Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Condensation of water vapor from humid air inside vertical channels formed by flat plates.

ABSTRACT: Condensation of humid air is an important process in thermal and process engineering and a subject of many currently research-intensive scientific domains, such as atmospheric water harvesting and seawater desalination. The nature of (water) vapor condensation in the presence of non-condensable gas (NCG) such as air differs significantly from the case with the pure, quiescent vapor condensation. In the literature, simple models that describe the forced flow condensation of water vapor in the presence of air on a series of vertical flat plates are hard to find. Here we present a simple and computationally efficient semi-empirical correlation describing forced flow condensation from humid air inside vertical channels formed by flat plates. The correlation accounts air as a non-condensing gas, different heights of vertical plates, and different thermal-hydraulic parameters. The correlation has been experimentally validated and shows excellent agreement, as 90% of theoretically predicted values are within ±12% of experimental data.

SUBMITTER: Poredos P

PROVIDER: S-EPMC8724959 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Continuous droplet removal upon dropwise condensation of humid air on a hydrophobic micropatterned surface.

Project description:Combination of two physical phenomena, capillary pressure gradient and wettability gradient, allows a simple two-step fabrication process that yields a reliable hydrophobic self-cleaning condenser surface. The surface is fabricated with specific microscopic topography and further treatment with a chemically inert low-surface-energy material. This process does not require growth of nanofeatures (nanotubes) or hydrophilic-hydrophobic patterning of the surface. Trapezoidal geometry of the microfeatures facilitates droplet transfer from the Wenzel to the Cassie state and reduces droplet critical diameter. The geometry of the micropatterns enhances local coalescence and directional movement for droplets with diameter much smaller than the radial length of the micropatterns. The hydrophobic self-cleaning micropatterned condenser surface prevents liquid film formation and promotes continuous dropwise condensation cycle. Upon dropwise condensation, droplets follow a designed wettability gradient created with micropatterns from the most hydrophobic to the least hydrophobic end of the surface. The surface has higher condensation efficiency, due to its directional self-cleaning property, than a plain hydrophobic surface. We explain the self-actuated droplet collection mechanism on the condenser surface and demonstrate experimentally the creation of an effective wettability gradient over a 6 mm radial distance. In spite of its fabrication simplicity, the fabricated surface demonstrates self-cleaning property, enhanced condensation performance, and reliability over time. Our work enables creation of a hydrophobic condenser surface with the directional self-cleaning property that can be used for collection of biological (chemical, environmental) aerosol samples or for condensation enhancement.

| S-EPMC4148149 | biostudies-literature

Vapor condensation with daytime radiative cooling.

Project description:A radiative vapor condenser sheds heat in the form of infrared radiation and cools itself to below the ambient air temperature to produce liquid water from vapor. This effect has been known for centuries, and is exploited by some insects to survive in dry deserts. Humans have also been using radiative condensation for dew collection. However, all existing radiative vapor condensers must operate during the nighttime. Here, we develop daytime radiative condensers that continue to operate 24 h a day. These daytime radiative condensers can produce water from vapor under direct sunlight, without active consumption of energy. Combined with traditional passive cooling via convection and conduction, radiative cooling can substantially increase the performance of passive vapor condensation, which can be used for passive water extraction and purification technologies.

| S-EPMC8040807 | biostudies-literature

Vertical tearing of subducting plates controlled by geometry and rheology of oceanic plates.

Project description:Lateral non-uniform subduction is impacted by continuous plate segmentation owing to vertical tearing of the subducting plate. However, the dynamics and physical controls of vertical tearing remain controversial. Here, we employed 3D numerical models to investigate the effects of trench geometry (offset by a transform boundary) and plate rheology (plate age and the magnitude of brittle/plastic strain weakening) on the evolution of shear stress-controlled vertical tearing within a homogenous subducting oceanic plate. Numerical results suggest that the trench offset geometry could result in self-sustained vertical tearing as a narrow shear zone within the intact subducting oceanic plate, and that this process of tearing could operate throughout the entire subduction process. Further, the critical trench offset length for the maturation of vertical tearing is impacted by plate rheology. Comparison between numerical modelling results and natural observations suggests that vertical tearing attributed to trench offset geometry is broadly developed in modern subduction and collision systems worldwide.

| S-EPMC10692197 | biostudies-literature

Continuous Synthesis of Nanoscale Emulsions by Vapor Condensation (EVC).

Project description:Emulsions are widely used in many industrial applications, and the development of efficient techniques for synthesizing them is a subject of ongoing research. Vapor condensation is a promising method for energy-efficient, high-throughput production of monodisperse nanoscale emulsions. However, previous studies using this technique are limited to producing small volumes of water-in-oil dispersions. In this work, a new method for the continuous synthesis of nanoscale emulsions (water-in-oil and oil-in-water) is presented by condensing vapor on free-flowing surfactant solutions. The viability of oil vaporization and condensation is demonstrated under mild heating/cooling using diverse esters, terpenes, aromatic hydrocarbons, and alkanes. By systematically investigating water vapor and oil vapor condensation dynamics on bulk liquid-surfactant solutions, a rich diversity of outcomes, including floating films, nanoscale drops, and hexagonally packed microdrops is uncovered. It is demonstrated that surfactant concentration impacts oil spreading, self-emulsification, and such behavior can aid in the emulsification of condensed oil drops. This work represents a critical step toward advancing the vapor condensation method's applications for emulsions and colloidal systems, with broad implications for various fields and the development of new emulsion-based products and industrial processes.

| S-EPMC11022740 | biostudies-literature

Degrafting of Polymer Brushes by Exposure to Humid Air.

