Dataset Information

What Is the Cause of Toxicity of Silicone Oil?

ABSTRACT: To investigate the toxicity of the low-molecular-weight components (LMWCs) in ophthalmic silicone oils (SilOils) on retinal cell lines. The toxicity of six types of LMWCs were studied and compared with conventional SilOil 1000 cSt. In vitro cytotoxic tests of LMWCs, in both liquid and emulsified forms, on three retinal cell lines (Müller cells (rMC-1), photoreceptor cells (661W) and retinal pigment epithelial cells (ARPE-19)) were conducted using a transwell cell culturing system. The morphology and viability of cells were assessed by light microscopy and Cell Counting Kit-8 (CCK-8) assay at different time points (6, 24 and 72 h). The ARPE-19 apoptotic pathway was investigated by Mitochondrial Membrane Potential/Annexin V Apoptosis Kit at different time points (6, 24 and 72 h). Apart from dodecamethylpentasiloxane (L5), all liquid LMWCs showed varying degrees of acute cytotoxicity on retinal cell lines within 72 h. Emulsified LMWCs showed comparable cytotoxicity with liquid LMWCs on retinal cell lines. Cyclic LMWCs, octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5) had significantly higher cytotoxicity when compared with their linear counterparts decamethyltetrasiloxane (L4) and L5 with similar molecular formula. Using ARPE-19 cells as an example, we showed that LMWCs induce the apoptosis of retinal cells. Most LMWCs, in both liquid and emulsified forms, can induce acute cytotoxicity. In addition, cyclic LMWCs are suspected to have higher cytotoxicity than their linear counterparts. Therefore, LMWCs are suspected to be the main cause of the long-term toxicity of ophthalmic SilOil, due to their toxicity and propensity to cause ophthalmic SilOil to emulsify. The amount of LMWCs should be considered as the paramount parameter when referring to the quality of SilOil.

SUBMITTER: Chen Y

PROVIDER: S-EPMC8745808 | biostudies-literature | 2021 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

What Is the Cause of Toxicity of Silicone Oil?

Chen Ying Y Lam Ip Yan Y Zhou Liangyu L Li Pik Yi PY Chan Yee Mei YM Lam Wai Ching WC Li Kenneth Kai Wang KKW Steel David H DH Chan Yau Kei YK

Materials (Basel, Switzerland) 20211230 1

<h4>Purpose</h4>To investigate the toxicity of the low-molecular-weight components (LMWCs) in ophthalmic silicone oils (SilOils) on retinal cell lines.<h4>Methods</h4>The toxicity of six types of LMWCs were studied and compared with conventional SilOil 1000 cSt. In vitro cytotoxic tests of LMWCs, in both liquid and emulsified forms, on three retinal cell lines (Müller cells (rMC-1), photoreceptor cells (661W) and retinal pigment epithelial cells (ARPE-19)) were conducted using a transwell cell c ...[more]

PMID: 35009415

Similar Datasets

Project description:Wetting plays a major role in the close interactions between liquids and solid surfaces, which can be tailored by modifying the chemistry as well as the structures of the surfaces' outermost layer. Several methodologies, such as chemical vapor deposition, physical vapor deposition, electroplating, and chemical reactions, among others, have been adopted for the alteration/modification of such interactions suitable for various applications. However, the fabrication of low-contact line-pinning hydrophobic surfaces via simple and easy methods remains an open challenge. In this work, we exploit one-step and multiple-step silicone oil (5-100 cSt) grafting on smooth silicon substrates (although the technique is suitable for other substrates), looking closely at the effect of viscosity as well as the volume and layers (one to five) of oil grafted as a function of the deposition method. Remarkably, the optimization of grafting of silicone oil fabrication results in non-wetting surfaces with extremely low contact angle hysteresis (CAH) below 1° and high contact angles (CAs) of ∼108° after a single grafting step, which is an order of magnitude smaller than the reported values of previous works on silicone oil-grafted surfaces. Moreover, the different droplet-surface interactions and pinning behavior can additionally be tailored to the specific application with CAH ranging from 1 to 20° and sliding angles between 1.5 and 60° (for droplet volumes of 3 μL), depending on the fabrication parameters adopted. In terms of roughness, all the samples (independent of the grafting parameters) showed small changes in the root-mean-square roughness below 20 nm. Lastly, stability analysis of the grafting method reported here under various conditions shows that the coating is quite stable under mechanical vibrations (bath ultrasonication) and in a chemical environment (ultrasonication in a bath of ethanol) but loses its low-pinning characteristics when exposed to saturated steam at T ∼ 99 °C. The findings presented here provide a basis for selecting the most appropriate and suitable method and parameters for silicone oil grafting aimed at low pinning and low hysteresis surfaces for specific applications.

Project description:Purpose:To investigate the characteristics of silicone oil (SO) emulsification after vitrectomy for rhegmatogenous retinal detachment and their possible correlations with clinical factors. Methods:The first 2?mL of washing out fluid after SO removal was collected, and used for the measurement of the size and number of SO droplets using a Multisizer® 3 Coulter counter (Beckman Coulter, USA). The correlations between SO droplets and clinical factors were analyzed. Results:A total of 38 patients (23 males, 15 females) who underwent primary PPV with SO injection for RRD and whose retina stayed attached for ?3 months after SO removal were included in the study. The average number of oil droplets was 1.96?×?106?±?3.95?×?106/mL (range 0.17?×?106 to 21.71?×?106/ml), and 80.8% (range 64.23%-99.07%) of the droplets were 1-2??m in diameter. The total number of emulsified SO droplets was not correlated with any clinical factor (all P > 0.05). When the emulsified SO droplets were divided into groups by their diameter, multiple linear regression revealed that age was negatively correlated with the numbers of 5-7-?m in diameter. The total number of emulsified SO droplets was not correlated with any clinical factor (all ?m in diameter. The total number of emulsified SO droplets was not correlated with any clinical factor (all P > 0.05). When the emulsified SO droplets were divided into groups by their diameter, multiple linear regression revealed that age was negatively correlated with the numbers of 5-7-?m in diameter. The total number of emulsified SO droplets was not correlated with any clinical factor (all ?m in diameter. The total number of emulsified SO droplets was not correlated with any clinical factor (all P > 0.05). When the emulsified SO droplets were divided into groups by their diameter, multiple linear regression revealed that age was negatively correlated with the numbers of 5-7. Conclusion:Using a Multisizer® Coulter counter, we successfully determined the number and size of SO droplets after emulsification. We found that the number of 5-12-?m-diameter droplets was higher in younger-age patients and was higher in patients using antiglaucoma eyedrops.?m in diameter. The total number of emulsified SO droplets was not correlated with any clinical factor (all.

Dataset Information

What Is the Cause of Toxicity of Silicone Oil?

Publications

What Is the Cause of Toxicity of Silicone Oil?

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets