Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Polymer Additives on the Microstructure and Mechanical Properties of Self-Leveling Rubberised Concrete.

ABSTRACT: The materials based on concrete with an addition of rubber are well-known. The interaction between concrete components and rubber particles is in the majority cases insufficient. For this reason, different substances are introduced into concrete-rubber systems. The aim of this paper is to establish the influence of five different polymer additives, i.e., 1. an aqueous dispersion of a styrene-acrylic ester copolymer (silanised) (ASS), 2. water dispersion of styrene-acrylic copolymer (AS), 3. anionic copolymer of acrylic acid ester and styrene in the form of powder (AS.RDP), 4. water polymer dispersion produced from the vinyl acetate and ethylene monomers (EVA), 5. copolymer powder of vinyl acetate and ethylene (EVA.RDP)) on the properties of the self-leveling rubberised concrete. Scanning electron microscopy has allowed to establish the interaction between the cement paste and rubber aggregates. Moreover, the compressive strength and flexural strength of the studied materials were evaluated. The results indicate that the mechanical properties depend extensively on the type as well as the amount of the polymer additive introduced into the system.

SUBMITTER: Kujawa W

PROVIDER: S-EPMC8746143 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Dataset on the effect of nano-modified additives of concrete mixes technological properties for winter concreting.

Project description:This article contains data of effect of nano-modified additives on the technological properties of concrete mixes for winter concreting. The nano-modified additive, consisting of naphthalene formaldehyde, nano-modified silicon dioxide, saponified wood resin and sodium nitrate, ensures the manufacturability of the concrete mix, its quality laying and normal curing at low outdoor temperatures. The nano-modified additive allows prevents the phenomenon of segregation of concrete mixes of grade C12/15. The application of nano-modified additive together with sodium nitrate (4?wt.% of cement) ensures normal conditions for the hydration of cement paste at ambient temperatures from +5?°C to -5?°C. This dataset is associated with a research article entitled "Effect of nano-modified additives on properties of concrete mixtures during winter season" [1].

| S-EPMC7280765 | biostudies-literature

Properties of concrete mortar incorporating recycle pulverized sandblasting waste as additives.

Project description:Sandblasting waste is a by-product obtained from the ship maintenance industry which is rich in silica content. This waste has a smaller particle size compared with typical sand and contains a high prevalence of impurities, so it is categorized as toxic and hazardous materials based on Indonesian Law. Furthermore, it also has not been efficiently harnessed, with most of it being relegated to disposal in waste landfills. To solve those problems, this research aimed to reduce the waste by reuse and recycle the sandblasting waste. In this study, the Pulverized Sandblasting Waste (PSW) used as additives in concrete mortars. Prior to use as an additive in mortar, the sandblasting waste was pretreated using chemical and mechanical processes. The mechanical pre-treatment was performed by pulverization for 8 and 12 h, later called PSW8h and PSW12h, respectively. Eleven mixture proportions were designed with constant Cement and w/c ratio. The PSW was added to the mortar specimens with a percentage of 0-5% from the weight of Cement as an additive. The test performed in this study includes compressive strength, Strength Activation Index (SAI), porosity, water absorption, and flexural test. The experimental results show that adding PSW into the mortar can enhance compressive and flexural strength. Furthermore, the results indicate that mortar with PSW has significantly lower porosity and water absorption than the control mixture. Using PSW with finer particle size shows better results in mechanical and durability properties of mortar, especially in concrete compressive and flexural strength.

| S-EPMC10867339 | biostudies-literature

Effect of Reinforcements and 3-D Printing Parameters on the Microstructure and Mechanical Properties of Acrylonitrile Butadiene Styrene (ABS) Polymer Composites.

Project description:Fused filament fabrication (FFF) systems utilize a wide variety of commercially available filaments, including Acrylonitrile Butadiene Styrene (ABS), as well as their variants. However, the effect of filament composition, reinforcements (chopped fibers and nanotubes), and 3-D printing variables on the microstructure and thermomechanical behavior is not well understood, and systematic studies are needed. In this work, different types of ABS materials with and without carbon fiber and carbon nanotube reinforcements were printed with multiple print layer heights. The microstructure, elastic behavior, tensile behavior, and fracture toughness of 3-D printed materials were characterized. ABS material systems printed at a low print layer height of 0.1 mm outperformed those printed at a larger height of 0.2 mm. Carbon nanotube reinforcements result in significant improvement in the strength and elastic modulus of ABS materials. Printed coupons of ABS with carbon nanotubes achieve an ultimate strength of 34.18 MPa, while a premium grade ABS coupon achieved 28.75 MPa when printed with the same print layer heights. Samples of ABS with chopped carbon fiber show an ultimate strength of 27.25 MPa, due primarily to the significant porosity present in the filament. Elastic moduli and fracture toughness measured using dynamic and mechanical methods show similar trends as a function of layer height. The effects of different materials, reinforcements, and printing parameters on the microstructure and mechanical properties are discussed in detail.

| S-EPMC9145829 | biostudies-literature

Properties and Microstructure Distribution of High-Performance Thermal Insulation Concrete.

