Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Porous SiC and SiC/C_f Ceramic Microspheres Derived from Polyhydromethylsiloxane by Carbothermal Reduction.

ABSTRACT: A simple and inexpensive method for the preparation of porous SiC microspheres is presented. Polysiloxane microspheres derived from polyhydromethylsiloxane (PHMS) cross-linked with divinylbenzene (DVB) were ceramized under conditions leading to the removal of oxygen from the material. The content of free carbon (C_f) in highly crystalline silicon carbide (SiC) particles can be controlled by using various proportions of DVB in the synthesis of the pre-ceramic material. The chemical structure of the ceramic microspheres was studied by elemental analysis for carbon and oxygen, ²⁹Si MAS NMR, ¹³C MAS NMR, SEM/EDS, XRD and Raman spectroscopies, and their morphology by SEM, nitrogen adsorption and mercury intrusion porosimetries. The gaseous products of the thermal reduction processes formed during ceramization created a porous structure of the microspheres. In the SiC/C_f microspheres, meso/micro pores were formed, while in carbon-free SiC, microspheres macroporosity dominated.

SUBMITTER: Mizerska U

PROVIDER: S-EPMC8745781 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Binary Binder for Cf/C-SiC Composites with Enhanced Mechanical Property.

Project description:Cf/C-SiC composites have become the preferred material for high-temperature load-bearing applications because of their low density, high strength, and excellent thermal-physical properties. Due to the composite's poor sintering performance, the sintering temperature and pressure required for the preparation of Cf/C-SiC by traditional methods are also relatively high, which limits its engineering application. Herein, based on the precursor-derived ceramic route and C/C composites material preparation process, a binary binder (coal pitch and polysilylacetylene) is developed, which combines a carbon source, SiC precursor, and semi-ceramic SiC filler organically. Then, the SiC phase was successfully introduced into C/C composites by the slurry impregnation-hot pressing sintering method. The prepared Cf/C-SiC composites showed good mechanical properties, with a density of 1.53 g/cm3 and a bending strength of 339 ± 21 MPa. Moreover, the effects of the binary binder on the microstructure, density, and mechanical properties of Cf/C-SiC composites were investigated. This work provides a novel and effective approach to fabricating Cf/C-SiC composites with low density and high strength.

| S-EPMC9030504 | biostudies-literature

The Oxidation Behavior of ZrB2-SiC Ceramic Composites Fabricated by Plasma Spray Process.

Project description:Our goal is to develop a structural ceramic for high-temperature applications in which silicon carbide-based materials (SiCs) are used as matrix composites. The potential of SiCs to deposit a mixture of SiC and zirconium diboride (ZrB2) plasma spray coating is analyzed. To deposit thermal barrier layers containing up to 50 vol.% SiC, a high-pressure plasma spray (HPPS) process was used. Although the SiC cannot be deposited by thermal spray, a mixture of SiC and zirconium diboride (ZrB2) was deposited because these two compounds form a eutectic phase at a temperature below SiC decomposition. The preference was two different forms, 3 mm and 1 mm, of graphite substrates with different thickness values. A comparison of the morphology of SiC-ZrB2 coatings before and after thermal treatment was performed by applying heat to the surface of a gas torch and traditional furnace between 800 °C and 1200 °C. The growth of the oxide scale was calculated with X-ray diffraction (XRD), scanning electron microscopy (SEM)/energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), and density. The oxide scale consists of a SiO2 layer with ZrO2 groups. The findings indicate a greater potential for the studied material in protecting against high-temperature oxidation and in a wide variety of aerospace applications.

| S-EPMC7830389 | biostudies-literature

Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites.

Project description:In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMCs. The hysteresis loops of cross-ply C/SiC and SiC/SiC composites corresponding to different peak stresses have been predicted using present analysis. The damage parameter, i.e., the proportion of matrix cracking mode 3 in the entire matrix cracking modes of the composite, and the hysteresis dissipated energy increase with increasing peak stress. The damage parameter and hysteresis dissipated energy of C/SiC composite under low peak stress are higher than that of SiC/SiC composite; However, at high peak stress, the damage extent inside of cross-ply SiC/SiC composite is higher than that of C/SiC composite as more transverse cracks and matrix cracks connect together.

| S-EPMC5456556 | biostudies-other

Awn Stem-Derived High-Activity Free-Metal Porous Carbon for Oxidation Reduction.

