Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Simple Colorimetric Assay for Sensitive Cu²⁺ Detection Based on the Glutathione-Mediated Etching of MnO₂ Nanosheets.

ABSTRACT: In this paper, we developed a quick, economical and sensitive colorimetric strategy for copper ions (Cu²⁺) quantification via the redox response of MnO₂ nanosheets with glutathione (GSH). This reaction consumed MnO₂ nanosheets, which acted as a catalyst for the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB). In the presence of Cu²⁺, the GSH was catalyzed to GSSG (oxidized glutathione), and the solution changed from colorless to deep blue. Under the optimum conditions, the absorption signal of the oxidized product (oxTMB) became proportional to Cu²⁺ concentration in the range from 10 to 300 nM with a detection limit of 6.9 nM. This detection system showed high specificity for Cu²⁺. Moreover, the system has been efficaciously implemented for Cu²⁺ detection in actual tap water samples. The layered-nanostructures of MnO₂ nanosheets make it possess high chemical and thermal stability. TMB can be quickly oxidized within 10 min by the catalyzing of MnO₂ nanosheets with high oxidase-like activity. There is no need of expensive reagents, additional H₂O₂ and complicated modification processes during the colorimetric assay. Therefore, the strategy primarily based on MnO₂ nanosheets is promising for real-time, rapid and highly sensitive detection of Cu²⁺ under practical conditions.

SUBMITTER: Tang S

PROVIDER: S-EPMC8739952 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

An ultrasensitive colorimetric and fluorescence dual-readout assay for glutathione with a carbon dot-MnO2 nanosheet platform based on the inner filter effect.

Project description:An ultrasensitive colorimetric and fluorescence dual-readout assay based on the inner filter effect (IFE) was developed for glutathione (GSH) determination, in which carbon dots (C-dots) were used as a fluorophore and MnO2 nanosheets as an absorber. Due to the excellent optical absorption properties of MnO2 nanosheets and the good spectral overlap between the fluorophore and absorber, MnO2 nanosheets could effectively quench the fluorescence of C-dots via the IFE. As the target, GSH could reduce MnO2 nanosheets to Mn2+ ions, which inhibited the IFE and resulted in the fading of solution color and the recovery of the fluorescence signal. And these two kinds of signals were respectively used for qualitative and quantitative detection of GSH. The results showed that this proposed assay could distinguish 10 μM GSH with the naked eye and quantitatively detect GSH within the concentration range of 0.1-400 μM. The limit of detection was 6.6 nM. Moreover, this assay showed sensitive responses in human serum and urine samples, which indicated that this IFE-based assay has great potential in GSH-related clinical and bioanalytical applications.

| S-EPMC9034092 | biostudies-literature

Macromolecular Probe Based on a NiII/TbIII Coordination Polymer for Sensitive Recognition of Human Serum Albumin (HSA) and MnO4.

Project description:Reported here are the design and fluorescence characters of a NiII/TbIII polymer, [Tb2Ni3(HCAM)6(H2O)12] n (1) (H3CAM = chelidamic acid). Under physiological conditions, the binding of biocompatible water soluble 1 to human serum albumin (HSA) was studied by spectroscopy techniques, which revealed that 1 could inherent the fluorescent light of HSA in a static quencher course and change the HSA second-level structure. The marked enhancement in 1 and its fluorescence intensity provide conclusive evidence that 1 can play the role of a "turn-on" sensor for recognition and detection of HSA in other biological interferents with a K sv value of 7.68 × 104 M-1 and a detection limit of 0.14 μM. Luminescence experiments show that 1 has high selectivity and sensitivity to MnO4 - in other anions. Its quenching efficiency (K sv) is 5.54 × 103 M-1, and the detection limit is 0.29 μM.

| S-EPMC6682116 | biostudies-literature

MnO2-graphene nanosheets wrapped mesoporous carbon/sulfur composite for lithium-sulfur batteries.

Project description:MnO2-graphene nanosheets wrapped mesoporous carbon/sulfur (MGN@MC/S) composite is successfully synthesized derived from metal-organic frameworks and investigated as cathode for lithium-ion batteries. Used as cathode, MGN@MC/S composite possesses electronic conductivity network for redox electron transfer and strong chemical bonding to lithium polysulfides, which enables low capacity loss to be achieved. MGN@MC/S cathodes exhibit high reversible capacity of 1475 mA h g-1 at 0.1 C and an ultra-low capacity fading of 0.042% per cycle at 1 C over 450 cycles.

| S-EPMC5830778 | biostudies-literature

Discrimination and Quantification of Glutathione by Cu+-Based Nanozymes.