Project description:The aim of this experimental study is to develop high strength and lightweight concrete mixture suitable for structural applications. This work investigates the effect of replacing normal aggregate either partially or totally with expanded perlite aggregate. This material allows for better thermal insulation properties, thus decreasing the energy usage within the life cycle of the concrete structure. Expanded perlite aggregate was used in concrete by 20%, 40%, 60%, 80%, and 100% in replacement of the natural aggregate. Material characterization tests of compressive strength, flexural strength, and thermal conductivity were carried out for six concrete mixtures. In addition, microstructure analysis was performed with the aid of a micro-computed tomography system to investigate the effects and relation of microstructure quantities on material properties. The proposed concrete mixture, which has 100% of expanded perlite aggregate, has a unit weight of 1703 kg/m3 and achieved reduction percentage of thermal conductivity around 62% (1.81 to 0.69 W·m-1·K-1) and a compressive strength of 42 MPa at 28 days; and thus is ideal for structural applications with enhanced properties.

| S-EPMC7254280 | biostudies-literature

Experimental Investigation on the Mechanical Properties of Self-Compacting Concrete under Uniaxial and Triaxial Stress.

Project description:To explore the influence of fly ash (FA) and silica fume (SF) on the mechanical properties of self-compacting concrete (SCC) under uniaxial and triaxial, the compressive strength test, splitting strength test, ultrasonic testing test, and triaxial test were performed in this paper. The results show that the 3 days compressive strength and splitting strength of SCC decreased with the increase of FA substitution rate. The 28 days, 56 days, and 91 days compressive strength and splitting strength of SCC increased first and then decreased with the increase of FA substitution rate. The peak stress and peak strain of SCC gradually increased with the increase of confining pressure. The peak stress and strain of SCC increased first and then decreased with the increase of FA substitution rate. Moreover, the relationship models between compressive strength and splitting strength, between compressive strength and amplitude, between peak stress, peak strain and confining pressure under different FA substitution rates were proposed. As a conclusion, the addition of SF can increase the strength of SCC obviously. Under uniaxial stress, SCC failure mode is splitting failure, under triaxial stress, SCC failure mode is shear failure. Based on the Mohr-Coulomb strength theory, the failure criterion of SCC with FA and SF was discussed.

| S-EPMC7216196 | biostudies-literature

Prediction Models for the Mechanical Properties of Self-Compacting Concrete with Recycled Rubber and Silica Fume.

Project description:The paper aims to investigate the influence of waste tire rubber and silica fume on the fresh and hardened properties of self-compacting concrete (SCC) and to design multivariate regression models for the prediction of the mechanical properties of self-compacting rubberized concrete (SCRC). For this purpose, 21 concrete mixtures were designed. Crumb rubber derived from end-of-life tires (grain size 0.5-3.5 mm) was replaced fine aggregate by 0%, 5%, 10%, 15%, 20%, 25%, and 30% of total aggregate volume. Silica fume was replaced cement by 0%, 5%, and 10% of the total cement mass. The optimal replacement level of both materials was investigated in relation to the values of the fresh properties and mechanical properties of self-compacting concrete. Tests on fresh and hardened self-compacting concrete were performed according to the relevant European standards. Furthermore, models for predicting the values of the compressive strength, modulus of elasticity, and flexural strength of SCRC were designed and verified with the experimental results of 12 other studies. According to the obtained results, mixtures with up to 15% of recycled rubber and 5% of silica fume, with 28 days compressive strength above 30 MPa, were found to be optimal mixtures for the potential future investigation of reinforced self-compacting rubberized concrete structural elements.

| S-EPMC7216221 | biostudies-literature

Effect of Polymer Molecular Mass and Structure on the Mechanical Properties of Polymer-Glass Hybrids.

