Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly Efficient Candlelight Organic Light-Emitting Diode with a Very Low Color Temperature.

ABSTRACT: Low color temperature candlelight organic light-emitting diodes (LEDs) are human and environmentally friendly because of the absence of blue emission that might suppress at night the secretion of melatonin and damage retina upon long exposure. Herein, we demonstrated a lighting device incorporating a phenoxazine-based host material, 3,3-bis(phenoxazin-10-ylmethyl)oxetane (BPMO), with the use of orange-red and yellow phosphorescent dyes to mimic candlelight. The resultant BPMO-based simple structured candlelight organic LED device permitted a maximum exposure limit of 57,700 s, much longer than did a candle (2750 s) or an incandescent bulb (1100 s) at 100 lx. The resulting device showed a color temperature of 1690 K, which is significantly much lower than that of oil lamps (1800 K), candles (1900 K), or incandescent bulbs (2500 K). The device showed a melatonin suppression sensitivity of 1.33%, upon exposure for 1.5 h at night, which is 66% and 88% less than the candle and incandescent bulb, respectively. Its maximum power efficacy is 23.1 lm/W, current efficacy 22.4 cd/A, and external quantum efficiency 10.2%, all much higher than the CBP-based devices. These results encourage a scalable synthesis of novel host materials to design and manufacture high-efficiency candlelight organic LEDs.

SUBMITTER: Shahnawaz

PROVIDER: S-EPMC8707034 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A multi-zoned white organic light-emitting diode with high CRI and low color temperature.

Project description:White organic light emitting diodes (WOLEDs) is becoming a new platform technology for a range of applications such as flat-panel displays, solid-state lightings etc., and are under intensive research. For general solid-state illumination applications, a WOLED's color rendering index (CRI) and correlated color temperature (CCT) are two crucial parameters. This paper reports that WOLED device structures can be constructed using four stacked emission layers which independently emit lights at blue, green, yellow and red color respectively. The intensity of each emission layer is then engineered by funneling excitons to the targeted emission layer to achieve an ultrahigh 92 CRI at 5000?cd/m(2), and to reduce CCT to below 2500?K.

| S-EPMC4740810 | biostudies-other

The fabrication of color-tunable organic light-emitting diode displays via solution processing.

Project description:Electroluminescent devices based on organic semiconductors have attracted significant attention owing to their promising applications in flat-panel displays. The conventional display pixel consisting of side-by-side arrayed red, green and blue subpixels represents the mature technology but bears an intrinsic deficiency of a low pixel density. Constructing an individual color-tunable pixel that comprises vertically stacked subpixels is considered an advanced technology. Although color-tunable organic light-emitting diodes (OLEDs) have been fabricated using the vacuum deposition of small molecules, the solution processing of conjugated polymers would enable a much simpler and inexpensive manufacturing process. Here we present the all-solution processing of color-tunable OLEDs comprising two vertically stacked polymer emitters. A thin layer of highly conducting and transparent silver nanowires is introduced as the intermediate charge injection contact, which allows the emission spectrum and intensity of the tandem devices to be seamlessly manipulated. To demonstrate a viable application of this technology, a 4-by-4 pixelated matrix color-tunable display was fabricated.

| S-EPMC6062041 | biostudies-literature

Highly efficient near ultraviolet organic light-emitting diode based on a <i>meta</i>-linked donor-acceptor molecule.

Project description:A novel near ultraviolet (NUV) emitter with a meta-linked donor-acceptor (D-A) structure between triphenylamine (TPA) and phenanthroimidazole (PPI), mTPA-PPI, was designed and synthesized. This molecular design is expected to resolve the conflict between the non-red-shifted emission and the introduction of a charge-transfer (CT) state in the D-A system, aiming at NUV organic light-emitting diodes (OLEDs) with high-efficiency and colour-purity. Theoretical calculations and photophysical experiments were implemented to verify the unique excited state properties of mTPA-PPI. The mTPA-PPI device exhibited excellent NUV electroluminescence (EL) performance with an emission peak at 404 nm, a full width at half maximum (FWHM) of only 47 nm corresponding to a CIE coordinate of (0.161, 0.049), and a maximum external quantum efficiency (EQE) of 3.33%, which is among the best results for NUV OLEDs. This work not only demonstrates the promising potential of mTPA-PPI in NUV OLEDs, but also provides a valuable strategy for the rational design of NUV materials by using the meta-linked D-A architecture.

