Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermal conductivity of Fe-Si alloys and thermal stratification in Earth's core.

ABSTRACT: Light elements in Earth's core play a key role in driving convection and influencing geodynamics, both of which are crucial to the geodynamo. However, the thermal transport properties of iron alloys at high-pressure and -temperature conditions remain uncertain. Here we investigate the transport properties of solid hexagonal close-packed and liquid Fe-Si alloys with 4.3 and 9.0 wt % Si at high pressure and temperature using laser-heated diamond anvil cell experiments and first-principles molecular dynamics and dynamical mean field theory calculations. In contrast to the case of Fe, Si impurity scattering gradually dominates the total scattering in Fe-Si alloys with increasing Si concentration, leading to temperature independence of the resistivity and less electron-electron contribution to the conductivity in Fe-9Si. Our results show a thermal conductivity of ∼100 to 110 W⋅m^-1⋅K^-1 for liquid Fe-9Si near the topmost outer core. If Earth's core consists of a large amount of silicon (e.g., > 4.3 wt %) with such a high thermal conductivity, a subadiabatic heat flow across the core-mantle boundary is likely, leaving a 400- to 500-km-deep thermally stratified layer below the core-mantle boundary, and challenges proposed thermal convection in Fe-Si liquid outer core.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC8740763 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Low thermal conductivity of iron-silicon alloys at Earth's core conditions with implications for the geodynamo.

Project description:Earth's core is composed of iron (Fe) alloyed with light elements, e.g., silicon (Si). Its thermal conductivity critically affects Earth's thermal structure, evolution, and dynamics, as it controls the magnitude of thermal and compositional sources required to sustain a geodynamo over Earth's history. Here we directly measured thermal conductivities of solid Fe and Fe-Si alloys up to 144 GPa and 3300 K. 15 at% Si alloyed in Fe substantially reduces its conductivity by about 2 folds at 132 GPa and 3000 K. An outer core with 15 at% Si would have a conductivity of about 20 W m-1 K-1, lower than pure Fe at similar pressure-temperature conditions. This suggests a lower minimum heat flow, around 3 TW, across the core-mantle boundary than previously expected, and thus less thermal energy needed to operate the geodynamo. Our results provide key constraints on inner core age that could be older than two billion-years.

| S-EPMC7335046 | biostudies-literature

Sound velocities of Fe and Fe-Si alloy in the Earth's core.

Project description:Compressional wave velocity-density (V(P)--?) relations of candidate Fe alloys at relevant pressure-temperature conditions of the Earth's core are critically needed to evaluate the composition, seismic signatures, and geodynamics of the planet's remotest region. Specifically, comparison between seismic V(P)--? profiles of the core and candidate Fe alloys provides first-order information on the amount and type of potential light elements--including H, C, O, Si, and/or S-needed to compensate the density deficit of the core. To address this issue, here we have surveyed and analyzed the literature results in conjunction with newly measured V(P)--? results of hexagonal closest-packed (hcp) Fe and hcp-Fe(0.85)Si(0.15) alloy using in situ high-energy resolution inelastic X-ray scattering and X-ray diffraction. The nature of the Fe-Si alloy where Si is readily soluble in Fe represents an ideal solid-solution case to better understand the light-element alloying effects. Our results show that high temperature significantly decreases the V(P) of hcp-Fe at high pressures, and the Fe-Si alloy exhibits similar high-pressure V(P)--? behavior to hcp-Fe via a constant density offset. These V(P)--? data at a given temperature can be better described by an empirical power-law function with a concave behavior at higher densities than with a linear approximation. Our new datasets, together with literature results, allow us to build new V(P)--? models of Fe alloys in order to determine the chemical composition of the core. Our models show that the V(P)--? profile of Fe with 8 wt % Si at 6,000 K matches well with the Preliminary Reference Earth Model of the inner core.

| S-EPMC3387122 | biostudies-literature

Thermal expansion of iron-rich alloys and implications for the Earth's core.

