Dataset Information

SPECT-CT metabolic and morphological study of 2 types of cemented hip stem prostheses in primary total hip arthroplasty patients: A protocol for a randomized controlled clinical trial (SPECT-PROTMA).

ABSTRACT:

Background

Cemented hip arthroplasty requires applying a layer of polymethylmethacrylate (cement) in the space between the bone and the prosthetic stem. This can be achieved using 2 techniques: the thick-layer technique (requires a layer of at least 2 mm to surround an undersized prosthetic stem), and the thin-layer technique (requires a thin layer of cement, so that the prosthetic stem fills the femoral medullary canal). Both approaches have excellent long-term clinical and radiological outcomes, although an implant's insertion into the bone generates inevitable bone mass and bone metabolic changes around it. Combination of single photon emission computed tomography and computed tomography scan (SPECT-CT) imaging combines the single photon emission computed tomography's ability to provide detailed bone metabolism assessment with the computed tomography scan's capacity to provide a meticulous anatomical study.

Methods

This is a single center, open label, randomized clinical trial, performed in the premises of the Bellvitge University Hospital. Participants will be randomly assigned to the Thick-layer technique group (Exeter V40 Cemented Femoral Stem) or to the French paradox technique group (Müller Straight Stem). All participants will have a SPECT-CT scan study at 3, 6, 12, and 24 months after the surgery.

Discussion

Surgical distress itself and the implant's insertion into the bone may cause microvascular changes that alter periprosthetic bone mass and bone metabolism. To the best of our knowledge, there are no studies using SPECT-CT to compare bone metabolism evolution in the postoperative period between these 2 surgical cementation techniques. We aim to provide information in this regard that could help decision making in complicated implant cases and, maybe, pave the way for larger, and methodologically improved studies.

Trial registration

NCT05010733 (August 18, 2021).

SUBMITTER: Rodriguez D

PROVIDER: S-EPMC8718198 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Background and purpose - The use of cementless total hip arthroplasty (THA) in elderly patients is debated because of increased risk of early periprosthetic femoral fractures. However, cemented femoral components carry a risk of bone cement implantation syndrome. Hence, we compared in-hospital complications, complications leading to readmission and mortality ≤ 30 days postoperatively between hybrid/cemented (cemented femoral component) vs. cementless THA in osteoarthritis patients > 70 years.Patients and methods - This is a prospective observational cohort study in 9 centers from January 2010 to August 2017. We used 30-day follow-up from the Danish National Patient Registry, patient records, and data from the Danish Hip Arthroplasty Register. Only THAs performed as a result of osteoarthritis were included.Results - 3,368 (42%) of the THAs were cemented/hybrid and 4,728 (58%) cementless. The in-hospital complication risk was 7.7% after cemented/hybrid vs. 5.3% after cementless THA (< 0.001), statistically not significant when adjusting for comorbidities (p = 0.1). There were similar risks of complications causing readmission (5.7% vs. 6.2%) and mortality ≤ 30 days (0.2% vs. 0.3%). 15 cases (0.4%) of pulmonary embolism (PE) were found after cemented/hybrid vs. 4 (0.1%) after cementless THA (p = 0.001); none occurred within 24 hours postoperatively. 2 of the PEs after cementless THA led to mortality. Cemented/hybrid THA remained significantly associated with risk of PE (RR 3.9, p = 0.02), when adjusting for comorbidities. BMI > 35 was associated with highest risk of PE (RR 5.7, p = 0.003). The risk of periprosthetic femoral fracture was 0.2% after cemented/hybrid vs. 1.5% after cementless THA (p < 0.001) and the risk of dislocations was 1.2% after cemented/hybrid THA vs. 1.8% after cementless THA (p = 0.04).Interpretation - The higher risk of PE after cemented/hybrid THA and higher risk of periprosthetic femoral fractures and dislocations after cementless THA highlights that both medically and surgically complications are related to fixation technique and have to be considered.

