Kinetic Analysis of Pyrolysis and Thermo-Oxidative Decomposition of Tennis String Nylon Wastes.
Ontology highlight
ABSTRACT:
SUBMITTER: Wan H
PROVIDER: S-EPMC8704089 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Physicochemical properties, kinetic pyrolysis and thermodynamic study of spent green tea, pure spent coffee grounds, spent coffee grounds blended with 50% torrefied barley and coffee husk were experimentally investigated using thermogravimetric analysis under an inert atmosphere to evaluate their thermochemical application. Five isoconversional methods were applied to determine effective activation energy (E a) of the pyrolysis processes. All methods showed good agreement by determining fluctuating E a values (150-500 kJ mol-1). Complex E a profiles with conversion were divided into four stages corresponding to thermal degradation of main biomass constituents (extractives, hemicellulose, cellulose and lignin), indicating that extractives decomposition was the least demanding reaction while lignin decomposition was the most demanding. The kinetic process was verified by reconstruction according to the Friedman parameters. The thermodynamic parameters were evaluated to determine the energy demand and efficiency throughout the process. The values obtained for physicochemical properties such as volatile matter (> 68%) and higher heating value (> 17 MJ kg-1), average E a (223-319 kJ mol-1) and significant energy efficiency implied that these types of biomass waste have significant reactivity and consequently the highest potential for the production of bioenergy and a range of high-value chemicals and materials.Supplementary informationThe online version contains supplementary material available at 10.1007/s10973-022-11878-4.
| S-EPMC9911335 | biostudies-literature
Project description:In this work, we used pyrolysis to treat teabag waste (TBW). Changes in the pyrolysis temperature affected the composition and yield of the products. For example, more non-condensable gases and less char were produced with an increase in the pyrolysis temperature. Pyrolysis conducted under a nitrogen environment yielded caprolactam at temperatures between 400 and 700 °C. An increase in the pyrolysis temperature from 400 to 500 °C increased the caprolactam yield from 3.1 to 6.2 wt.%. At 700 °C, the yield decreased to 4.6 wt.%. The highest caprolactam yield (i.e., 6.2 wt.% at 500 °C) was equivalent to 59.2 wt.% on the basis of the weight of the non-biomass part of the TBW. The pyrolytic products other than caprolactam (e.g., combustible gases, pyrolytic liquid, and char) can function as fuels to supply energy during pyrolysis in order to increase and maintain the temperature. The higher heating values (HHVs) of the combustible gases and pyrolytic liquid produced at 500 °C were 7.7 and 8.3 MJ kg-1, respectively. The HHV of the char produced at 500 °C was 23 MJ kg-1, which is comparable to the HHV of coal. This work will help to develop effective pyrolysis processes to valorize everyday waste by recovering value-added chemicals such as polymer monomers and by producing alternative fuels.
| S-EPMC7697768 | biostudies-literature
Project description:The influence of particle size (0.3 and 5.0 mm) and heating rate (5, 10, and 20 °C min-1) on the kinetic parameters of pyrolysis of waste tire was studied by thermogravimetric analysis and mathematical modeling. Kinetic parameters were determined using the Friedman model, the Coats-Redfern model, and the ASTM E1641 standard based on Arrhenius linearization. In the Friedman model, the activation energy was between 40 and 117 kJ mol-1 for a particle size of 0.3 mm and between 23 and 119 kJ mol-1 for a particle size of 5.0 mm. In the Coats-Redfern model, the activation energy is in a range of 46 to 87 kJ mol-1 for a particle size of 0.3 mm and in a range of 43 to 124 kJ mol-1 for a particle size of 5.0 mm. Finally, in the ASTM E1641 standard, the activation energy calculated was between 56 and 60 kJ mol-1 for both particle sizes. This study was performed to obtain kinetic parameters from different mathematical methods, examining how the particle size and heating rate influence them.
| S-EPMC9118263 | biostudies-literature
Project description:MOTIVATION:Recent attempts to assemble extra-long tandem repeats (such as centromeres) faced the challenge of translating long error-prone reads from the nucleotide alphabet into the alphabet of repeat units. Human centromeres represent a particularly complex type of high-order repeats (HORs) formed by chromosome-specific monomers. Given a set of all human monomers, translating a read from a centromere into the monomer alphabet is modeled as the String Decomposition Problem. The accurate translation of reads into the monomer alphabet turns the notoriously difficult problem of assembling centromeres from reads (in the nucleotide alphabet) into a more tractable problem of assembling centromeres from translated reads. RESULTS:We describe a StringDecomposer (SD) algorithm for solving this problem, benchmark it on the set of long error-prone Oxford Nanopore reads generated by the Telomere-to-Telomere consortium and identify a novel (rare) monomer that extends the set of known X-chromosome specific monomers. Our identification of a novel monomer emphasizes the importance of identification of all (even rare) monomers for future centromere assembly efforts and evolutionary studies. To further analyze novel monomers, we applied SD to the set of recently generated long accurate Pacific Biosciences HiFi reads. This analysis revealed that the set of known human monomers and HORs remains incomplete. SD opens a possibility to generate a complete set of human monomers and HORs for using in the ongoing efforts to generate the complete assembly of the human genome. AVAILABILITY AND IMPLEMENTATION:StringDecomposer is publicly available on https://github.com/ablab/stringdecomposer. SUPPLEMENTARY INFORMATION:Supplementary data are available at Bioinformatics online.