| S-EPMC5707503 | biostudies-literature

Room-Temperature Multiple Phosphorescence from Functionalized Corannulenes: Temperature Sensing and Afterglow Organic Light-Emitting Diode.

Project description:Corannulene-derived materials have been extensively explored in energy storage and solar cells, however, are rarely documented as emitters in light-emitting sensors and organic light-emitting diodes (OLEDs), due to low exciton utilization. Here, we report a family of multi-donor and acceptor (multi-D-A) motifs, TCzPhCor, TDMACPhCor, and TPXZPhCor, using corannulene as the acceptor and carbazole (Cz), 9,10-dihydro-9,10-dimethylacridine (DMAC), and phenoxazine (PXZ) as the donor, respectively. By decorating corannulene with different donors, multiple phosphorescence is realized. Theoretical and photophysical investigations reveal that TCzPhCor shows room-temperature phosphorescence (RTP) from the lowest-lying T1 ; however, for TDMACPhCor, dual RTP originating from a higher-lying T1 (T1 H ) and a lower-lying T1 (T1 L ) can be observed, while for TPXZPhCor, T1 H -dominated RTP occurs resulting from a stabilized high-energy T1 geometry. Benefiting from the high-temperature sensitivity of TPXZPhCor, high color-resolution temperature sensing is achieved. Besides, due to degenerate S1 and T1 H states of TPXZPhCor, the first corannulene-based solution-processed afterglow OLEDs is investigated. The afterglow OLED with TPXZPhCor shows a maximum external quantum efficiency (EQEmax ) and a luminance (Lmax ) of 3.3 % and 5167 cd m-2 , respectively, which is one of the most efficient afterglow RTP OLEDs reported to date.

| S-EPMC10953377 | biostudies-literature

Low temperature solution process-based defect-induced orange-red light emitting diode.

Project description:We report low-temperature solution-processed p-CuO nanorods (NRs)/n-ZnO NRs heterojunction light emitting diode (LED), exploiting the native point defects of ZnO NRs. ZnO NRs were synthesized at 90 °C by using hydrothermal method while CuO NRs were synthesized at 100 °C by using microwave reaction system. The electrical properties of newly synthesized CuO NRs revealed a promising p-type nature with a hole concentration of 9.64 × 10(18) cm(-3). The current-voltage characteristic of the heterojunction showed a significantly high rectification ratio of 10(5) at 4 V with a stable current flow. A broad orange-red emission was obtained from the forward biased LED with a major peak at 610 nm which was attributed to the electron transition from interstitial zinc to interstitial oxygen point defects in ZnO. A minor shoulder peak was also observed at 710 nm, corresponding to red emission which was ascribed to the transition from conduction band of ZnO to oxygen vacancies in ZnO lattice. This study demonstrates a significant progress toward oxide materials based, defect-induced light emitting device with low-cost, low-temperature methods.

| S-EPMC4673691 | biostudies-literature

3D-printed flexible organic light-emitting diode displays.

Project description:[Figure: see text].

| S-EPMC8741182 | biostudies-literature

Effects of Color Temperature and Brightness on Electroencephalogram Alpha Activity in a Polychromatic Light-emitting Diode.