Project description:Designing oxygen reduction reaction (ORR) catalysts with excellent performance has far-reaching significance. In this work, a high-activity biomass free-metal carbon catalyst with N and S co-doped was successfully prepared by using the KOH activated awn stem powder as the precursor with organic matter pore-forming doping technology, which is named TAAS. The content of pyridine nitrogen groups accounts for up to 36% of the total nitrogen content, and a rich pore structure is formed on the surface and inside, which are considered as the potential active centers of ORR. The results show that the specific surface area of TAAS reaches 191.04 m2/g, which effectively increases the active sites of the catalyst, and the initial potential and half slope potential are as high as 0.90 and 0.76 V vs. RHE, respectively. This study provides a low-cost, environmentally friendly and feasible strategy for the conversion of low-value agricultural and forestry wastes into high value-added products to promote sustainable development of energy and the environment.

| S-EPMC8512104 | biostudies-literature

Porous alumina ceramic sternum: A reliable option for sternal replacement.

Project description:CONTEXT:To date, there is no gold standard technique for sternum replacement. Current techniques rely on metallic prosthesis, meshes and bars, or bone grafts. However, they have several pitfalls. AIMS:The aim of this article is to report the results of sternal replacement with a porous alumina ceramic sternum. SETTINGS AND DESIGN:Surgeries were performed in two teaching hospitals in France. METHODS:We designed a porous alumina ceramic prosthesis which possesses interesting characteristics for this surgery such as great biocompatibility, a certain level of bacterial resistance, radiolucency, and compatibility with radiotherapy. The implant is stitched to the ribs with suture thread and does not require osteosynthesis material. RESULTS:Six patients with a mean age of 60.6 years received this prosthesis. Indication was tumor in five cases and mediastinitis in one case. The mean follow-up is 20 months (3-37 months). No major complication occurred and healing was fine for all patients. Patients did not complain of breathing discomfort or pain related to the prosthesis. CONCLUSIONS:This new technique is promising even if there are only six patients in this study.

| S-EPMC6196667 | biostudies-literature

Ultrafast carbothermal reduction of silica to silicon using a CO<sub>2</sub> laser beam.

Project description:We report the extraction of silicon via a carbothermal reduction process using a CO2 laser beam as a heat source. The surface of a mixture of silica and carbon black powder became brown after laser beam irradiation for a few tens of seconds, and clear peaks of crystalline silicon were observed by Raman shift measurements, confirming the successful carbothermal reduction of silica. The influence of process parameters, including the laser beam intensity, radiation time, nitrogen gas flow in a reaction chamber, and the molar ratios of silica/carbon black of the mixture, on the carbothermal reduction process is explained in detail.

| S-EPMC7729951 | biostudies-literature

A general method for rapid synthesis of refractory carbides by low-pressure carbothermal shock reduction.

Project description:Refractory carbides are attractive candidates for support materials in heterogeneous catalysis because of their high thermal, chemical, and mechanical stability. However, the industrial applications of refractory carbides, especially silicon carbide (SiC), are greatly hampered by their low surface area and harsh synthetic conditions, typically have a very limited surface area (<200 m2 g-1), and are prepared in a high-temperature environment (>1,400 °C) that lasts for several or even tens of hours. Based on Le Chatelier's principle, we theoretically proposed and experimentally verified that a low-pressure carbothermal reduction (CR) strategy was capable of synthesizing high-surface area SiC (569.9 m2 g-1) at a lower temperature and a faster rate (∼1,300 °C, 50 Pa, 30 s). Such high-surface area SiC possesses excellent thermal stability and antioxidant capacity since it maintained stability under a water-saturated airflow at 650 °C for 100 h. Furthermore, we demonstrated the feasibility of our strategy for scale-up production of high-surface area SiC (460.6 m2 g-1), with a yield larger than 12 g in one experiment, by virtue of an industrial viable vacuum sintering furnace. Importantly, our strategy is also applicable to the rapid synthesis of refractory metal carbides (NbC, Mo2C, TaC, WC) and even their emerging high-entropy carbides (VNbMoTaWC5, TiVNbTaWC5). Therefore, our low-pressure CR method provides an alternative strategy, not merely limited to temperature and time items, to regulate the synthesis and facilitate the upcoming industrial applications of carbide-based advanced functional materials.

| S-EPMC9477234 | biostudies-literature

Fatigue Damage and Lifetime of SiC/SiC Ceramic-Matrix Composite under Cyclic Loading at Elevated Temperatures.