Project description:Glutathione (GSH) is the most abundant low-molecular-weight biological thiol in vivo and has been linked to several diseases. The accurate quantification of GSH is therefore crucial for disease diagnosis and monitoring. In this study, we prepared self-assembled Cu(I)-Cys (cysteine) nanozymes through a two-step procedure. The Cu(I)-Cys nanoparticles exhibited peroxidase-mimicking activity. Upon the addition of H2O2, they were able to oxidize 3,3,5,5-tetramethylbenzidine (TMB) into oxTMB, resulting in a measurable increase in UV-Vis absorption at 655 nm. However, in the presence of GSH, oxTMB was reduced back to TMB, leading to a decrease in UV-Vis absorption at 655 nm. By utilizing these changes in the absorption intensity, we achieved the sensitive detection of GSH with a detection limit of 2.13 μM. Moreover, taking advantage of the different peroxidase-mimicking activities of Cu(I)-Cys nanoparticles at various pH values, a sensor array with Cu(I)-Cys nanoparticles at pH 4 and pH 5 was constructed. The discrimination of GSH among Cys and ascorbic acid was achieved and the practicability of the sensor array in human serum was validated. This novel approach holds significant promise for the precise discrimination and quantification of GSH and its potential applications in disease diagnosis and therapeutics.

| S-EPMC10452140 | biostudies-literature

Self-assembly of 2D MnO2 nanosheets into high-purity aerogels with ultralow density.

Project description:Self-assembling inorganic nanoparticles (NPs) into macroscopic three dimensional (3D) architectures often requires the assistance of organic components, leaving residual organics in the resultant. In this work, organic-free MnO2 aerogels with ultralow density have been achieved by the self-assembly of two dimensional (2D) MnO2 nanosheets via an ice-templating approach. To the authors' best knowledge, it is the first reported case of constructing a high-purity inorganic aerogel from preformed NPs without using any functionalization or stabilization agents. Moreover, it has been demonstrated that an ultralight MnO2 aerogel with a density as low as ∼0.53 mg cm-3, which is the lightest metal oxide aerogel to date, can be well obtained by such an approach. The successful formation of the aerogel can be attributed to the enhanced van der Waals force between the 2D building blocks that have been more orderly arranged by the squeezing of ice crystals during the freezing process. Hence, this work shows a pioneering example of assembling inorganic NPs into aerogels relying only on the weak interactions between NPs (e.g. van der Waals forces). It has also been demonstrated that the obtained MnO2 aerogel can function as an effective absorbent for toxic reducing gas, owing to its strong oxidation ability and high porosity. The strategy presented herein holds good potential to be applied to the fabrication of other high-purity inorganic aerogels, especially those with 2D building blocks readily available.

| S-EPMC5966798 | biostudies-literature

Convenient and sensitive colorimetric detection of melamine in dairy products based on Cu(ii)-H2O2-3,3',5,5'-tetramethylbenzidine system.

Project description:The illegal adulteration of melamine in dairy products for false protein content increase is a strong hazard to human health. Herein, a simple and sensitive colorimetric method was developed for the quantification of melamine in dairy products based on a Cu2+-hydrogen peroxide (H2O2)-3,3',5,5'-tetramethylbenzidine (TMB) system. In this strategy, Cu2+ exhibits peroxidase-like activity and can catalyze the oxidation of TMB to oxidized TMB (oxTMB) in the presence of H2O2 with a blue colour change of the solution. However, the presence of melamine quickly interacts with H2O2 leading to the consumption of H2O2 and thus strongly hinders the oxidation of TMB. Under the optimal conditions, the absorbance change of oxTMB has a linear response to the concentration of melamine from 1 to 100 μM with a detection limit of 0.5 μM for melamine. The proposed method has many merits including more simplicity, good selectivity, and more cost-effectiveness without using any nanomaterials. The method was further successfully applied to detect melamine in dairy products including milk and infant formula powder.

| S-EPMC9087323 | biostudies-literature

Grain Boundary-Derived Cu+ /Cu0 Interfaces in CuO Nanosheets for Low Overpotential Carbon Dioxide Electroreduction to Ethylene.