Project description:Understanding the thermal-chemical state of the Earth's core requires knowledge of the thermal expansion of iron-rich alloys at megabar pressures and high temperatures. Our survey of literature revealed a significant lack of such data. We have determined the unit-cell parameters of the iron-sulfur compound Fe(3)S by using synchrotron x-ray diffraction techniques and externally heated diamond-anvil cells at pressures up to 42.5 GPa and temperatures up to 900 K. The zero-pressure thermal expansivity of Fe(3)S is determined in the form alpha = a(1) + a(2)T, where a(1) = 3.0 +/- 1.3 x 10(-5) K(-1) and a(2) = 2.8 +/- 1.5 x 10(-8) K(-2). The temperature dependence of isothermal bulk modulus ((partial differential)K(T,0)/(partial differential)T)(P) is estimated at -3.75 +/- 1.80 x 10(-2) GPa K(-1). Our data at 42.5 GPa and 900 K suggest that approximately 2.1 at. % (1.2 wt. %) sulfur produces 1% density deficit in iron. We have also carried out energy-dispersive x-ray diffraction measurements on pure iron and Fe(0.864)Si(0.136) alloy samples that were placed symmetrically in the same multi-anvil cell assemblies, using the SPring-8 synchrotron facility in Japan. Based on direct comparison of unit cell volumes under presumably identical pressures and temperatures, our data suggest that at most 3.2 at. % (1.6 wt. %) silicon is needed to produce 1% density deficit with respect to pure iron.

| S-EPMC1890464 | biostudies-literature

Lattice thermal conductivity of lower mantle minerals and heat flux from Earth's core.

Project description:The amount of heat flowing from Earth's core critically determines the thermo-chemical evolution of both the core and the lower mantle. Consisting primarily of a polycrystalline aggregate of silicate perovskite and ferropericlase, the thermal boundary layer at the very base of Earth's lower mantle regulates the heat flow from the core, so that the thermal conductivity (k) of these mineral phases controls the amount of heat entering the lowermost mantle. Here we report measurements of the lattice thermal conductivity of pure, Al-, and Fe-bearing MgSiO(3) perovskite at 26 GPa up to 1,073 K, and of ferropericlase containing 0, 5, and 20% Fe, at 8 and 14 GPa up to 1,273 K. We find the incorporation of these elements in silicate perovskite and ferropericlase to result in a ∼50% decrease of lattice thermal conductivity relative to the end member compositions. A model of thermal conductivity constrained from our results indicates that a peridotitic mantle would have k = 9.1 ± 1.2 W/m K at the top of the thermal boundary layer and k = 8.4 ± 1.2 W/m K at its base. These values translate into a heat flux of 11.0 ± 1.4 terawatts (TW) from Earth's core, a range of values consistent with a variety of geophysical estimates.

| S-EPMC3207700 | biostudies-literature

Effects of Si Content and Ca Addition on Thermal Conductivity of As-Cast Mg?Si Alloys.

Project description:The Mg?Si alloys have low CTEs (coefficients of thermal expansion) and other merits, which contribute to their application potential in the electronic industry. However, the details of their thermal properties are still unclarified, and need more research. In this study, the thermal conductivities (TC) of Mg?xSi (x = 1 wt.%, 1.38 wt.%, 2 wt.%, 3 wt.%, and 4 wt.%) binary alloys and Mg?4Si?yCa (y = 0.2 wt.%, 0.4 wt.%, 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%) alloys over the temperature range of 25?300 °C were systematically studied. The results show that the TC of Mg?xSi binary alloys decreases with the increase of Si content, while it increases slightly near the eutectic composition. The addition of a Ca element to Mg?4Si alloys has an obvious modification effect on the Mg?Si phase. When the Ca content increases constantly, the TC of the alloys decreases at first; then, there is a significant increase at the content of 0.8 wt.% Ca, and after that, it continues to decline. The mechanism is mainly related to the precipitation of the CaMgSi phase at 0.8 wt.% Ca content.

| S-EPMC6316939 | biostudies-other

Crystal structure and equation of state of Fe-Si alloys at super-Earth core conditions.

Project description:The high-pressure behavior of Fe alloys governs the interior structure and dynamics of super-Earths, rocky extrasolar planets that could be as much as 10 times more massive than Earth. In experiments reaching up to 1300 GPa, we combine laser-driven dynamic ramp compression with in situ x-ray diffraction to study the effect of composition on the crystal structure and density of Fe-Si alloys, a potential constituent of super-Earth cores. We find that Fe-Si alloy with 7 weight % (wt %) Si adopts the hexagonal close-packed structure over the measured pressure range, whereas Fe-15wt%Si is observed in a body-centered cubic structure. This study represents the first experimental determination of the density and crystal structure of Fe-Si alloys at pressures corresponding to the center of a ~3-Earth mass terrestrial planet. Our results allow for direct determination of the effects of light elements on core radius, density, and pressures for these planets.

| S-EPMC5916515 | biostudies-literature

Melting phase relations in Fe-Si-H at high pressure and implications for Earth's inner core crystallization.

