Dataset Information

Damage evaluation and precursor of sandstone under the uniaxial compression: Insights from the strain-field heterogeneity.

ABSTRACT: The stress-induced microcrack evolution in rock specimens causes a series of physical changes and heterogeneous deformations. Some of these attributes (such as sound, electricity, heat, etc.) have been effectively used to identify the damage state and precursory information of the rock specimens. However, the strain-field heterogeneity has not been investigated previously. In this study, the relationship of the strain-field heterogeneity and damage evolution of three sandstone specimens under the uniaxial compressive load was analyzed statistically. The acoustic emission (AE) and two-dimensional digital image correlation were employed for real-time evaluation of the AE parameters and strain-field heterogeneity. The results showed that the strain-field heterogeneity was closely related to the rock damage that amplified with the applied stress, and exhibited two features; numerical difference and spatial concentration. Subsequently, these two features were characterized by the two proposed heterogeneous quantitative indicators (i.e., the degree and space heterogeneities). Further, their four transition processes were in agreement with the damage stages confirmed by AE parameters: a relatively constant trend; growth with a relatively constant rate; drastic increase trend; and increase with a high rate to maximum value. Moreover, a time sequence chain for damage precursor was built, where the heterogeneous quantitative indicators and AE parameters differed in sensitivity to microcrack development and can be used as a damage warning at the varying magnitude of the external load.

SUBMITTER: Cheng H

PROVIDER: S-EPMC8716049 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Underground rock masses have shown a general trend of natural balance over billions of years of ground movement. Nonetheless, man-made underground constructions disturb this balance and cause rock stability failure. Fractured rock masses are frequently encountered in underground constructions, and this study aims to restore the strength of rock masses that have experienced considerable fracturing under uniaxial compression. Coal and sandstone from a deep-buried coal mine were chosen as experimental subjects; they were crushed by uniaxial compression and then carefully restored by a chemical adhesive called MEYCO 364 with an innovative self-made device. Finally, the restored specimens were crushed once again by uniaxial compression. Axial stress, axial strain, circumferential strain, and volumetric strain data for the entire process were fully captured and are discussed here. An acoustic emission (AE) testing system was adopted to cooperate with the uniaxial compression system to provide better definitions for crack closure thresholds, crack initiation thresholds, crack damage thresholds, and three-dimensional damage source locations in intact and restored specimens. Several remarkable findings were obtained. The restoration effects of coal are considerably better than those of sandstone because the strength recovery coefficient of the former is 1.20, whereas that of the latter is 0.33, which indicates that MEYCO 364 is particularly valid for fractured rocks whose initial intact peak stress is less than that of MEYCO 364. Secondary cracked traces of restored sandstone almost follow the cracked traces of the initial intact sandstone, and the final failure is mainly caused by decoupling between the adhesive and the rock mass. However, cracked traces of restored coal only partially follow the traces of intact coal, with the final failure of the restored coal being caused by both bonding interface decoupling and self-breakage in coal. Three-dimensional damage source locations manifest such that AE events are highly correlated with a strength recovery coefficient; the AE events show a decreasing tendency when the coefficient is larger than 1, and vice versa. This study provides a feasible scheme for the reinforcement of fractured rock masses in underground constructions and reveals an internal mechanism of the crushing process for restored rock masses, which has certain instructive significance.

Project description:In rocks or rock-like materials, the constituents, e.g. quartz, calcite and biotite, as well as the microdefects have considerably different mechanical properties that make such materials heterogeneous at different degrees. The failure of materials subjected to external loads is a cracking process accompanied with stress redistribution due to material heterogeneity. However, the latter cannot be observed from the experiments in laboratory directly. In this study, the cracking and stress features during uniaxial compression process are numerically studied based on a presented approach. A plastic strain dependent strength model is implemented into the continuous numerical tool-Fast Lagrangian Analysis of Continua in three Dimensions (FLAC3D), and the Gaussian statistical function is adopted to depict the heterogeneity of mechanical parameters including elastic modulus, friction angle, cohesion and tensile strength. The mean parameter μ and the coefficient of variance (hcv, the ratio of mean parameter to standard deviation) in the function are used to define the mean value and heterogeneity degree of the parameters, respectively. The results show that this numerical approach can perfectly capture the general features of brittle materials including fracturing process, AE events as well as stress-strain curves. Furthermore, the local stress disturbance is analyzed and the crack initiation stress threshold is identified based on the AE events process and stress-strain curves. It is shown that the stress concentration always appears in the undamaged elements near the boundary of damaged sites. The peak stress and crack initiation stress are both heterogeneity dependent, i.e., a linear relation exists between the two stress thresholds and hcv. The range of hcv is suggested as 0.12 to 0.21 for most rocks. The stress concentration degree is represented by a stress concentration factor and found also heterogeneity dominant. Finally, it is found that there exists a consistent tendency between the local stress difference and the AE events process.

Dataset Information

Damage evaluation and precursor of sandstone under the uniaxial compression: Insights from the strain-field heterogeneity.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure