Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Defect-Induced Inhomogeneous Phase Transition in 2D Perovskite Single Crystals at Low Temperatures.

ABSTRACT: The temperature-induced phase transition in two-dimensional (2D) layered perovskites was recently found to be incomplete even if the temperature dropped to tens of kelvin. However, its intrinsic cause still remains unclear, and the information on the phase transition in individual single crystals (SCs) is also limited. Herein, we study the phase transition process in individual (n-C₄H₉NH₃)₂PbI₄ SCs using a home-built photoluminescence (PL)-scanned image microscope. At 83 K, the phase transition is indeed incomplete, leading to the coexistence and inhomogeneous distributions of room-temperature and low-temperature phases. We map the distribution of phase transition degree on individual SCs at 83 K, which exhibits a strong positive (negative) correlation with the distribution of local defects (PL lifetimes) at 293 K, indicating that the phase transition is enhanced by initial defects. Our findings might provide new insight into the phase transition of (n-C₄H₉NH₃)₂PbI₄ crystals, which is of potential value for applications based on 2D layered perovskites.

SUBMITTER: Yin Z

PROVIDER: S-EPMC8717364 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ligand assisted growth of perovskite single crystals with low defect density.

Project description:A low defect density in metal halide perovskite single crystals is critical to achieve high performance optoelectronic devices. Here we show the reduction of defect density in perovskite single crystals grown by a ligand-assisted solution process with 3-(decyldimethylammonio)-propane-sulfonate inner salt (DPSI) as an additive. DPSI ligands anchoring with lead ions on perovskite crystal surfaces not only suppress nucleation in solution, but also regulate the addition of proper ions to the growing surface, which greatly enhances the crystal quality. The grown CH3NH3PbI3 crystals show better crystallinity and a 23-fold smaller trap density of 7 × 1010 cm-3 than the optimized control crystals. The enhanced material properties result in significantly suppressed ion migration and superior X-ray detection sensitivity of CH3NH3PbI3 detectors of (2.6 ± 0.4) × 106 µC Gy-1air cm-2 for 60 kVp X-ray and the lowest detectable dose rate reaches (5.0 ± 0.7) nGy s-1, which enables reduced radiation dose to patients in medical X-ray diagnostics.

| S-EPMC7966356 | biostudies-literature

Improved Photostability in Fluorinated 2D Perovskite Single Crystals.

Project description:Hybrid organic-inorganic perovskites are very promising semiconductors for many optoelectronic applications, although their extensive use is limited by their poor stability under environmental conditions. In this work, we synthesize two-dimensional perovskite single crystals and investigate their optical and structural evolution under continuous light irradiation. We found that the hydrophobic nature of the fluorinated component, together with the absence of grain boundary defects, lead to improved material stability thanks to the creation of a robust barrier that preserve the crystalline structure, hindering photo-degradation processes usually promoted by oxygen and moisture.

| S-EPMC7918564 | biostudies-literature

Size-dependent phase transition in methylammonium lead iodide perovskite microplate crystals.

Project description:Methylammonium lead iodide perovskite has attracted considerable recent interest for solution processable solar cells and other optoelectronic applications. The orthorhombic-to-tetragonal phase transition in perovskite can significantly alter its optical, electrical properties and impact the corresponding applications. Here, we report a systematic investigation of the size-dependent orthorhombic-to-tetragonal phase transition using a combined temperature-dependent optical, electrical transport and transmission electron microscopy study. Our studies of individual perovskite microplates with variable thicknesses demonstrate that the phase transition temperature decreases with reducing microplate thickness. The sudden decrease of mobility around phase transition temperature and the presence of hysteresis loops in the temperature-dependent mobility confirm that the orthorhombic-to-tetragonal phase transition is a first-order phase transition. Our findings offer significant fundamental insight on the temperature- and size-dependent structural, optical and charge transport properties of perovskite materials, and can greatly impact future exploration of novel electronic and optoelectronic devices from these materials.

| S-EPMC4844678 | biostudies-literature

Self-trapped state enabled filterless narrowband photodetections in 2D layered perovskite single crystals.

Project description:Filterless narrowband photodetectors can realize color discrimination without filter or bulk spectrometer, thus greatly reducing the system volume and cost for many imaging applications. Charge collection narrowing has been demonstrated to be a successful approach to achieve filterless narrowband photodetections; nevertheless, it sacrifices the sensitivity of the photodetectors. Here we show a highly tunable narrowband photodetector based on two-dimensional perovskite single crystals with high external quantum efficiency (200%), ultralow dark current (10-12 A), and high on-off ratio (103). The spectral response of the narrowband photodetectors can be continuously tuned from red to blue with all full-width at half-maximum < 60 nm and especially < 20 nm in blue wavelength range. The excellent performance can be ascribed to self-trapped states within bandgap and extremely low electrical conductivity in the out-of-plane direction. Our findings open the exciting potential of 2D perovskites for next-generation optoelectronics.

| S-EPMC6379360 | biostudies-other

Phase Transition of Ice at High Pressures and Low Temperatures.