Project description:Organic-inorganic hybrid materials are a promising class of materials for tissue engineering and other biomedical applications. In this systematic study, the effect of the polymer molecular mass (MM) with a linear architecture on hybrid mechanical properties is reported. Well-defined linear poly(methyl methacrylate-co-(3-(trimethoxysilyl)propyl methacrylate)) polymers with a range of MMs of 9 to 90 kDa and one 90 kDa star-shaped polymer were synthesized and then used to form glass-polymer hybrids. It was demonstrated that increasing linear polymer MM decreases the resultant hybrid mechanical strength. Furthermore, a star-polymer hybrid was synthesized as a comparison and demonstrated significantly different mechanical properties relative to its linear-polymer counterpart.

| S-EPMC8757365 | biostudies-literature

Effect of Processing Route on Microstructure and Mechanical Properties in Single-Roll Angular-Rolling.

Project description:This paper reports the effect of the processing route on the microstructure and mechanical properties in the pure copper sheets processed by single-roll angular-rolling (SRAR). The SRAR process was repeated up to six passes in two processing routes, called routes A and C in equal-channel angular pressing. As the number of passes increased, the heterogeneous evolution of hardness and microstructural heterogeneities between the core and surface regions gradually became intensified in both processing routes. In particular, route A exhibited more prominent partial grain refinement and dislocation localization on the core region than route C. The finite element analysis revealed that the intense microstructural heterogeneities observed in route A were attributed to effective shear strain partitioning between the core and surface regions by the absence of redundant strain. On the other hand, route C induced reverse shearing and cancellation of shear strain over the entire thickness, leading to weak shear strain partitioning and delayed grain refinement. Ultimately, this work suggests that route A is the preferred option to manufacture reverse gradient structures in that the degree of shear strain partitioning and microstructural heterogeneity between the core and surface regions is more efficiently intensified with increasing the number of passes.

| S-EPMC7321117 | biostudies-literature

Hybrid Cements: Mechanical Properties, Microstructure and Radiological Behavior.

Project description:The use of more eco-efficient cements in concretes is one of the keys to ensuring construction industry sustainability. Such eco-efficient binders often contain large but variable proportions of industrial waste or by-products in their composition, many of which may be naturally occurring radioactive materials (NORMs). This study explored the application of a new gamma spectrometric method for measuring radionuclide activity in hybrid alkali-activated cements from solid 5 cm cubic specimens rather than powder samples. The research involved assessing the effect of significant variables such as the nature of the alkaline activator, reaction time and curing conditions to relate the microstructures identified to the radiological behavior observed. The findings showed that varying the inputs generated pastes with similar reaction products (C-S-H, C-A-S-H and (N,C)-A-S-H) but different microstructures. The new gamma spectrometric method for measuring radioactivity in solid 5 cm cubic specimens in alkaline pastes was found to be valid. The variables involved in hybrid cement activation were shown to have no impact on specimen radioactive content. The powder samples, however, emanated 222Rn (a descendent of 226Ra), possibly due to the deformation taking place in fly ash structure during alkaline activation. Further research would be required to explain that finding.

| S-EPMC8781129 | biostudies-literature

Microstructure and mechanical properties of different keratinous horns.

Project description:Animal horns play an important role during intraspecific combat. This work investigates the microstructure and mechanical properties of horns from four representative ruminant species: the bighorn sheep (Ovis canadensis), domestic sheep (Ovis aries), mountain goat (Oreamnos americanus) and pronghorn (Antilocapra americana), aiming to understand the relation between evolved microstructures and mechanical properties. Microstructural similarity is found where disc-shaped keratin cells attach edge-to-edge along the growth direction of the horn core (longitudinal direction) forming a lamella; multiple lamellae are layered face to face along the impact direction (radial direction, perpendicular to horn core growth direction), forming a wavy pattern surrounding a common feature, the tubules. Differences among species include the number and shape of the tubules, the orientation of aligned lamellae and the shape of keratin cells. Water absorption tests reveal that the pronghorn horn has the largest water-absorbing ability due to the presence of nanopores in the keratin cells. The loading direction (compressive and tensile) and level of hydration vary among the horns from different species. The differences in mechanical properties among species may relate to their different fighting behaviours: high stiffness and strength in mountain goat to support the forces during stabbing; high tensile strength in pronghorn for interlocked pulling; impact energy absorption properties in domestic and bighorn sheep to protect the skull during butting. These design rules based on evolutionary modifications among species can be applied in synthetic materials to meet different mechanical requirements.

| S-EPMC6030630 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data