Browse
Submit Data
Databases
API
Help

Dataset Information

4 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigation of Deoxidation Process of MoO₃ Using Environmental TEM.

ABSTRACT: In situ environmental transmission electron microscope (ETEM) could provide intuitive and solid proof for the local structure and chemical evolution of materials under practical working conditions. In particular, coupled with atmosphere and thermal field, the behavior of nano catalysts could be directly observed during the catalytic reaction. Through the change of lattice structure, it can directly correlate the relationship between the structure, size and properties of materials in the nanoscale, and further directly and accurately, which is of great guiding value for the study of catalysis mechanism and the optimization of catalysts. As an outstanding catalytic material in the application of methane reforming, molybdenum oxide (MoO₃)-based materials and its deoxidation process were studied by in situ ETEM method. The corresponding microstructures and components evolution were analyzed by diffraction, high-resolution transmission electron microscopy (HRTEM) and electron energy loss spectrum (EELS) techniques. MoO₃ had a good directional deoxidation process accompanied with the process of nanoparticles crushing and regrowth in hydrogen (H₂) and thermal field. However, in the absence of H₂, the samples would exhibit different structural evolution.

SUBMITTER: Ma P

PROVIDER: S-EPMC8746121 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Real-time investigation of nucleic acids phosphorylation process using molecular beacons.

Project description:Phosphorylation of nucleic acids is an indispensable process to repair strand interruption of nucleic acids. We have studied the process of phosphorylation using molecular beacon (MB) DNA probes in real-time and with high selectivity. The MB employed in this method is devised to sense the product of a 'phosphorylation-ligation' coupled enzyme reaction. Compared with the current assays, this novel method is convenient, fast, selective, highly sensitive and capable of real-time monitoring in a homogenous solution. The preference of T4 polynucleotide kinase (T4 PNK) has been investigated using this approach. The results revealed that a single-stranded oligonucleotide containing guanine at the 5' termini is most preferred, while those utilizing cytosine in this location are least preferred. The preference of (T)9 was reduced greatly when phosphoryl was modified at the 5' end, implying that T4 PNK could discern the phosphorylated/unphosphorylated oligonucleotides. The increase of oligonucleotide DNA length leads to an enhancement in preference. A fast and accurate method for assaying the kinase activity of T4 PNK has been developed with a wide linear detection range from 0.002 to 4.0 U/ml in 3 min. The effects of certain factors, such as NTP, ADP, (NH4)2SO4 and Na2HPO4, on phosphorylation have been investigated. This novel approach enables us to investigate the interactions between proteins and nucleic acids in a homogenous solution, such as those found in DNA repair or in drug development.

| S-EPMC1151592 | biostudies-literature

Real-Time Characterization Using in situ RHEED Transmission Mode and TEM for Investigation of the Growth Behaviour of Nanomaterials.

Project description:A novel characterization technique using both in situ reflection high-energy electron diffraction (RHEED) transmission mode and transmission electron microscopy (TEM) has been developed to investigate the growth behaviour of semiconductor nanostructures. RHEED employed in transmission mode enables the acquisition of structural information during the growth of nanostructures such as nanorods. Such real-time observation allows the investigation of growth mechanisms of various nanomaterials that is not possible with conventional ex situ analytical methods. Additionally, real-time monitoring by RHEED transmission mode offers a complete range of information when coupled with TEM, providing structural and chemical information with excellent spatial resolution, leading to a better understanding of the growth behaviour of nanomaterials. Here, as a representative study using the combined technique, the nucleation and crystallization of InAs nanorods and the epitaxial growth of InxGa1-xAs(GaAs) shell layers on InAs nanorods are explored. The structural changes in the InAs nanorods at the early growth stage caused by the transition of the local growth conditions and the strain relaxation processes that occur during epitaxial coating of the shell layers are shown. This technique advances our understanding of the growth behaviour of various nanomaterials, which allows the realization of nanostructures with novel properties and their application in future electronics and optoelectronics.

| S-EPMC5786047 | biostudies-literature

Calcite Scale Inhibition Using Environmental-Friendly Amino Acid Inhibitors: DFT Investigation.

Project description:Scale prevention is a long-term challenge. It is essential for ensuring the optimum utilization of oil and gas wells and minimizing economic losses due to disruptions in the hydrocarbon flow. Among the commonly precipitated scales is calcite, especially in oilfield production facilities. Previous studies on scale inhibitors have focused on investigating the performance of several phosphonates and carboxylates. However, the increased environmental awareness has pushed toward investigating environmental-friendly inhibitors. Research studies demonstrated the potential of using amino acids as standalone inhibitors or as inhibitor-modifying reagents. In this study, 10 amino acids for calcite inhibitors have been investigated using molecular simulations. Eco-toxicity, quantum chemical calculations, binding energy, geometrical, and charge analyses were all evaluated to gain a holistic view of the behavior and interaction of these inhibitors with the calcite {1 0 4} surface. According to the DFT simulation, alanine, aspartic acid, phenylalanine, and tyrosine amino acids have the best inhibitor features. The results revealed that the binding energies were -2.16, -1.75, -2.24, and -2.66 eV for alanine, aspartic acid, phenylalanine, and tyrosine, respectively. Therefore, this study predicted an inhibition efficiency of the order tyrosine > phenylalanine > alanine > aspartic acid. The predicted inhibition efficiency order reveals agreement with the reported experimental results. Finally, the geometrical and charge analyses illustrated that the adsorption onto calcite is physisorption in the acquired adsorption energy range.

| S-EPMC8638018 | biostudies-literature

Yb:MoO3/Ag/MoO3 Multilayer Transparent Top Cathode for Top-Emitting Green Quantum Dot Light-Emitting Diodes.