Project description:It is well-known that polymer brushes can degraft in aqueous liquids. Here we show that brushes can deteriorate in humid air too. We observe that the detachment rate of the brushes increases with increasing relative humidity and hydrophilicity of the brushes. We relate this to the increase in water absorption as these parameters are increased. Our results imply that protective measures that are at present being developed for applications of brushes in liquids will also be key in enabling the long-term storage and utilization of hydrophilic brushes in air.

| S-EPMC8192051 | biostudies-literature

Sub-micrometer dropwise condensation under superheated and rarefied vapor condition.

Project description:Phase change accompanying conversion of a saturated or superheated vapor in the presence of subcooled surfaces is one of the most common occurring phenomena in nature. The mode of phase change that follows such a transformation is dependent upon surface properties such as contact angle and thermodynamic conditions of the system. In present studies, an experimental approach is used to study the physics behind droplet growth on a partially wet surface. Superheated vapor at low pressures of 4-5 Torr was condensed on subcooled silicon surface with a static contact angle of 60° in the absence of noncondensable gases, and the condensation process was monitored using environmental scanning electron microscopy (ESEM) with sub-microscopic spatial resolution. The condensation process was analyzed in the form of size growth of isolated droplets before a coalescence event ended the regime of single droplet growth. Droplet growth obtained as a function of time reveals that the rate of growth decreases as the droplet increases in size. This behavior is indicative of an overall droplet growth law existing over larger time scales for which the current observations in their brief time intervals could be fitted. A theoretical model based on kinetic theory further support the experimental observations indicating a mechanism where growth occurs by interfacial mass transport directly on condensing droplet surface. Evidence was also found that establishes the presence of sub-microscopic droplets nucleating and growing between microscopic droplets for the partially wetting case.

| S-EPMC2978260 | biostudies-literature

Microscale 3D collagen cell culture assays in conventional flat-bottom 384-well plates.

Project description:Three-dimensional (3D) culture systems such as cell-laden hydrogels are superior to standard two-dimensional (2D) monolayer cultures for many drug-screening applications. However, their adoption into high-throughput screening (HTS) has been lagging, in part because of the difficulty of incorporating these culture formats into existing robotic liquid handling and imaging infrastructures. Dispensing cell-laden prepolymer solutions into 2D well plates is a potential solution but typically requires large volumes of reagents to avoid evaporation during polymerization, which (1) increases costs, (2) makes drug penetration variable and (3) complicates imaging. Here we describe a technique to efficiently produce 3D microgels using automated liquid-handling systems and standard, nonpatterned, flat-bottomed, 384-well plates. Sub-millimeter-diameter, cell-laden collagen gels are deposited on the bottom of a ~2.5 mm diameter microwell with no concerns about evaporation or meniscus effects at the edges of wells, using aqueous two-phase system patterning. The microscale cell-laden collagen-gel constructs are readily imaged and readily penetrated by drugs. The cytotoxicity of chemotherapeutics was monitored by bioluminescence and demonstrated that 3D cultures confer chemoresistance as compared with similar 2D cultures. Hence, these data demonstrate the importance of culturing cells in 3D to obtain realistic cellular responses. Overall, this system provides a simple and inexpensive method for integrating 3D culture capability into existing HTS infrastructure.

| S-EPMC4478447 | biostudies-literature

Thin single-wall BN-nanotubes formed inside carbon nanotubes.

Project description:We report a high yield synthesis of single-wall boron nitride nanotubes (SWBNNTs) inside single-wall carbon nanotubes (SWCNTs), a nano-templated reaction, using ammonia borane complexes (ABC) as a precursor. Transmission electron microscope (TEM), high angle annular dark field (HAADF)-scanning TEM (STEM), electron energy loss spectra (EELS) and high resolution EELS mapping using aberration-corrected TEM system clearly show the formation of thin SWBNNTs inside SWCNTs. We have found that the yield of the SWBNNT formation is high and that the most of ABC molecules decompose and fuse to form the thin BNNTs at a temperature of 1,673 K having a narrow diameter distribution of 0.7 ± 0.1 nm. Optical absorption measurements suggest that the band gap of the thin SWBNNTs is about 6.0 eV, which provide the ideal insulator nanotubes with very small diameters.

| S-EPMC3587887 | biostudies-literature

The effect of surface wettability on water vapor condensation in nanoscale.

Project description:The effect of surface wettability on condensation heat transfer in a nanochannel is studied with the molecular dynamics simulations. Different from the conventional size, the results show that the filmwise mode leads to more efficient heat transfer than the dropwise mode, which is attributed to a lower interfacial thermal resistance between the hydrophilic surface and the condensed water compared with the hydrophobic case. The observed temperature jump at the solid-liquid surface confirms that the hydrophilic properties of the solid surface can suppress the interfacial thermal resistance and improve the condensation heat transfer performance effectively.

| S-EPMC4709718 | biostudies-other

Alternative All-Inside Technique of Repairing a Vertical Meniscus Tear.

Project description:Lateral meniscus vertical tears are often seen with acute anterior cruciate ligament injuries. The inside-out technique of repairing the meniscal tear is currently the gold standard treatment. However, every technique has its own drawbacks. The inside-out technique has possible risk of infection and neurovascular complications. All-inside techniques are becoming increasingly popular. A novel all-inside technique and a variation of it for meniscus repair using an antegrade suture passer like a Knee Scorpion are described. These are cost effective using a 2-0 FiberWire for repair of vertical meniscal tears. This technique also provides a better control of reduction at tear site through tensioning the 2 suture limbs. It is cost effective, easy to use, and has less neurovascular complications as compared with the inside -out technique.

| S-EPMC7451433 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data