Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Based On Confined Polymerization: In Situ Synthesis of PANI/PEEK Composite Film in One-Step.

ABSTRACT: Confined polymerization is an effective method for precise synthesis, which can further control the micro-nano structure inside the composite material. Polyaniline (PANI)-based composites are usually prepared by blending and original growth methods. However, due to the strong rigidity and hydrogen bonding of PANI, the content of PANI composites is low and easy to agglomerate. Here, based on confined polymerization, it is reported that polyaniline /polyether ether ketone (PANI/PEEK) film with high PANI content is synthesized in situ by a one-step method. The micro-nano structure of the two polymers in the confined space is further explored and it is found that PANI grows in the free volume of the PEEK chain, making the arrangement of the PEEK chain more orderly. Under the best experimental conditions, the prepared 16 µm-PANI/PEEK film has a dielectric constant of 205.4 (dielectric loss 0.401), the 75 µm-PANI/PEEK film has a conductivity of 3.01×10^-4 S m^-1 . The prepared PANI/PEEK composite film can be further used as electronic packaging materials, conductive materials, and other fields, which has potential application prospects in anti-static, electromagnetic shielding materials, corrosion resistance, and other fields.

SUBMITTER: Lin Z

PROVIDER: S-EPMC8728828 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Synthesis Antifreezing and Antidehydration Organohydrogels: One-Step In-Situ Gelling versus Two-Step Solvent Displacement.

Project description:Organohydrogels with distinct antifreezing and antidehydration properties have aroused great interest among researchers, and various organohydrogels and organohydrogel-based applications have emerged recently. There are two popular synthesis strategies to prepare these antifreezing and antidehydration organohydrogels: the in-situ gelling and the solvent displacement strategies. Although both strategies have been widely applied, there is a lack of comparative study of these two strategies. In this work, to elucidate the comparative advantages of the two synthesis strategies, we studied and compared the mechanical and environmental tolerant properties of the organohydrogels synthesized from both strategies. The glycerol-based and ethylene glycol-based chemical polyacrylamide (PAAm) organohydrogel and the glycerol-based physical gelatin organohydrogel were synthesized and studied. Through the comparative study, we have found that the organohydrogels from different strategies with the same dispersion medium showed similar antifreezing and antidehydration properties but different mechanical properties. The mechanical properties of these organohydrogels are influenced by two opposite factors for each strategy: the enhanced physical interactions induced strengthening and solvent effect or swelling induced weakening. We hope this study may provide a better understanding of the synthesis strategies of organohydrogels and provide a valuable guide to choose the suitable synthesis strategy for each application.

| S-EPMC7696091 | biostudies-literature

One-Step Synthesis of Eu3+-Modified Cellulose Acetate Film and Light Conversion Mechanism.

Project description:A CA-Eu(III) complex was synthesized by the coordination reaction of cellulose acetate (CA) and Eu3+ to obtain a CA-Eu light conversion film. This product was then doped with Tb(III) to sensitize the luminescence of Eu3+, which could functionalize the CA film. FTIR and XPS showed that the oxygen atoms in C=O, C-O (O=C-O), and O-H were involved in the complexation with Eu3+ and formed a Eu-O bond. SEM revealed that Eu3+ filled in the pores of the CA film. By changing the experimental conditions, the best fluorescence performance was obtained at the CA: Eu3+ ratio of 3:1 with a reaction time of 65 min. The energy transfer between Tb3+-Eu3+ could be realized by doping Tb3+ to enhance the luminescence of Eu3+. The best fluorescence performance of the CA-Eu-Tb light conversion film was at a Eu3+:Tb3+ ratio of 3:1. Compared with the CA film, the light conversion film has high transparency, high tensile strength, and good flexibility. It can convert the ultraviolet light harmful to plants into red light that is beneficial to photosynthesis. This offers high efficiency and environmental protection in the field of agricultural films.

| S-EPMC7795846 | biostudies-literature

One Step In-Situ Synthesis of Zinc Oxide Nanoparticles for Multifunctional Cotton Fabrics.

