Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Biaxial Tensile Strain-Induced Enhancement of Thermoelectric Efficiency of α-Phase Se₂Te and SeTe₂ Monolayers.

ABSTRACT: Thermoelectric (TE) materials can convert waste heat into electrical energy, which has attracted great interest in recent years. In this paper, the effect of biaxial-tensile strain on the electronic properties, lattice thermal conductivity, and thermoelectric performance of α-phase Se₂Te and SeTe₂ monolayers are calculated based on density-functional theory and the semiclassical Boltzmann theory. The calculated results show that the tensile strain reduces the bandgap because the bond length between atoms enlarges. Moreover, the tensile strain strengthens the scatting rate while it weakens the group velocity and softens the phonon model, leading to lower lattice thermal conductivity k_l. Simultaneously, combined with the weakened k_l, the tensile strain can also effectively modulate the electronic transport coefficients, such as the electronic conductivity, Seebeck coefficient, and electronic thermal conductivity, to greatly enhance the ZT value. In particular, the maximum n-type doping ZT under 1% and 3% strain increases up to six and five times higher than the corresponding ZT without strain for the Se₂Te and SeTe₂ monolayers, respectively. Our calculations indicated that the tensile strain can effectively enhance the thermoelectric efficiency of Se₂Te and SeTe₂ monolayers and they have great potential as TE materials.

SUBMITTER: Chen SB

PROVIDER: S-EPMC8746480 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Topological Insulator in Two-Dimensional SiGe Induced by Biaxial Tensile Strain.

Project description:Strain-engineered two-dimensional (2D) SiGe is predicted to be a topological insulator (TI) based on first-principle calculations. The dynamical and thermal stabilities were ascertained through phonon spectra and ab initio molecular dynamics simulations. 2D SiGe remains dynamically stable under tensile strains of 4 and 6%. A band inversion was observed at the Γ-point with a band gap of 25 meV for 6% strain due to spin-orbit coupling interactions. Nontrivial of the TI phase was determined by its topological invariant (υ = 1). For SiGe nanoribbon with edge states, the valence band and conduction band cross at the Γ-point to create a topologically protected Dirac cone inside the bulk gap. We found that hexagonal boron nitride (h-BN) with high dielectric constant and band gap can be a very stable support to experimentally fabricate 2D SiGe as the h-BN layer does not alter its nontrivial topological character. Unlike other heavy-metal-based 2D systems, because SiGe has a sufficiently large gap, it can be utilized for spintronics and quantum spin Hall-based applications under ambient condition.

| S-EPMC6641324 | biostudies-literature

Mechanical, Structural and Electronic Properties of CO2 Adsorbed Graphitic Carbon Nitride (g-C3N4) under Biaxial Tensile Strain.

Project description:We investigate mechanical, structural and electronic properties of CO2 adsorbed graphitic carbon nitride (g-C3N4) system under biaxial tensile strain via first-principles calculations. The results show that the stress of CO2 adsorbed g-C3N4 system increases and then decreases linearly with the increasing biaxial strain, reaching maximum at 0.12 strain. This is primarily caused by the plane N-C stretching of the g-C3N4. Furthermore, both the Perdew-Burke-Ernzerhof (PBE) and Heyd- Scuseria-Ernzerhof screened hybrid functional (HSE06) band gaps show direct-indirect transitions under biaxial tensile strain and have the maximum also at 0.12 strain. It is found that there is large dipole transition matrix element around Γ point, leading high optical absorption coefficients of the deformed adsorption system, which would be of great use for the applications of new elastic nanoelectronic and optoelectronic devices.

| S-EPMC8347895 | biostudies-literature

Thermoelectric degrees of freedom determining thermoelectric efficiency.

Project description:For over half a century, the development of thermoelectric materials has based on the dimensionless figure of merit zT , assuming that the efficiency is mainly determined by this single parameter. Here, we show that the thermoelectric conversion efficiency is determined by three independent parameters, Zgen , τ, and β, which we call the three thermoelectric degrees of freedom (DoFs). Zgen is the well-defined mean of the traditional zT under nonzero temperature differences. The two additional parameters τ and β are gradients of material properties and crucial to evaluating the heat current altered by nonzero Thomson heat and asymmetric Joule heat escape. Each parameter is a figure of merit. Therefore, increasing one of the three DoFs leads to higher efficiency. Our finding explains why the single-parameter theory is inaccurate. Further, it suggests an alternative direction in material discovery and device design in thermoelectrics, such as high τ and β, beyond zT .

| S-EPMC8382987 | biostudies-literature

Tensile strain-induced softening of iron at high temperature.