Project description:Hydrogen could be an important light element in planetary cores, but its effect on phase diagrams of iron alloys is not well known because the solubility of H in Fe is minimal at ambient pressure and high-pressure experiments on H-bearing systems have been challenging. Considering that silicon can be another major light element in planetary cores, here we performed melting experiments on the Fe-Si-H system at ~ 50 GPa and obtained the ternary liquidus phase relations and the solid/liquid partition coefficient, D of Si and H based on in-situ high-pressure X-ray diffraction measurements and ex-situ chemical and textural characterizations on recovered samples. Liquid crystallized hexagonal close-packed (hcp) (Fe0.93Si0.07)H0.25, which explains the observed density and velocities of the Earth's solid inner core. The relatively high DSi = 0.94(4) and DH = 0.70(12) suggest that in addition to Si and H, the liquid outer core includes other light elements such as O, which is least partitioned into solid Fe and can thus explain the density difference between the outer and inner core. H and O, as well as Si, are likely to be major core light elements, supporting the sequestration of a large amount of water in the Earth's core.

| S-EPMC9200858 | biostudies-literature

Lattice thermal conductivity of MgO at conditions of Earth's interior.

Project description:Thermal conductivity of the Earth's lower mantle greatly impacts the mantle convection style and affects the heat conduction from the core to the mantle. Direct laboratory measurement of thermal conductivity of mantle minerals remains a technical challenge at the pressure-temperature (P-T) conditions relevant to the lower mantle, and previously estimated values are extrapolated from low P-T data based on simple empirical thermal transport models. By using a numerical technique that combines first-principles electronic structure theory and Peierls-Boltzmann transport theory, we predict the lattice thermal conductivity of MgO, previously used to estimate the thermal conductivity in the Earth, at conditions from ambient to the core-mantle boundary (CMB). We show that our first-principles technique provides a realistic model for the P-T dependence of lattice thermal conductivity of MgO at conditions from ambient to the CMB, and we propose thermal conductivity profiles of MgO in the lower mantle based on geotherm models. The calculated conductivity increases from 15 -20 W/K-m at the 670 km seismic discontinuity to 40 -50 W/K-m at the CMB. This large depth variation in calculated thermal conductivity should be included in models of mantle convection, which has been traditionally studied based on the assumption of constant conductivity.

| S-EPMC2842022 | biostudies-literature

Ultra-low Thermal Conductivity in Si/Ge Hierarchical Superlattice Nanowire.

Project description:Due to interfacial phonon scattering and nanoscale size effect, silicon/germanium (Si/Ge) superlattice nanowire (SNW) can have very low thermal conductivity, which is very attractive for thermoelectrics. In this paper, we demonstrate using molecular dynamics simulations that the already low thermal conductivity of Si/Ge SNW can be further reduced by introducing hierarchical structure to form Si/Ge hierarchical superlattice nanowire (H-SNW). The structural hierarchy introduces defects to disrupt the periodicity of regular SNW and scatters coherent phonons, which are the key contributors to thermal transport in regular SNW. Our simulation results show that periodically arranged defects in Si/Ge H-SNW lead to a ~38% reduction of the already low thermal conductivity of regular Si/Ge SNW. By randomizing the arrangement of defects and imposing additional surface complexities to enhance phonon scattering, further reduction in thermal conductivity can be achieved. Compared to pure Si nanowire, the thermal conductivity reduction of Si/Ge H-SNW can be as large as ~95%. It is concluded that the hierarchical structuring is an effective way of reducing thermal conductivity significantly in SNW, which can be a promising path for improving the efficiency of Si/Ge-based SNW thermoelectrics.

| S-EPMC4644949 | biostudies-literature

Study of anisotropic thermal conductivity in textured thermoelectric alloys by Raman spectroscopy.

Project description:Polycrystalline p-type Sb1.5Bi0.5Te3 (SBT) and n-type Bi2Te2.7Se0.3 (BTS) compounds possessing layered crystal structure show anisotropic electronic and thermal transport properties. This research is in pursuit of better understanding the anisotropic thermal properties using Raman spectroscopy. A systematic Raman spectroscopic study of the hot-pressed pellet of the textured p-type SBT and n-type BTS is reported in both directions: parallel (‖) and perpendicular (⊥) to the pressing axis as a function of temperature and laser power. The first-order temperature coefficient, optical thermal conductivity, and phonon lifetime are qualitatively determined from the temperature and laser power-dependent frequency and full-width half maximum (FWHM) of Raman peaks (A1 1g, E2 g & A2 1g). Anisotropy in experimental phonon thermal conductivity in both directions is correlated with the approximated optical thermal conductivity, phonon lifetime and phonon anharmonicity. The anisotropy in phonon anharmonicity in both directions is explained by the modified Klemens-Hart-Aggarwal-Lax phonon decay model. In this study, the symmetric three-phonon scattering process is considered responsible for thermal transport in the temperature range of 300 to 473 K.

| S-EPMC9036683 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data