Project description:PurposeTo evaluate the influence of different scan parameters for single-energy CT and dual-energy CT, as well as the impact of different material used in a TKA prosthesis on image quality and the extent of metal artifacts.MethodsEight pairs of TKA prostheses from different vendors were examined in a phantom set-up. Each pair consisted of a conventional CoCr prosthesis and the corresponding anti-allergic prosthesis (full titanium, ceramic, or ceramic-coated) from the same vendor. Nine different (seven dual-energy CT and two single-energy CT) scan protocols with different characteristics were used to determine the most suitable CT protocol for TKA imaging. Quantitative image analysis included assessment of blooming artifacts (metal implants appear thicker on CT than they are, given as virtual growth in mm in this paper) and streak artifacts (thick dark lines around metal). Qualitative image analysis was used to investigate the bone-prosthesis interface.ResultsThe full titanium prosthesis and full ceramic knee showed significantly fewer blooming artifacts compared to the standard CoCr prosthesis (mean virtual growth 0.6-2.2 mm compared to 2.9-4.6 mm, p?<?0.001). Dual-energy CT protocols showed less blooming (range 3.3-3.8 mm) compared to single-energy protocols (4.6-5.5 mm). The full titanium and full ceramic prostheses showed significantly fewer streak artifacts (mean standard deviation 77-86 Hounsfield unit (HU)) compared to the standard CoCr prosthesis (277-334 HU, p?<?0.001). All dual-energy CT protocols had fewer metal streak artifacts (215-296 HU compared to single-energy CT protocols (392-497 HU)). Full titanium and ceramic prostheses were ranked superior with regard to the image quality at the bone/prosthesis interface compared to a standard CoCr prosthesis, and all dual-energy CT protocols were ranked better than single-energy protocols.ConclusionsDual-energy CT and ceramic or titanium prostheses reduce CT artifacts and provide superior image quality of total knee arthroplasty at the bone/prosthesis interface. These findings support the use of dual-energy CT as a solid imaging base for clinical decision-making and the use of full-titanium or ceramic prostheses to allow for better CT visualization of the bone-prosthesis interface.

Project description:PurposeThe diagnostic process in patients after painful total knee arthroplasty (TKA) is challenging. The more clinical and radiological information about a patient with pain after TKA is included in the assessment, the more reliable and sustainable the advice regarding TKA revision can be. The primary aim was to investigate the position of TKA components and evaluate bone tracer uptake (BTU) using pre-revision SPECT/CT and correlate these findings with previously published pain patterns in painful patients after TKA.MethodsA prospectively collected cohort of 83 painful primary TKA patients was retrospectively evaluated. All patients followed a standardized diagnostic algorithm including 99m-Tc-HDP-SPECT/CT, which led to a diagnosis indicating revision surgery. Pain character, location, dynamics and radiation were systematically assessed as well as TKA component position in 3D-CT. BTU was anatomically localized and quantified using a validated localization scheme. Component positioning and BTU were correlated with pain characteristics using non-parametric Spearman correlations (p < 0.05).ResultsBased on Spearman's rho, significant correlations were found between pain and patients characteristics and SPECT/CT findings resulting in nine specific patterns. The most outstanding ones include: Pattern 1: More flexion in the femoral component correlated with tender/splitting pain and patella-related pathologies. Pattern 3: More varus in the femoral component correlated with dull/heavy and tingling/stinging pain during descending stairs, unloading and long sitting in patients with high BMI and unresurfaced patella. Pattern 6: More posterior slope in the tibial component correlated with constant pain.ConclusionThe results of this study help to place component positioning in the overall context of the "painful knee arthroplasty" including specific pain patterns. The findings further differentiate the clinical picture of a painful TKA. Knowing these patterns enables a prediction of the cause of the pain to be made as early as possible in the diagnostic process before the state of pain becomes chronic.Level of evidenceLevel III.