Project description:In weakly ferromagnetic materials, already small changes in the atomic configuration triggered by temperature or chemistry can alter the magnetic interactions responsible for the non-random atomic-spin orientation. Different magnetic states, in turn, can give rise to substantially different macroscopic properties. A classical example is iron, which exhibits a great variety of properties as one gradually removes the magnetic long-range order by raising the temperature towards its Curie point of TC°= 1043 K. Using first-principles theory, here we demonstrate that uniaxial tensile strain can also destabilise the magnetic order in iron and eventually lead to a ferromagnetic to paramagnetic transition at temperatures far below TC°. In consequence, the intrinsic strength of the ideal single-crystal body-centred cubic iron dramatically weakens above a critical temperature of ~500 K. The discovered strain-induced magneto-mechanical softening provides a plausible atomic-level mechanism behind the observed drop of the measured strength of Fe whiskers around 300-500 K. Alloying additions which have the capability to partially restore the magnetic order in the strained Fe lattice, push the critical temperature for the strength-softening scenario towards the magnetic transition temperature of the undeformed lattice. This can result in a surprisingly large alloying-driven strengthening effect at high temperature as illustrated here in the case of Fe-Co alloy.

| S-EPMC4639729 | biostudies-literature

Photo-induced enhancement of the power factor of Cu2S thermoelectric films.

Project description:Element doping is commonly used to adjust the carrier concentrations in semiconductors such as thermoelectric materials. However, the doping process unavoidably brings in defects or distortions in crystal lattices, which further strongly affects the physical properties of the materials. In this work, high energy photons have been used to activate the carriers in Cu2S thermoelectric films. As a result, the carrier concentrations, and the respective electrical conductivity as well as Seebeck coefficient are further changed. The photon-induced electrical transport properties are further analyzed utilizing a Parallel circuit model. Due to the realization of optimized carrier concentrations by photon activation, the power factor of Cu2S film is improved more than 900 times as compared with the dark data. As compared to the traditional doping process, the approach using photon activation can realize the tuning of carrier concentrations without affecting crystal lattice. This method provides an opportunity to investigate the intrinsic physical properties of semiconductor materials without involving traditional element doping process that usually brings in additional lattice defects or distortions.

| S-EPMC4647207 | biostudies-literature

Novel biaxial tensile test for studying aortic failure phenomena at a microscopic level.

Project description:BackgroundAn aortic aneurysm is a local dilation of the aorta, which tends to expand and often results in a fatal rupture. Although larger aneurysms have a greater risk of rupture, some small aneurysms also rupture. Since the mechanism of aortic rupture is not well understood, clarification of the microstructure influencing the failure to rupture is important. Since aortic tissues are stretched biaxially in vivo, we developed a technique to microscopically observe the failure of an aortic rupture during biaxial stretch.MethodsA thinly sliced porcine thoracic aortic specimen was adhered to a circular frame and pushed onto a cylinder with a smaller diameter to stretch the specimen biaxially. To induce failure to rupture at the center, the specimen was thinned at the center of the hole as follows: the specimen was frozen while being compressed with metal plates having holes, which were 3 mm in diameter at their centers; the specimen was then sliced at 50-?m intervals and thawed.ResultsThe ratio of the thickness at the center to the peripheral area was 99.5% for uncompressed specimens. The ratio decreased with an increase in the compression ratio ?c and was 47.3% for specimens with ?c = 40%. All specimens could be stretched until failure to rupture. The probability for crack initiation within the cylinder was <30% and 100% for specimens with ?c <10% and ?c >30%, respectively. Among specimens ruptured within the cylinder, 93% of those obtained from the mid-media showed crack initiation at the thin center area.ConclusionsAortic tissues were successfully stretched biaxially until failure, and their crack initiation points were successfully observed under a microscope. This could be a very useful and powerful method for clarifying the mechanism of aortic rupture. We are planning to use this technique for a detailed investigation of events occurring at the point of failure when the crack initiates in the aortic aneurysm wall.

| S-EPMC3560224 | biostudies-literature

Enhanced Thermoelectric Power Factor of Tensile Drawn Poly(3-hexylthiophene).