Project description:ObjectiveIt has been reported that working and learning efficiency might be increased through artificially controlling the color temperature and brightness of light. However, the neurological bases of these outcomes are not well established. Our study was designed to observe whether electroencephalogram (EEG) alpha frequency, as a candidate biological marker, demonstrates significant changes in response to alterations of specific light parameters.MethodsThirty-two healthy subjects performed cognitive tasks under four different polychromatic light conditions: a combination of two different levels of color temperature (2766K vs. 5918K) and brightness (300 lux vs. 600 lux). Spectrum analyses were performed on alpha frequency.ResultsSubjects reported that they felt more pleasant in bright conditions and more relaxed in warm color temperature conditions. Our findings indicate that alpha power increases in warm, low-light and cool, high-light conditions, and there is a significant interaction between color temperature and brightness.ConclusionEEGs might serve as a useful biological marker for further research related to the effects of polychromatic light on cognitive function.

| S-EPMC3897760 | biostudies-literature

Highly-efficient GaN-based light-emitting diode wafers on La 0.3 Sr 1.7 AlTaO6 substrates.

Project description:Highly-efficient GaN-based light-emitting diode (LED) wafers have been grown on La 0.3 Sr 1.7 AlTaO6 (LSAT) substrates by radio-frequency molecular beam epitaxy (RF-MBE) with optimized growth conditions. The structural properties, surface morphologies, and optoelectronic properties of as-prepared GaN-based LED wafers on LSAT substrates have been characterized in detail. The characterizations have revealed that the full-width at half-maximums (FWHMs) for X-ray rocking curves of GaN(0002) and GaN(10-12) are 190.1 and 210.2 arcsec, respectively, indicating that high crystalline quality GaN films have been obtained. The scanning electron microscopy and atomic force microscopy measurements have shown the very smooth p-GaN surface with the surface root-mean-square (RMS) roughness of 1.3 nm. The measurements of low-temperature and room-temperature photoluminescence help to calculate the internal quantum efficiency of 79.0%. The as-grown GaN-based LED wafers have been made into LED chips with the size of 300 × 300 ?m(2) by the standard process. The forward voltage, the light output power and the external quantum efficiency for LED chips are 19.6 W, 2.78 V, and 40.2%, respectively, at a current of 20 mA. These results reveal the high optoelectronic properties of GaN-based LEDs on LSAT substrates. This work brings up a broad future application of GaN-based devices.

| S-EPMC4370033 | biostudies-literature

Multi-spectral imaging with infrared sensitive organic light emitting diode.

Project description:Commercially available near-infrared (IR) imagers are fabricated by integrating expensive epitaxial grown III-V compound semiconductor sensors with Si-based readout integrated circuits (ROIC) by indium bump bonding which significantly increases the fabrication costs of these image sensors. Furthermore, these typical III-V compound semiconductors are not sensitive to the visible region and thus cannot be used for multi-spectral (visible to near-IR) sensing. Here, a low cost infrared (IR) imaging camera is demonstrated with a commercially available digital single-lens reflex (DSLR) camera and an IR sensitive organic light emitting diode (IR-OLED). With an IR-OLED, IR images at a wavelength of 1.2 µm are directly converted to visible images which are then recorded in a Si-CMOS DSLR camera. This multi-spectral imaging system is capable of capturing images at wavelengths in the near-infrared as well as visible regions.

| S-EPMC5380012 | biostudies-literature

Highly efficient blue organic light-emitting diodes based on carbene-metal-amides.

Project description:Carbene-metal-amides are soluble and thermally stable materials which have recently emerged as emitters in high-performance organic light-emitting diodes. Here we synthesise carbene-metal-amide photoemitters with CF3-substituted ligands to show sky-blue to deep-blue photoluminescence from charge-transfer excited states. We demonstrate that the emission colour can be adjusted from blue to yellow and observe that the relative energies of charge transfer and locally excited triplet states influence the performance of the deep-blue emission. High thermal stability and insensitivity to aggregation-induced luminescence quenching allow us to fabricate organic light-emitting diodes in both host-free and host-guest architectures. We report blue devices with a peak external quantum efficiency of 17.3% in a host-free emitting layer and 20.9% in a polar host. Our findings inform the molecular design of the next generation of stable blue carbene-metal-amide emitters.

| S-EPMC7145843 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data