Project description:In this study, we report on the application of a dielectric/ultra-thin metal/dielectric (DMD) multilayer consisting of ytterbium (Yb)-doped molybdenum oxide (MoO3)/silver (Ag)/MoO3 stacked as the transparent cathode in top-emitting green quantum dot light-emitting diodes (QLED). By optimizing the Yb doping ratio, we have highly improved the electron injection ability from 0.01 to 0.35. In addition, the dielectric/ultra-thin metal/dielectric (DMD) cathode also shows a low sheet resistance of only 12.2 ?/sq, which is superior to the resistance of the commercially-available indium tin oxide (ITO) electrode (~15 ?/sq). The DMD multilayer exhibits a maximum transmittance of 75% and an average transmittance of 70% over the visible range of 400-700 nm. The optimized DMD-based G-QLED has a smaller current leakage at low driving voltage. The optimized DMD-based G-QLED enhances the current density than that of G-QLED with indium zinc oxide (IZO) as a cathode. The fabricated DMD-based G-QLED shows a low turn-on voltage of 2.2 V, a high current efficiency of 38 cd/A, and external quantum efficiency of 9.8. These findings support the fabricated DMD multilayer as a promising cathode for transparent top-emitting diodes.

| S-EPMC7221779 | biostudies-literature

TEM Nanostructural Investigation of Ag-Conductive Filaments in Polycrystalline ZnO-Based Resistive Switching Devices.

Project description:Memristive devices based on a resistive switching mechanism are considered very promising for nonvolatile memory and unconventional computing applications, even though many details of the switching mechanisms are not yet fully understood. Here, we report a nanostructural study by means of high-resolution transmission electron microscopy and spectroscopy techniques of a Ag/ZnO/Pt memristive device. To ease the localization of the filament position for its characterization, we propose to use the guiding effect of regular perturbation arrays obtained by FIB technology to assist the filament formation. HRTEM and EDX were used to identify the composition and crystalline structure of the so-obtained conductive filaments and surrounding regions. It was determined that the conducting paths are composed mainly of monocrystalline Ag, which remains polycrystalline in some circumstances, including the zone where the switching occurs and at secondary filaments created at the grain boundaries of the polycrystalline ZnO matrix. We also observed that the ZnO matrix shows a degraded quality in the switching zone, while it remains unaltered in the rest of the memristive device.

| S-EPMC8008384 | biostudies-literature

Interface Structure of MoO3 on Organic Semiconductors.

Project description:We have systematically studied interface structure formed by vapor-phase deposition of typical transition metal oxide MoO3 on organic semiconductors. Eight organic hole transport materials have been used in this study. Ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy are used to measure the evolution of the physical, chemical and electronic structure of the interfaces at various stages of MoO3 deposition on these organic semiconductor surfaces. For the interface physical structure, it is found that MoO3 diffuses into the underlying organic layer, exhibiting a trend of increasing diffusion with decreasing molecular molar mass. For the interface chemical structure, new carbon and molybdenum core-level states are observed, as a result of interfacial electron transfer from organic semiconductor to MoO3. For the interface electronic structure, energy level alignment is observed in agreement with the universal energy level alignment rule of molecules on metal oxides, despite deposition order inversion.

| S-EPMC4754744 | biostudies-literature

Optical-Based Thickness Measurement of MoO3 Nanosheets.

Project description:Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO3 flakes on SiO2/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of ±3 nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with ±2 nm of uncertainty.

| S-EPMC7407517 | biostudies-literature

Sequences of the genes for the TEM-20, TEM-21, TEM-22, and TEM-29 extended-spectrum beta-lactamases.

Project description:The sequences of the blaTEM genes encoding TEM-20, TEM-21, TEM-22, and TEM-29 extended-spectrum beta-lactamases were determined. Analysis of the deduced amino acid sequences indicated that TEM-20 and TEM-29 were derived from TEM-1 and that TEM-21 and TEM-22 were derived from TEM-2. The substitutions involved were Ser-238 and Thr-182 for TEM-20; His-164 for TEM-29; Lys-104, Arg-153, and Ser-238 for TEM-21; and Lys-104, Gly-237, and Ser-238 for TEM-22. The promoter region of the blaTEM-22 gene was identical to that of blaTEM-3. High-level production of TEM-20 could result from a 135-bp deletion which combined the -35 region of the Pa promoter with the -10 region of the P3 promoter and a G-->T transition in the latter motif.

| S-EPMC89239 | biostudies-literature

Chip-based <i>in situ</i> TEM investigation of structural thermal instability in aged layered cathode.

Project description:Thermally induced oxygen release is an intrinsic structural instability in layered cathodes, which causes thermal runaway issues and becomes increasingly critical with the continuous improvement in energy density. Furthermore, thermal runaway events always occur in electrochemically aged cathodes, where the coupling of the thermal and electrochemical effect remains elusive. Herein, we report the anomalous segregation of cobalt metal in an aged LiCoO2 cathode, which is attributed to the local exposure of the high-energy (100) surface of LiCoO2 and weak interface Co-O dangling bonds significantly promoting the diffusion of Co. The presence of the LCO-Co interface severely aggregated the oxygen release in the form of dramatic Co growth. A unique particle-to-particle oxygen release pathway was also found, starting from the isolated high reduction areas induced by the cycling heterogeneity. This study provides atomistic insight into the robust coupling between the intrinsic structural instability and electrochemical cycling.

| S-EPMC10408578 | biostudies-literature

Process Optimization and Environmental Analysis of Ultrasound-Assisted Biodiesel Production from Pangasius Fat Using CoFe2O4 Catalyst

Project description: Not available

| S-EPMC10552474 | biostudies-literature