Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nanolasers with Feedback as Low-Coherence Illumination Sources for Speckle-Free Imaging: A Numerical Analysis of the Superthermal Emission Regime.

ABSTRACT: Lasers distinguish themselves for the high coherence and high brightness of their radiation, features which have been exploited both in fundamental research and a broad range of technologies. However, emerging applications in the field of imaging, which can benefit from brightness, directionality and efficiency, are impaired by the speckle noise superimposed onto the picture by the interference of coherent scattered fields. We contribute a novel approach to the longstanding efforts in speckle noise reduction by exploiting a new emission regime typical of nanolasers, where low-coherence laser pulses are spontaneously emitted below the laser threshold. Exploring the dynamic properties of this kind of emission in the presence of optical reinjection we show, through the numerical analysis of a fully stochastic approach, that it is possible to tailor some of the properties of the emitted radiation, in addition to exploiting this naturally existing regime. This investigation, therefore, proposes semiconductor nanolasers as potential attractive, miniaturized and versatile future sources of low-coherence radiation for imaging.

SUBMITTER: Wang T

PROVIDER: S-EPMC8708746 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Speckle illumination SFDI for projector-free optical property mapping.

Project description:Spatial frequency domain imaging can map tissue scattering and absorption properties over a wide field of view, making it useful for clinical applications such as wound assessment and surgical guidance. This technique has previously required the projection of fully characterized illumination patterns. Here, we show that random and unknown speckle illumination can be used to sample the modulation transfer function of tissues at known spatial frequencies, allowing the quantitative mapping of optical properties with simple laser diode illumination. We compute low- and high-spatial frequency response parameters from the local power spectral density for each pixel and use a lookup table to accurately estimate absorption and scattering coefficients in tissue phantoms, in vivo human hand, and ex vivo swine esophagus. Because speckle patterns can be generated over a large depth of field and field of view with simple coherent illumination, this approach may enable optical property mapping in new form-factors and applications, including endoscopy.

| S-EPMC8285059 | biostudies-literature

Speckle illumination holographic non-scanning fluorescence endoscopy.

Project description:Optical sectioning endoscopy such as confocal endoscopy offers capabilities to obtain three-dimensional (3D) information from various biological samples by discriminating between the desired in-focus signals and out-of-focus background. However, in general confocal images are formed through point-by-point scanning and the scanning time is proportional to the 3D space-bandwidth product. Recently, structured illumination endoscopy has been utilized for optically sectioned wide-field imaging, but it still needs axial scanning to acquire images from different depths of focal plane. Here, we report wide-field, multiplane, optical sectioning endoscopic imaging, incorporating 3D active speckle-based illumination and multiplexed volume holographic gratings, to simultaneously obtain images of fluorescently labeled tissue structures from different depths, without the need of scanning. We present the design, and implementation, as well as experimental data, demonstrating this endoscopic system's ability to obtain optically sectioned multiplane fluorescent images of tissue samples, with cellular level resolution in wide-field fashion, and no need for mechanical or optical axial scanning.(A) Schematic drawing of the SIHN endoscopy to simultaneously acquire multiplane images from different depths. (B) Uniform, and (C) SIHN illuminated images of standard fluorescence beads (25 μm in diameter) for the two axial planes. (D) Intensity profile on fluorescently labeled signal (ie, in-focus) and background (ie, out-of-focus) of microspheres.

| S-EPMC6466634 | biostudies-literature

Low spatial coherence electrically pumped semiconductor laser for speckle-free full-field imaging.

Project description:The spatial coherence of laser sources has limited their application to parallel imaging and projection due to coherent artifacts, such as speckle. In contrast, traditional incoherent light sources, such as thermal sources or light emitting diodes (LEDs), provide relatively low power per independent spatial mode. Here, we present a chip-scale, electrically pumped semiconductor laser based on a novel design, demonstrating high power per mode with much lower spatial coherence than conventional laser sources. The laser resonator was fabricated with a chaotic, D-shaped cavity optimized to achieve highly multimode lasing. Lasing occurs simultaneously and independently in ?1,000 modes, and hence the total emission exhibits very low spatial coherence. Speckle-free full-field imaging is demonstrated using the chaotic cavity laser as the illumination source. The power per mode of the sample illumination is several orders of magnitude higher than that of a LED or thermal light source. Such a compact, low-cost source, which combines the low spatial coherence of a LED with the high spectral radiance of a laser, could enable a wide range of high-speed, full-field imaging and projection applications.

| S-EPMC4321308 | biostudies-literature

Speckle-free holography with partially coherent light sources and camera-in-the-loop calibration.

Project description:Computer-generated holography (CGH) holds transformative potential for a wide range of applications, including direct-view, virtual and augmented reality, and automotive display systems. While research on holographic displays has recently made impressive progress, image quality and eye safety of holographic displays are fundamentally limited by the speckle introduced by coherent light sources. Here, we develop an approach to CGH using partially coherent sources. For this purpose, we devise a wave propagation model for partially coherent light that is demonstrated in conjunction with a camera-in-the-loop calibration strategy. We evaluate this algorithm using light-emitting diodes (LEDs) and superluminescent LEDs (SLEDs) and demonstrate improved speckle characteristics of the resulting holograms compared with coherent lasers. SLEDs in particular are demonstrated to be promising light sources for holographic display applications, because of their potential to generate sharp and high-contrast two-dimensional (2D) and 3D images that are bright, eye safe, and almost free of speckle.

| S-EPMC8589315 | biostudies-literature

Superresolution imaging with optical fluctuation using speckle patterns illumination.