Project description:In this paper, the fatigue damage and lifetime of 2D SiC/SiC ceramic-matrix composites (CMCs) under cyclic fatigue loading at 750, 1000, 1100, 1200 and 1300 °C in air and in steam atmosphere have been investigated. The damage evolution versus applied cycles of 2D SiC/SiC composites were analyzed using fatigue hysteresis dissipated energy, fatigue hysteresis modulus, fatigue peak strain and interface shear stress. The presence of steam accelerated the damage development inside of SiC/SiC composites, which increased the increasing rate of the fatigue hysteresis dissipated energy and the fatigue peak strain, and the decreasing rate of the fatigue hysteresis modulus and the interface shear stress. The fatigue life stress-cycle (S-N) curves and fatigue limit stresses of 2D SiC/SiC composites at different temperatures in air and in steam condition have been predicted. The fatigue limit stresses approach 67%, 28%, 39% 17% and 28% tensile strength at 750, 1000, 1100, 1200 and 1300 °C in air, and 49%, 10%, 9% and 19% tensile strength at 750, 1000, 1200 and 1300 °C in steam conditions, respectively.

| S-EPMC5506978 | biostudies-other

Cyanogel-Derived Synthesis of Porous PdFe Nanohydrangeas as Electrocatalysts for Oxygen Reduction Reaction.

Project description:It is important to develop cost-efficient electrocatalysts used in the oxygen reduction reaction (ORR) for widespread applications in fuel cells. Palladium (Pd) is a promising catalyst, due to its more abundant reserves and lower price than platinum (Pt), and doping an earth-abundant 3d-transition metal M into Pd to form Pd-M bimetallic alloys may not only further reduce the use of expensive Pd but also promote the electrocatalytic performance of ORR, owing to the synergistic effect between Pd and M. Here we report a cyanogel-derived synthesis of PdFe alloys with porous nanostructure via a simple coinstantaneous reduction reaction by using K2PdIICl4/K4FeII(CN)6 cyanogel as precursor. The synthesized PdFe alloys possess hydrangea-like morphology and porous nanostructure, which are beneficial to the electrochemical performance in ORR. The onset potential of the porous PdFe nanohydrangeas is determined to be 0.988 V, which is much more positive than that of commercial Pt/C catalyst (0.976 V) and Pd black catalyst (0.964 V). Resulting from the unique structural advantages and synergetic effect between bimetals, the synthesized PdFe nanohydrangeas with porous structure have outstanding electrocatalytic activity and stability for ORR, compared with the commercial Pd black and Pt/C.

| S-EPMC8708350 | biostudies-literature

Spinach-Derived Porous Carbon Nanosheets as High-Performance Catalysts for Oxygen Reduction Reaction.

Project description:Biomass-derived porous carbon materials are effective electrocatalysts for oxygen reduction reaction (ORR), with promising applications in low-temperature fuel cells and metal-air batteries. Herein, we developed a synthesis procedure that used spinach as a source of carbon, iron, and nitrogen for preparing porous carbon nanosheets and studied their ORR catalytic performance. These carbon sheets showed a very high ORR activity with a half-wave potential of +0.88 V in 0.1 M KOH, which is 20 mV more positive than that of commercial Pt/C catalysts. In addition, they showed a much better long-term stability than Pt/C and were insensitive to methanol. The remarkable ORR performance was attributed to the accessible high-density active sites that are primarily from Fe-N x moieties. This work paves the way toward the use of metal-enriching plants as a source for preparing porous carbon materials for electrochemical energy conversion and storage applications.

| S-EPMC7528166 | biostudies-literature