| S-EPMC7428072 | biostudies-literature
Project description:Polylactic acid (PLA) is a biodegradable polymer and is mainly used in the textile and food packaging fields. The aim of this work is to build knowledge on the kinetics of the pyrolysis of PLA with the help of thermogravimetric analysis (TGA) using four model-free methods, namely Friedman, Flynn-Wall-Qzawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink. Additionally, two model-fitting methods (the Coats-Redfern and Criado methods) were applied. TGA data at 5, 10, 20, and 30 K/min heating rates were collected. The obtained activation energies of the pyrolysis of PLA at different conversions by the model-free models were in good agreement and the average values were 97, 109, 104, and 104 kJ/mol for Friedman, FWO, KAS, and Starink, respectively. The Criado model was used together with the Coats-Redfern model to identify the most appropriate reaction mechanism. As per this work, the best controlling reaction mechanism of the PLA pyrolysis can be expressed by the geometrical contraction model (R2).
| S-EPMC9823905 | biostudies-literature
Project description:A comprehensive kinetics degradation study is carried out on novel multiple cages polyhedral oligomeric silsesquioxane (POSS)/polystyrene (PS) composites at 5% (w/w) of POSS to assess their thermal behavior with respect to the control PS and other similar POSS/PS systems studied in the past. The composites are synthesized by in situ polymerization of styrene in the presence of POSSs and characterized by 1H-NMR. The characteristics of thermal parameters are determined using kinetics literature methods, such as those developed by Kissinger and Flynn, Wall, and Ozawa (FWO), and discussed and compared with each other and with those obtained in the past for similar POSS/PS composites. A good improvement in the thermal stability with respect to neat polymer is found, but not with respect to those obtained in the past for polystyrene reinforced with single- or double-POSS cages. This behavior is attributed to the greater steric hindrance of the three-cages POSS compared with those of single- or double-cage POSS molecules.
| S-EPMC7699152 | biostudies-literature
Project description:Thermal treatment of bromine-contaminated polymers (i.e., as in e-waste) with metal oxides is currently deployed as a mainstream strategy in recycling and resources recovery from these objects. The underlying aim is to capture the bromine content and to produce pure bromine-free hydrocarbons. Bromine originates from the added brominated flame retardants (BFRs) to the polymeric fractions in printed circuits boards, where tetrabromobisphenol A (TBBA) is the most utilized BFR. Among notable deployed metal oxides is calcium hydroxide, i.e., Ca(OH)2 that often displays high debromination capacity. Comprehending thermo-kinetic parameters that account for the BFRs:Ca(OH)2 interaction is instrumental to optimize the operation at an industrial scale. Herein, we report comprehensive kinetics and thermodynamics studies into the pyrolytic and oxidative decomposition of a TBBA:Ca(OH)2 mixture at four different heating rates, 5, 10, 15, and 20 °C min-1, carried out using a thermogravimetric analyser. Fourier Transform Infrared Spectroscopy (FTIR) and a carbon, hydrogen, nitrogen, and sulphur (CHNS) elemental analyser established the vibrations of the molecules and carbon content of the sample. From the thermogravimetric analyser (TGA) data, the kinetic and thermodynamic parameters were evaluated using iso-conversional methods (KAS, FWO, and Starink), which were further validated by the Coats-Redfern method. The computed activation energies for the pyrolytic decomposition of pure TBBA and its mixture with Ca(OH)2 reside in the narrow ranges of 111.7-112.1 kJ mol-1 and 62.8-63.4 kJ mol-1, respectively (considering the various models). Obtained negative ΔS values suggest the formation of stable products. The synergic effects of the blend exhibited positive values in the low-temperature ranges (200-300 °C) due to the emission of HBr from TBBA and the solid-liquid bromination process occurring between TBBA and Ca(OH)2. From a practical point of view, data provided herein are useful in efforts that aim to fine-tune operational conditions encountered in real recycling scenarios, i.e., in co-pyrolysis of e-waste with Ca(OH)2 in rotary kilns.
