Autonomous UAV System for Cleaning Insulators in Power Line Inspection and Maintenance.
Ontology highlight
ABSTRACT:
SUBMITTER: Lopez Lopez R
PROVIDER: S-EPMC8708355 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Protection of medium voltage (MV) overhead lines against the indirect effects of lightning is an important issue in Malaysia and other tropical countries. Protection of these lines against the indirect effects of lightning is a major concern and can be improved by several ways. The choice of insulator to be used for instance, between the glass, ceramic or polymer, can help to improve the line performance from the perspective of increasing the breakdown strength. In this paper, the electrical performance of a 10 kV polymer insulator under different conditions for impulse, weather and insulator angle with respect to a cross-arm were studied (both experimental and modelling) and the results were discussed accordingly. Results show that the weather and insulator angle (with respect to the cross-arm) are surprisingly influenced the values of breakdown voltage and leakage current for both negative and positive impulses. Therefore, in order to select a proper protection system for MV lines against lightning induced voltage, consideration of the local information concerning the weather and also the insulator angles with respect to the cross-arm are very useful for line stability and performance.
| S-EPMC5325478 | biostudies-literature
Project description:Proper maintenance of the electricity infrastructure requires periodic condition inspections of power line insulators, which can be subjected to various damages such as burns or fractures. The article includes an introduction to the problem of insulator detection and a description of various currently used methods. Afterwards, the authors proposed a new method for the detection of the power line insulators in digital images by applying selected signal analysis and machine learning algorithms. The insulators detected in the images can be further assessed in depth. The data set used in the study consists of images acquired by an Unmanned Aerial Vehicle (UAV) during its overflight along a high-voltage line located on the outskirts of the city of Opole, Opolskie Voivodeship, Poland. In the digital images, the insulators were placed against different backgrounds, for example, sky, clouds, tree branches, elements of power infrastructure (wires, trusses), farmland, bushes, etc. The proposed method is based on colour intensity profile classification on digital images. Firstly, the set of points located on digital images of power line insulators is determined. Subsequently, those points are connected using lines that depict colour intensity profiles. These profiles were transformed using the Periodogram method or Welch method and then classified with Decision Tree, Random Forest or XGBoost algorithms. In the article, the authors described the computational experiments, the obtained results and possible directions for further research. In the best case, the proposed solution achieved satisfactory efficiency (F1 score = 0.99). Promising classification results indicate the possibility of the practical application of the presented method.
| S-EPMC10051827 | biostudies-literature
Project description:A key technology to ensure the safety and accuracy of autonomous driving for future transportation is the cleanliness of the sensor surfaces for accurate signal reading. This study focuses on hydrophobic coatings with self-cleaning performances and UV durability, their possible degradation mechanism of static water contact angle (sWCA), and the effect of the hydrophobic surface on camera image quality. The UV-durable hydrophobic coatings are applied by a spray process followed by a thermal curing. The UV-durable hydrophobic coatings are evaluated on a vision camera under lab-simulated weathering conditions such as rain, mud, fog, and bugs, on samples as-prepared and after various hours of Weather-Ometer® weathering. The results indicate that the sWCA degradation of the UV-durable hydrophobic coatings during accelerated weathering is corresponding to the loss of fluorine (F) atomic percentage in the coatings, and the vision camera imaging quality improves significantly with the UV-durable hydrophobic coatings in comparison to an uncoated surface. The self-cleaning performances of the UV-durable hydrophobic coatings, as measured by two metrics using signal-to-noise ratio and modulation transfer function 50 loss (MTF50loss), linearly correlate with sWCA of the coatings. The UV-durable hydrophobic coatings on the sensor surface will significantly benefit autonomous driving specifically for accurate signal reading under inclement weather.
| S-EPMC10997611 | biostudies-literature
Project description:Within the dental hospital setting, it is a frequent occurrence to find residual cement contaminating instruments in a newly opened kit having undergone the decontamination cycle. Any instrument found to be contaminated then cannot be used, as the area underneath the cement is not sterile. This in itself has several repercussions. These include: cross-contamination, since there is a chance that the cement will be removed and the contaminated instrument used; cost, as each new kit that will be opened due to contaminated instruments will incur decontamination costs; and finally time, which most importantly has an impact on patient experience. Our baseline data recording focussed on finding out the severity of the problem, which instruments were most affected, and how this affected patient treatment, using a questionnaire. Within the paediatric department, 27% of examination kits contained a contaminated instrument, almost one third of all kits used. This quality improvement project utilized a poster and team huddle discussions to raise awareness of the problem and successfully reduced the number of contaminated instrument kits to 7% over a period of four weeks.
| S-EPMC4752716 | biostudies-literature
Project description:This paper presents an algorithm for multi-UAV path planning in scenarios with heterogeneous Global Navigation Satellite Systems (GNSS) coverage. In these environments, cooperative strategies can be effectively exploited when flying in GNSS-challenging conditions, e.g., natural/urban canyons, while the different UAVs can fly as independent systems in the absence of navigation issues (i.e., open sky conditions). These different flight environments are taken into account at path planning level, obtaining a distributed multi-UAV system that autonomously reconfigures itself based on mission needs. Path planning, formulated as a vehicle routing problem, aims at defining smooth and flyable polynomial trajectories, whose time of flight is estimated to guarantee coexistence of different UAVs at the same challenging area. The algorithm is tested in a simulation environment directly derived from a real-world 3D scenario, for variable number of UAVs and waypoints. Its solution and computational cost are compared with optimal planning methods. Results show that the computational burden is almost unaffected by the number of UAVs, and it is compatible with near real time implementation even for a relatively large number of waypoints. The provided solution takes full advantage from the available flight resources, reducing mission time for a given set of waypoints and for increasing UAV number.