Project description:Superresolution fluorescence microscopy possesses an important role for the study of processes in biological cells with subdiffraction resolution. Recently, superresolution methods employing the emission properties of fluorophores have rapidly evolved due to their technical simplicity and direct applicability to existing microscopes. However, the application of these methods has been limited to samples labeled with fluorophores that can exhibit intrinsic emission properties at a restricted timescale, especially stochastic blinking. Here, we present a superresolution method that can be performed using general fluorophores, regardless of this intrinsic property. Utilizing speckle patterns illumination, temporal emission fluctuation of fluorophores is induced and controlled, from which a superresolution image can be obtained exploiting its statistical property. Using this method, we demonstrate, theoretically and experimentally, the capability to produce subdiffraction resolution images. A spatial resolution of 500?nm, 300?nm and 140?nm with 0.4, 0.5 and 1.4 NA objective lenses respectively was achieved in various samples with an enhancement factor of 1.6 compared to conventional fluorescence microscopy.

| S-EPMC4648106 | biostudies-literature

Measuring light transport properties using speckle patterns as structured illumination.

Project description:The measurement of light absorption and scattering properties of biological materials has several diagnostic and therapeutic applications. We can measure these properties for skin without contact using structured illumination and imaging. However, building simple handheld devices remains challenging due to motion artefacts and moving targets. To overcome this limitation, we project random speckle patterns instead of discrete spatial frequencies on the target. Since random patterns are spatially broadband, they capture more information per image, enabling frame-by-frame analysis. In this paper, we describe the statistics of objective speckles and demonstrate how the optical system is designed for spatially bandlimited illumination. Next, we use a diverse set of liquid tissue phantom to validate the method. We successfully demonstrate that a calibrated instrument can independently predict the two primary light transport properties of a homogeneous turbid system. This work is a starting point for analysing skin and other heterogeneous biological media in the future.

| S-EPMC6672017 | biostudies-literature

Point spread function estimation from projected speckle illumination.

Project description:The resolution of an imaging apparatus is ideally limited by the diffraction properties of the light passing through the system aperture, but in many practical cases, inhomogeneities in the light propagating medium or imperfections in the optics degrade the image resolution. Here we introduce a powerful and practical new approach for estimating the point spread function (PSF) of an imaging system on the basis of PSF Estimation from Projected Speckle Illumination (PEPSI). PEPSI uses the fact that the speckles' phase randomness cancels the effects of the aberrations in the illumination path, thereby providing an objective pattern for measuring the deformation of the imaging path. Using this approach, both wide-field-of-view and local-PSF estimation can be obtained by calibration-free, single-speckle-pattern projection. Finally, we demonstrate the feasibility of using PEPSI estimates for resolution improvement in iterative maximum likelihood deconvolution.

| S-EPMC6059898 | biostudies-other

Multiplane HiLo microscopy with speckle illumination and non-local means denoising.

Project description:SignificanceHiLo microscopy synthesizes an optically sectioned image from two images, one obtained with uniform and another with patterned illumination, such as laser speckle. Speckle-based HiLo has the advantage of being robust to aberrations but is susceptible to residual speckle noise that is difficult to control. We present a computational method to reduce this residual noise without undermining resolution. In addition, we improve the versatility of HiLo microscopy by enabling simultaneous multiplane imaging (here nine planes).AimOur goal is to perform fast, high-contrast, multiplane imaging with a conventional camera-based fluorescence microscope.ApproachMultiplane HiLo imaging is achieved with the use of a single camera and z-splitter prism. Speckle noise reduction is based on the application of a non-local means (NLM) denoising method to perform ensemble averaging of speckle grains.ResultsWe demonstrate the capabilities of multiplane HiLo with NLM denoising both with synthesized data and by imaging cardiac and brain activity in zebrafish larvae at 40 Hz frame rates.ConclusionsMultiplane HiLo microscopy aided by NLM denoising provides a simple tool for fast optically sectioned volumetric imaging that can be of general utility for fluorescence imaging applications.

| S-EPMC10704089 | biostudies-literature

Fluorescent microscopy beyond diffraction limits using speckle illumination and joint support recovery.

Project description:Structured illumination microscopy (SIM) breaks the optical diffraction limit by illuminating a sample with a series of line-patterned light. Recently, in order to alleviate the requirement of precise knowledge of illumination patterns, structured illumination microscopy techniques using speckle patterns have been proposed. However, these methods require stringent assumptions of the speckle statistics: for example, speckle patterns should be nearly incoherent or their temporal average should be roughly homogeneous. Here, we present a novel speckle illumination microscopy technique that overcomes the diffraction limit by exploiting the minimal requirement that is common for all the existing super-resolution microscopy, i.e. that the fluorophore locations do not vary during the acquisition time. Using numerical and real experiments, we demonstrate that the proposed method can improve the resolution up to threefold. Because our proposed method succeeds for standard fluorescence probes and experimental protocols, it can be applied in routine biological experiments.

| S-EPMC3691569 | biostudies-literature

An inexpensive programmable illumination microscope with active feedback.

Project description:We have developed a programmable illumination system capable of tracking and illuminating numerous objects simultaneously using only low-cost and reused optical components. The active feedback control software allows for a closed-loop system that tracks and perturbs objects of interest automatically. Our system uses a static stage where the objects of interest are tracked computationally as they move across the field of view allowing for a large number of simultaneous experiments. An algorithmically determined illumination pattern can be applied anywhere in the field of view with simultaneous imaging and perturbation using different colors of light to enable spatially and temporally structured illumination. Our system consists of a consumer projector, camera, 35-mm camera lens, and a small number of other optical and scaffolding components. The entire apparatus can be assembled for under $4,000.

| S-EPMC5026398 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data