Project description:Zinc oxide nanoparticles (ZnO NPs) have acquired great significance in the textile sector due to their impressive efficiency and multifold utilization, such as antimicrobials, UV protection, photo catalytic activity, and self-cleaning. The aim of this work is in-situ growth of ZnO NPs on 100% cotton fabrics with the one-step hydrothermal method for preparation of multifunctional textile with UV protecting, antibacterial, and photo catalytic properties. Sodium hydroxide (NaOH) and Zinc nitrate hexahydrate [Zn(NO3)2·6H2O] were used as reactants for the growth of zinc oxide on the 100% cotton fabrics. The loaded amount of Zn contents on the cotton fabric was determined by using induced coupled plasma atomic emission spectroscopy (ICP-AES). The surface morphological characterization of deposited ZnO NPs was examined, employing scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and, Fourier- transform infrared spectroscopy (FTIR). The characterization results showed the presence of ZnO NPs on cotton fabrics having hexagonal wurtzite crystalline structure. The synthesized ZnO NPs on fabrics exhibited promising results for antibacterial, UV protection, and photo catalytic performance.

| S-EPMC8304503 | biostudies-literature

In-situ one-step hydrothermal synthesis of a lead germanate-graphene composite as a novel anode material for lithium-ion batteries.

Project description:Lead germanate-graphene nanosheets (PbGeO3-GNS) composites have been prepared by an efficient one-step, in-situ hydrothermal method and were used as anode materials for Li-ion batteries (LIBs). The PbGeO3 nanowires, around 100-200 nm in diameter, are highly encapsulated in a graphene matrix. The lithiation and de-lithiation reaction mechanisms of the PbGeO3 anode during the charge-discharge processes have been investigated by X-ray diffraction and electrochemical characterization. Compared with pure PbGeO3 anode, dramatic improvements in the electrochemical performance of the composite anodes have been obtained. In the voltage window of 0.01-1.50 V, the composite anode with 20 wt.% GNS delivers a discharge capacity of 607 mAh g(-1) at 100 mA g(-1) after 50 cycles. Even at a high current density of 1600 mA g(-1), a capacity of 406 mAh g(-1) can be achieved. Therefore, the PbGeO3-GNS composite can be considered as a potential anode material for lithium ion batteries.

| S-EPMC4229670 | biostudies-other

Highly efficient one-pot/one-step synthesis of multiblock copolymers from three-component polymerization of carbon dioxide, epoxide and lactone.

Project description:It is a long-standing challenge to combine mixed monomers into multiblock copolymer (MBC) in a one-pot/one-step polymerization manner. We report the first example of MBC with biodegradable polycarbonate and polyester blocks that were synthesized from highly efficient one-pot/one-step polymerization of cyclohexene oxide (CHO), CO2 and ?-caprolactone (?-CL) in the presence of zinc-cobalt double metal cyanide complex and stannous octoate. In this protocol, two cross-chain exchange reactions (CCER) occurred at dual catalysts respectively and connected two independent chain propagation procedures (i.e., polycarbonate formation and polyester formation) simultaneously in a block-by-block manner, affording MBC without tapering structure. The multiblock structure of MBC was determined by the rate ratio of CCER to the two chain propagations and could be simply tuned by various kinetic factors. This protocol is also of significance due to partial utilization of renewable CO2 and improved mechanical properties of the resultant MBC.

| S-EPMC5811072 | biostudies-literature

In Situ Polymerization of Linseed Oil-Based Composite Film: Enhancement of Mechanical and Water Barrier Properties by the Incorporation of Cinnamaldehyde and Organoclay.

Project description:Linseed oil-based composite films were prepared with cinnamaldehyde (Cin) using a modified clay (organoclay) through in situ polymerization, which is the result of the interaction between Cin and organoclay. The incorporation of organoclay reduces the polymer chain's mobility and, therefore, increases the thermal stability of the composite films. In some experimental conditions, the clay is located both inside and on the surface of the film, thus, affecting the mechanical and thermal properties as well as the surface properties of the composite films. The incorporation of organoclay decreases the water contact angle of the composite film by more than 15%, whatever the amount of cinnamaldehyde. However, the incorporation of cinnamaldehyde has the opposite effect on film surface properties. Indeed, for the water vapor permeability (WVP), the effect of cinnamaldehyde on the film barrier properties is much higher in the presence of organoclay. The incorporation of hydrophobic compounds into the polymer films reduces the water content, which acts as a plasticizer and, therefore, decreases the WVP by more than 17%. Linseed oil has a natural antioxidant activity (~97%) due to the higher content of unsaturated fatty acids, and this activity increased with the amount of organoclay and cinnamaldehyde.

| S-EPMC9699561 | biostudies-literature

Facile One-Step Hydrothermal Synthesis of the rGO@Ni3V2O8 Interconnected Hollow Microspheres Composite for Lithium-Ion Batteries.