Project description:The behavior of ice under extreme conditions undergoes the change of intermolecular binding patterns and leads to the structural phase transitions, which are needed for modeling the convection and internal structure of the giant planets and moons of the solar system as well as H2O-rich exoplanets. Such extreme conditions limit the structural explorations in laboratory but open a door for the theoretical study. The ice phases IX and XIII are located in the high pressure and low temperature region of the phase diagram. However, to the best of our knowledge, the phase transition boundary between these two phases is still not clear. In this work, based on the second-order Møller-Plesset perturbation (MP2) theory, we theoretically investigate the ice phases IX and XIII and predict their structures, vibrational spectra and Gibbs free energies at various extreme conditions, and for the first time confirm that the phase transition from ice IX to XIII can occur around 0.30 GPa and 154 K. The proposed work, taking into account the many-body electrostatic effect and the dispersion interactions from the first principles, opens up the possibility of completing the ice phase diagram and provides an efficient method to explore new phases of molecular crystals.

| S-EPMC7037513 | biostudies-literature

2D perovskite stabilized phase-pure formamidinium perovskite solar cells.

Project description:Compositional engineering has been used to overcome difficulties in fabricating high-quality phase-pure formamidinium perovskite films together with its ambient instability. However, this comes alongside an undesirable increase in bandgap that sacrifices the device photocurrent. Here we report the fabrication of phase-pure formamidinium-lead tri-iodide perovskite films with excellent optoelectronic quality and stability. Incorporation of 1.67?mol% of 2D phenylethylammonium lead iodide into the precursor solution enables the formation of phase-pure formamidinium perovskite with an order of magnitude enhanced photoluminescence lifetime. The 2D perovskite spontaneously forms at grain boundaries to protect the formamidinium perovskite from moisture and suppress ion migration. A stabilized power conversion efficiency (PCE) of 20.64% (certified stabilized PCE of 19.77%) is achieved with a short-circuit current density exceeding 24?mA?cm-2 and an open-circuit voltage of 1.130?V, corresponding to a loss-in-potential of 0.35?V, and significantly enhanced operational stability.

| S-EPMC6070510 | biostudies-literature

Phase-transition-induced p-n junction in single halide perovskite nanowire.

Project description:Semiconductor p-n junctions are fundamental building blocks for modern optical and electronic devices. The p- and n-type regions are typically created by chemical doping process. Here we show that in the new class of halide perovskite semiconductors, the p-n junctions can be readily induced through a localized thermal-driven phase transition. We demonstrate this p-n junction formation in a single-crystalline halide perovskite CsSnI3 nanowire (NW). This material undergoes a phase transition from a double-chain yellow (Y) phase to an orthorhombic black (B) phase. The formation energies of the cation and anion vacancies in these two phases are significantly different, which leads to n- and p- type electrical characteristics for Y and B phases, respectively. Interface formation between these two phases and directional interface propagation within a single NW are directly observed under cathodoluminescence (CL) microscopy. Current rectification is demonstrated for the p-n junction formed with this localized thermal-driven phase transition.

| S-EPMC6130383 | biostudies-literature

Tetragonal-Cubic Phase Transition and Low-Field Dielectric Properties of CH3NH3PbI3 Crystals.

Project description:The frequency and temperature dependence of dielectric properties of CH3NH3PbI3 (MAPI) crystals have been studied and analyzed in connection with temperature-dependent structural studies. The obtained results bring arguments for the existence of ferroelectricity and aim to complete the current knowledge on the thermally activated conduction mechanisms, in dark equilibrium and in the presence of a small external a.c. electric field. The study correlates the frequency-dispersive dielectric spectra with the conduction mechanisms and their relaxation processes, as well as with the different transport regimes indicated by the Nyquist plots. The different energy barriers revealed by the impedance spectroscopy highlight the dominant transport mechanisms in different frequency and temperature ranges, being associated with the bulk of the grains, their boundaries, and/or the electrodes' interfaces.

| S-EPMC8348982 | biostudies-literature

Softening non-metallic crystals by inhomogeneous elasticity.

Project description:High temperature structural materials must be resistant to cracking and oxidation. However, most oxidation resistant materials are brittle and a significant reduction in their yield stress is required if they are to be resistant to cracking. It is shown, using density functional theory, that if a crystal's unit cell elastically deforms in an inhomogeneous manner, the yield stress is greatly reduced, consistent with observations in layered compounds, such as Ti3SiC2, Nb2Co7, W2B5, Ta2C and Ta4C3. The mechanism by which elastic inhomogeneity reduces the yield stress is explained and the effect demonstrated in a complex metallic alloy, even though the electronegativity differences within the unit cell are less than in the layered compounds. Substantial changes appear possible, suggesting this is a first step in developing a simple way of controlling plastic flow in non-metallic crystals, enabling materials with a greater oxidation resistance and hence a higher temperature capability to be used.

| S-EPMC5599516 | biostudies-literature

Microwave-Assisted Preparation of Organo-Lead Halide Perovskite Single Crystals.

Project description:The efficiency of organo-lead halide perovskite-based optoelectronic devices is dramatically lower for amorphous materials compared to highly crystalline ones. Therefore, it is challenging to optimize and scale up the production of large-sized single crystals of perovskite materials. Here, we describe a novel and original approach to preparing lead halide perovskite single crystals by applying microwave radiation during the crystallization. The microwave radiation primarily causes precise heating control in the whole volume and avoids temperature fluctuations. Moreover, this facile microwave-assisted method of preparation is highly reproducible and fully automated, it and can be applied for various different perovskite structures. In addition, this cost-effective method is expected to be easily scalable because of its versatility and low energy consumption. The crystallization process has low heat losses; therefore, only a low microwave reactor power of 8-15 W during the temperature changes and of less than 1 W during the temperature holding is needed.

| S-EPMC7059302 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data