Project description:The thermoelectric power factor of a broad range of organic semiconductors scales with their electrical conductivity according to a widely obeyed power law, and therefore, strategies that permit this empirical trend to be surpassed are highly sought after. Here, tensile drawing of the conjugated polymer poly(3-hexylthiophene) (P3HT) is employed to create free-standing films with a high degree of uniaxial alignment. Along the direction of orientation, sequential doping with a molybdenum tris(dithiolene) complex leads to a 5-fold enhancement of the power factor beyond the predicted value, reaching up to 16 ?W m-1 K-2 for a conductivity of about 13 S cm-1. Neither stretching nor doping affect the glass transition temperature of P3HT, giving rise to robust free-standing materials that are of interest for the design of flexible thermoelectric devices.

| S-EPMC6344060 | biostudies-literature

Pressure-induced enhancement in the thermoelectric properties of monolayer and bilayer SnSe2.

Project description:The electronic structures of monolayer and bilayer SnSe2 under pressure were investigated by using first-principles calculations including van der Waals interactions. For monolayer SnSe2, the variation of electronic structure under pressure is controlled by pressure-dependent lattice parameters. For bilayer SnSe2, the changes in electronic structure under pressure are dominated by intralayer and interlayer atomic interactions. The n-type thermoelectric properties of monolayer and bilayer SnSe2 under pressure were calculated on the basis of the semi-classical Boltzmann transport theory. It was found that the electrical conductivity of monolayer and bilayer SnSe2 can be enhanced under pressure, and such dependence can be attributed to the pressure-induced changes of the Se-Sn antibonding states in conduction band. Finally, the doping dependence of power factors of n-type monolayer and bilayer SnSe2 at three different pressures were estimated, and the results unveiled that thermoelectric performance of n-type monolayer and bilayer SnSe2 can be improved by applying external pressure. This study benefits to understand the nature of the transport properties for monolayer and bilayer SnSe2 under pressure, and it offers valuable insight for designing high-performance thermoelectric few-layered SnSe2 through strain engineering induced by external pressure.

| S-EPMC5882711 | biostudies-literature

Thermoelectric transports in pristine and functionalized boron phosphide monolayers.

Project description:Recently, a new monolayer Group III-V material, two-dimensional boron phosphide (BP), has shown great potential for energy storage and energy conversion applications. We study the thermoelectric properties of BP monolayer as well as the effect of functionalization by first-principles calculation and Boltzmann transport theory. Combined with a moderate bandgap of 0.90 eV and ultra-high carrier mobility, a large ZT value of 0.255 at 300 K is predicted for two-dimensional BP. While the drastically reduced thermal conductivity in hydrogenated and fluorinated BP is favored for thermoelectric conversion, the decreased carrier mobility has limited the improvement of thermoelectric figure of merit.

| S-EPMC8113530 | biostudies-literature

Enhancement of the thermoelectric properties in bilayer graphene structures induced by Fano resonances.

Project description:Fano resonances of bilayer graphene could be attractive for thermoelectric devices. The special profile presented by such resonances could significantly enhance the thermoelectric properties. In this work, we study the thermoelectric properties of bilayer graphene single and double barrier structures. The barrier structures are typically supported by a substrate and encapsulated by protecting layers, reducing considerably the phonon thermal transport. So, we will focus on the electronic contribution to the thermal transport. The charge carriers are described as massive chiral particles through an effective Dirac-like Hamiltonian. The Hybrid matrix method and the Landauer-Büttiker formalism are implemented to obtain the transmission, transport and thermoelectric properties. The temperature dependence of the Seebeck coefficient, the power factor, the figure of merit and the efficiency is analyzed for gapless single and double barriers. We find that the charge neutrality point and the system resonances shape the thermoelectric response. In the case of single barriers, the low-temperature thermoelectric response is dominated by the charge neutrality point, while the high-temperature response is determined by the Fano resonances. In the case of double barriers, Breit-Wigner resonances dominate the thermoelectric properties at low temperatures, while Fano and hybrid resonances become preponderant as the temperature rises. The values for the figure of merit are close to two for single barriers and above three for double barriers. The system resonances also allows us to optimize the output power and the efficiency at low and high temperatures. By computing the density of states, we also corroborate that the improvement of the thermoelectric properties is related to the accumulation of electron states. Our findings indicate that bilayer graphene barrier structures can be used to improve the response of thermoelectric devices.

| S-EPMC8260707 | biostudies-literature