Project description:Low-cost, vanadium-based mixed metal oxides mostly have a layered crystal structure with excellent kinetics for lithium-ion batteries, providing high energy density. The existence of multiple oxidation states and the coordination chemistry of vanadium require cost-effective, robust techniques to synthesize the scaling up of their morphology and surface properties. Hydrothermal synthesis is one of the most suitable techniques to achieve pure phase and multiple morphologies under various conditions of temperature and pressure. We attained a simple one-step hydrothermal approach to synthesize the reduced graphene oxide coated Nickel Vanadate (rGO@Ni3V2O8) composite with interconnected hollow microspheres. The self-assembly route produced microspheres, which were interconnected under hydrothermal treatment. Cyclic performance determined the initial discharge/charge capacities of 1209.76/839.85 mAh g-1 at the current density of 200 mA g-1 with a columbic efficiency of 69.42%, which improved to 99.64% after 100 cycles. High electrochemical performance was observed due to high surface area, the porous nature of the interconnected hollow microspheres, and rGO induction. These properties increased the contact area between electrode and electrolyte, the active surface of the electrodes, and enhanced electrolyte penetration, which improved Li-ion diffusivity and electronic conductivity.

| S-EPMC7760731 | biostudies-literature

One-step Synthesis of Ordered Pd@TiO2 Nanofibers Array Film as Outstanding NH3 Gas Sensor at Room Temperature.

Project description:The one dimensional (1D) ordered porous Pd@TiO2 nanofibers (NFs) array film have been fabricated via a facile one-step synthesis of the electrospinning approach. The Pd@TiO2 NFs (PTND3) contained Pd (2.0 wt %) and C, N element (16.2 wt %) display high dispersion of Pd nanoparticles (NPs) on TiO2 NFs. Adding Pd meshed with C, N element to TiO2 based NFs might contribute to generation of Lewis acid sites and Brønsted acid sites, which have been recently shown to enhance NH3 adsorption-desorption ability; Pd NPs could increase the quantity of adsorbed O2 on the surface of TiO2 based NFs, and accelerated the O2 molecule-ion conversion rate, enhanced the ability of electron transmission. The response time of PTND3 sensor towards 100 ppm NH3 is only 3 s at room temperature (RT). Meantime, the response and response time of the PTND3 to the NH3 is 1 and 14s even at the concentration of 100 ppb. Therefore, the ordered Pd@TiO2 NFs array NH3 sensor display great potential for practical applications.

| S-EPMC5677023 | biostudies-literature

Charge tunable thin-film composite membranes by gamma-ray triggered surface polymerization.

Project description:Thin-film composite poly(amide) (PA) membranes have greatly diversified water supplies and food products. However, users would benefit from a control of the electrostatic interactions between the liquid and the net surface charge interface in order to benefit wider application. The ionic selectivity of the 100?nm PA semi-permeable layer is significantly affected by the pH of the solution. In this work, for the first time, a convenient route is presented to configure the surface charge of PA membranes by gamma ray induced surface grafting. This rapid and up-scalable method offers a versatile route for surface grafting by adjusting the irradiation total dose and the monomer concentration. Specifically, thin coatings obtained at low irradiation doses between 1 and 10 kGy and at low monomer concentration of 1?v/v% in methanol/water (1:1) solutions, dramatically altered the net surface charge of the pristine membranes from -25 mV to +45?mV, whilst the isoelectric point of the materials shifted from pH 3 to pH 7. This modification resulted in an improved water flux by over 55%, from 45.9 to up 70?L.m-2.h-1, whilst NaCl rejection was found to drop by only 1% compared to pristine membranes.

| S-EPMC5493691 | biostudies-other

One-Step Synthesis Heterostructured g-C?N?/TiO? Composite for Rapid Degradation of Pollutants in Utilizing Visible Light.

Project description:To meet the urgent need of society for advanced photocatalytic materials, novel visible light driven heterostructured composite was constructed based on graphitic carbon nitride (g-C?N?) and fibrous TiO?. The g-C?N?/TiO? (CNT) composite was prepared through electrospinning technology and followed calcination process. The state of the g-C?N? and fibrous TiO? was tightly coupled. The photocatalytic performance was measured by degrading the Rhodamine B. Compared to commercial TiO? (P25®) and electrospun TiO? nanofibers, the photocatalytic performance of CNT composite was higher than them. The formation of CNT heterostructures and the enlarged specific surface area enhanced the photocatalytic performance, suppressing the recombination rate of photogenerated carriers while broadening the absorption range of light spectrum. Our studies have demonstrated that heterostructured CNT composite with an appropriate proportion can rational use of visible light and can significantly promote the photogenerated charges transferred at the contact interface between g-C?N? and TiO?.

| S-EPMC6215260 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data