Project description:Electrochemical CO2 reduction reaction can be used to produce value-added hydrocarbon fuels and chemicals by coupling with clean electrical energy. However, highly active, selective, and energy-efficient CO2 conversion to multicarbon hydrocarbons, such as C2 H4 , remains challenging because of the lack of efficient catalysts. Herein, an ultrasonication-assisted electrodeposition strategy to synthesize CuO nanosheets for low-overpotential CO2 electroreduction to C2 H4 is reported. A high C2 H4 Faradaic efficiency of 62.5% is achieved over the CuO nanosheets at a small potential of -0.52 V versus a reversible hydrogen electrode, corresponding to a record high half-cell cathodic energy efficiency of 41%. The selectivity toward C2 H4 is maintained for over 60 h of continuous operation. The CuO nanosheets are prone to in situ restructuring during CO2 reduction, forming abundant grain boundaries (GBs). Stable Cu+ /Cu0 interfaces are derived from the low-coordinated Cu atoms in the reconstructed GB regions and act as highly active sites for CO2 reduction at low overpotentials. In situ Raman spectroscopic analysis and density functional theory computation reveal that the Cu+ /Cu0 interfaces offer high *CO surface coverage and lower the activation energy barrier for *CO dimerization, which, in synergy, facilitates CO2 reduction to C2 H4 at low overpotentials.

| S-EPMC9313501 | biostudies-literature

A simple and highly sensitive colorimetric detection method for gaseous formaldehyde.

Project description:A colorimetric detection method using amine-functionalized polymer films doped with a pH indicator has been developed for the rapid, sensitive, and quantitative detection of gaseous formaldehyde at concentrations well below the immediately dangerous to life or health (IDLH) limit. In 1 min, visible color changes are easily observed, even down to the permissible exposure limit (PEL) at 750 ppb. The limit of detection is below 50 ppb (7% of the PEL) after 10 min of exposure. This sensor is essentially unaffected by changes in humidity or temperature (4 to 50 degrees C) and is not sensitive to common interferents.

| S-EPMC2854577 | biostudies-literature

Dual-Readout Immunochromatographic Assay by Utilizing MnO2 Nanoflowers as the Unique Colorimetric/Chemiluminescent Probe.

Project description:Manganese dioxide nanoflowers (MnO2 NFs) were synthesized and used as a dual readout probe to develop a novel immunochromatographic test strip (ITS) for detecting pesticide residues using chlorpyrifos as the model analyte. MnO2 NFs-labeled antibody for chlorpyrifos was employed as the signal tracer for conducting the ITS. After 10 min competitive immunoreaction, the tracer antibody was captured by the immobilized immunogen in the test strip, resulting in the captured MnO2 NFs on test line. The captured MnO2 NFs led to the appearance of brown color on the test line, which could be easily observed by the naked eye as a qualitative readout. Due to the very slight colorimetric difference of chlorpyrifos at trace concentrations, the semiquantitative readout by naked eyes could not meet the demand of quantitative analysis. MnO2 NFs showed a significant effect on the luminol-H2O2 chemiluminescent (CL) system, and the CL signal driven by MnO2 NFs were used to detect the trace concentration of chlorpyrifos quantitatively. 1,3-Diphenylisobenzofuran quenching studies and TMB-H2O2 coloration assays were conducted for studying the enhancing mechanism of MnO2 NFs, which was based on the oxidant activity to decompose H2O2 for forming reactive oxygen species. Under optimal conditions, the linear range of chlorpyrifos was 0.1-50 ng/mL with a low detection limit of 0.033 ng/mL (S/N = 3). The reliability of the dual-readout ITS was successfully demonstrated by the application on traditional Chinese medicine and environmental water samples. Due to the simultaneous rapid-qualitative and sensitive-quantitative detection, the dual-readout protocol provides a promising strategy for rapid screening and field assay on various areas such as environmental monitoring and food safety.

| S-EPMC8672369 | biostudies-literature

MnO2@Au nanostructures supported colorimetric biosensing with duplex-specific nuclease-assisted DNA structural transition.

Project description:Manganese dioxide (MnO2) nanosheets are regarded as a new class of two-dimensional nanomaterials with several attractive properties with enormous progress in biomedical fields. Gold nanoparticles (AuNPs) are also important biocompatible nanomaterials with unusual optical properties. Hetero-nanostructure of MnO2 and AuNPs with the medium of DNA is an interesting topic. In this work, the protection of the hetero-nanostructure from salt-induced aggregation is systematically investigated including the effects of sequence length, reagents concentrations, incubation time and temperature. The MnO2@Au nanostructures are thus applied for the analysis of miRNA. Duplex-specific nuclease (DSN) catalyzed digestion, hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA) are utilized for signal amplification. By finally analyzing the optical responses of the nanocomponents, highly sensitive analysis of target miRNA can be achieved. Excellent analytical performances are attributed to the unique features of MnO2@Au nanostructures and signal amplification designs. They are promising basis for the construction of novel biosensors for clinical applications.

| S-EPMC9932214 | biostudies-literature