapsulation and cation intercalation but also generates efficient electronic and ionic transport pathways, thus leading to enhanced performance.Carbon-based electrodes able to intercalate Li+ and Na+ ions have been exploited for high performing energy storage devices. Here, the authors combine the ion intercalation properties of porous graphitic carbons with the redox chemistry of iodine to produce iodine-carbon batteries with high reversible capacities.
| S-EPMC5597605 | biostudies-literature
Project description:Poor cycling performance arising from the instability of anode is still a main challenge for aqueous rechargeable lithium batteries (ARLB). In the present work, a high performance LiTi2(PO4)3/C composite has been achieved by a novel and facile preparation method associated with an in-situ carbon coating approach. The LiTi2(PO4)3/C nanoparticles show high purity and the carbon layer is very uniform. When used as an anode material, the ARLB of LiTi2(PO4)3/C//LiMn2O4 delivered superior cycling stability with a capacity retention of 90% after 300 cycles at 30 mA g(-1) and 84% at 150 mA g(-1) over 1300 cycles. It also demonstrated excellent rate capability with reversible discharge capacities of 115 and 89 mAh g(-1) (based on the mass of anode) at 15 and 1500 mA g(-1), respectively. The superior electrochemical properties should be mainly ascribed to the high performance of LiTi2(PO4)3/C anode, benefiting from its nanostructure, high-quality carbon coating, appropriate crystal structure and excellent electrode surface stability as verified by Raman spectra, electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and scanning electron microscopy (SEM) measurements.
| S-EPMC4451790 | biostudies-other