| S-EPMC6308699 | biostudies-literature
Project description:The aim of this study is to design an adaptive controller for the hard contact interaction problem of underwater vehicle-manipulator systems (UVMS) to realize asset inspection through physical interaction. The proposed approach consists of a force and position controller in the operational space of the end effector of the robot manipulator mounted on an underwater vehicle. The force tracking algorithm keeps the end effector perpendicular to the unknown surface of the asset and the position tracking algorithm makes it follow a desired trajectory on the surface. The challenging problem in such a system is to maintain the end effector of the manipulator in continuous and stable contact with the unknown surface in the presence of disturbances and reaction forces that constantly move the floating robot base in an unexpected manner. The main contribution of the proposed controller is the development of the adaptive force tracking control algorithm based on switching actions between contact and noncontact states. When the end effector loses contact with the surface, a velocity feed-forward augmented impedance controller is activated to rapidly regain contact interaction by generating a desired position profile whose speed is adjusted depending on the time and the point where the contact was lost. Once the contact interaction is reestablished, a dynamic adaptive damping-based admittance controller is operated for fast adaptation and continuous stable force tracking. To validate the proposed controller, we conducted experiments with a land robotic setup composed of a 6 degrees of freedom (DOF) Stewart Platform imitating an underwater vehicle and a 7 DOF KUKA IIWA robotic arm imitating the underwater robot manipulator attached to the vehicle. The proposed scheme significantly increases the contact time under realistic disturbances, in comparison to our former controllers without an adaptive control scheme. We have demonstrated the superior performance of the current controller with experiments and quantified measures.
| S-EPMC8356049 | biostudies-literature
Project description:The three-dimensional (3D) geometric evaluation of large thermal forging parts online is critical to quality control and energy conservation. However, this online 3D measurement task is extremely challenging for commercially available 3D sensors because of the enormous amount of heat radiation and complexity of the online environment. To this end, an automatic and accurate 3D shape measurement system integrated with a fringe projection-based 3D scanner and an industrial robot is presented. To resist thermal radiation, a double filter set and an intelligent temperature control loop are employed in the system. In addition, a time-division-multiplexing trigger is implemented in the system to accelerate pattern projection and capture, and an improved multi-frequency phase-shifting method is proposed to reduce the number of patterns required for 3D reconstruction. Thus, the 3D measurement efficiency is drastically improved and the exposure to the thermal environment is reduced. To perform data alignment in a complex online environment, a view integration method is used in the system to align non-overlapping 3D data from different views based on the repeatability of the robot motion. Meanwhile, a robust 3D registration algorithm is used to align 3D data accurately in the presence of irrelevant background data. These components and algorithms were evaluated by experiments. The system was deployed in a forging factory on a production line and performed a stable online 3D quality inspection for thermal axles.
| S-EPMC6308438 | biostudies-literature
Project description:Industry 4.0 has paved the way for a world where smart factories will automate and upgrade many processes through the use of some of the latest emerging technologies. One of such technologies is Unmanned Aerial Vehicles (UAVs), which have evolved a great deal in the last years in terms of technology (e.g., control units, sensors, UAV frames) and have significantlyr educed their cost. UAVs can help industry in automatable and tedious tasks, like the ones performed on a regular basis for determining the inventory and for preserving item traceability. In such tasks, especially when it comes from untrusted third parties, it is essential to determine whether the collected information is valid or true. Likewise, ensuring data trustworthiness is a key issue in order to leverage Big Data analytics to supply chain efficiency and effectiveness. In such a case, blockchain, another Industry 4.0 technology that has become very popular in other fields like finance, has the potential to provide a higher level of transparency, security, trust and efficiency in the supply chain and enable the use of smart contracts. Thus, in this paper, we present the design and evaluation of a UAV-based system aimed at automating inventory tasks and keeping the traceability of industrial items attached to Radio-Frequency IDentification (RFID) tags. To confront current shortcomings, such a system is developed under a versatile, modular and scalable architecture aimed to reinforce cyber security and decentralization while fostering external audits and big data analytics. Therefore, the system uses a blockchain and a distributed ledger to store certain inventory data collected by UAVs, validate them, ensure their trustworthiness and make them available to the interested parties. In order to show the performance of the proposed system, different tests were performed in a real industrial warehouse, concluding that the system is able to obtain the inventory data really fast in comparison to traditional manual tasks, while being also able to estimate the position of the items when hovering over them thanks to their tag's signal strength. In addition, the performance of the proposed blockchain-based architecture was evaluated in different scenarios.
| S-EPMC6566655 | biostudies-literature
Project description:The pseudogap refers to an enigmatic state of matter with unusual physical properties found below a characteristic temperature T* in hole-doped high-temperature superconductors. Determining T* is critical for understanding this state. Here we study the simplest model of correlated electron systems, the Hubbard model, with cluster dynamical mean-field theory to find out whether the pseudogap can occur solely because of strong coupling physics and short nonlocal correlations. We find that the pseudogap characteristic temperature T* is a sharp crossover between different dynamical regimes along a line of thermodynamic anomalies that appears above a first-order phase transition, the Widom line. The Widom line emanating from the critical endpoint of a first-order transition is thus the organizing principle for the pseudogap phase diagram of the cuprates. No additional broken symmetry is necessary to explain the phenomenon. Broken symmetry states appear in the pseudogap and not the other way around.
| S-EPMC3409386 | biostudies-literature