| S-EPMC9973547 | biostudies-literature
Project description:In the times of Covid-19, face masks are considered to be the main source of protection against the virus that reduces its spread. These masks are classified as single-use medical products with a very short service life, estimated at few days, hence millions of contaminated masks are generated daily in the form of hazardous materials, what requires to develop a safe method to dispose of them, especially since some of them are loaded with viruses. 3-ply face masks (3PFM) represent the major fraction of this waste and are composed mainly from polypropylene and melt blown filter with high content of volatile substances (96.6 wt.%), what makes pyrolysis treatment an emerging technology that could be used to dispose of face masks and convert them into energy products. In this context, this work aims to study pyrolysis kinetic behaviour and TG-FTIR-GC-MS analysis of 3PFM. The research started with analysis of 3PFM using elemental analysis, proximate analysis, and compositional analyses. Afterwards, TG-FTIR system was used to study the thermal and chemical decomposition of 3PFM analyzed at different heating rates: 5, 10, 15, 20, 25, and 30 °C/min. The GC/MS system was used to observe the synthesized volatile products at the maximum decomposition temperatures. After that, isoconversional methods, the advanced nonlinear integral isoconversional method, and the iterative linear integral isoconversional method were used to determine the activation energies of mask pyrolysis, while the distributed activation energy model and the independent parallel reactions kinetic model were used to fit TGA and DTG curves with deviations below <1. The TGA-DTG results showed that 3PFM can decompose in three different periods with a total weight loss of 95 % and maximum decomposition in the range 405-510 °C, while the FTIR spectra and GC-MS analysis exhibited that - C-H (aromatic and aliphatic) and 2,4-Dimethyl-1-heptene (28-43 % based on heating rate) represented the major compounds in the released volatile components. Finally, Vyazovkin and the iterative linear integral isoconversional methods gave activation energies almost similar to that obtained by the KAS isoconversional method.
| S-EPMC8045431 | biostudies-literature
Project description:This study investigated the co-pyrolysis of blends of sewage sludge (SS) with rice husk (RH) and with hemp straw (HS) at different ratios by using thermogravimetry (TG) and its rate (DTG, derivative TG) analysis at heating rates of 10, 20, and 30 K/min. The resulting kinetic parameters of activation energy (E a) were calculated by both Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose models, followed by comparison of experimental values with calculated values to reveal the synergistic effects of SS/RH and SS/HS. With increasing additions of RH or HS to SS, a gradual decreasing trend in the experimental pyrolysis temperature range was evident, ranging from 144.5 to 95.2 °C for SS/RH and from 144.5 to 88.8 °C for SS/RH. Moreover, such temperature ranges were 6.7-20.4 °C less than the calculated values at the same blending ratio. The fitting results of the two kinetic models showed that with the same SS mass ratio, the experimental E a * (average activation energy) of both SS/RH and SS/HS were less than the calculated E a *. Especially, the experimental E a * of 7SS-3RH was lower around 43.8% than the calculated E a *, whereas the experimental E a * of 3SS-7HS was lower by about 39.4% than the calculated E a *. Synergistic analysis demonstrated that the co-pyrolysis of RH or HS with SS at various mass ratios presented obvious synergistic effects and then the decrease of E a. The mechanism experiment showed that the co-pyrolysis of SS/HS may promote the decrease of E a by changing the co-pyrolysis gas products or by increasing the overflow of volatile matter and then forming intermediate transition products, while SS/RH may accelerate the decrease of the E a by using an appropriate K addition ratio from RH as a metal catalyst.
| S-EPMC8757449 | biostudies-literature
Project description:The public has started to increasingly scrutinize the proper disposal and treatment of rapidly growing medical wastes, in particular, given the COVID-19 pandemic, raised awareness, and the advances in the health sector. This research aimed to characterize pyrolysis drivers, behaviors, products, reaction mechanisms, and pathways via TG-FTIR and Py-GC/MS analyses as a function of the two medical plastic wastes of syringes (SY) and medical bottles (MB), conversion degree, degradation stage, and the four heating rates (5,10, 20, and 40 °C/min). SY and MB pyrolysis ranged from 394.4 to 501 and from 417.9 to 517 °C, respectively. The average activation energy was 246.5 and 268.51 kJ/mol for the SY and MB devolatilization, respectively. MB appeared to exhibit a better pyrolysis performance with a higher degradation rate and less residues. The most suitable reaction mechanisms belonged to a geometrical contraction model (R2) for the SY pyrolysis and to a nucleation growth model (A1.2) for the MB pyrolysis. The main evolved gases were C4-C24 alkenes and dienes for SY and C6-C41 alkanes and C8-C41 alkenes for MB. The pyrolysis dynamics and reaction pathways of the medical plastic wastes have important implications for waste stream reduction, pollution control, and reactor optimization.
| S-EPMC7362864 | biostudies-literature