Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Comparative Evaluation of Sustainable Binders for Environmentally Friendly Carbon-Based Supercapacitors.

ABSTRACT: Environmentally friendly energy storage devices have been fabricated by using functional materials obtained from completely renewable resources. Gelatin, chitosan, casein, guar gum and carboxymethyl cellulose have been investigated as sustainable and low-cost binders within the electrode active material of water-processable symmetric carbon-based supercapacitors. Such binders are selected from natural-derived materials and industrial by-products to obtain economic and environmental benefits. The electrochemical properties of the devices based on the different binders are compared by using cyclic voltammetry, galvanostatic charge/discharge curves and impedance spectroscopy. The fabricated supercapacitors exhibit series resistance lower than a few ohms and values of the specific capacitance ranged between 30 F/g and 80 F/g. The most performant device can deliver ca. 3.6 Wh/kg of energy at a high power density of 3925 W/kg. Gelatin, casein and carboxymethyl cellulose-based devices have shown device stability up to 1000 cycles. Detailed analysis on the charge storage mechanisms (e.g., involving faradaic and non-faradaic processes) at the electrode/electrolyte interface reveals a pseudocapacitance behavior within the supercapacitors. A clear correlation between the electrochemical performances (e.g., cycle stability, capacitance retention, series resistance value, coulombic efficiency) ageing phenomena and charge storage mechanisms within the porous carbon-based electrode have been discussed.

SUBMITTER: Landi G

PROVIDER: S-EPMC8746753 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Natural Product Inspired Environmentally Friendly Strategy Based on Dopamine Chemistry toward Sustainable Marine Antifouling.

Project description:The combination of natural active antifouling composition and intelligent coatings has been regarded as a prospective approach to avoid marine biofouling. However, the relatively complex coating structure and the excessive rapid release of antifoulants maintain unresolved issues in their practical application. In this work, a novel environmentally friendly natural antifoulant (Stellera chamaejasme, SC) encapsulated in the polydopamine (PDA) microcapsule (SC@PDA) is prepared by emulsion interfacial polymerization and blended with the acrylate polymer to prepare a sustainable antifouling coating. Herein, the PDA shell acting as an "intelligent capsule" ensures the controlled release of the antifoulant SC, and the corresponding SC loading amount could be high up to 75.40%. As a model antifoulant, the impact of SC on the adsorption activity of the protein bovine serum albumin (BSA) is studied, as well as the settlement of presentative fouling communities (diatom Navicula sp. and red algae Porphyridium sp.) on the constructed coating. The experimental results demonstrate that the natural product SC integrated eco-friendly antifouling coating occupies the superior capacity of impeding the adsorption of both protein BSA and algae. Such antifoulant (SC) integrating with controlled release character is a great advance in terms of marine antifouling applications. It is, therefore, expected that this innovation will provide guiding significance for developing the next generation of antifouling techniques, especially in the field of marine antifouling.

| S-EPMC7469372 | biostudies-literature

Multifunctional and Environmentally Friendly TiO2-SiO2 Mesoporous Materials for Sustainable Green Buildings.

Project description:This work deals with the formulation of environmentally friendly, cheap, and readily-available materials for green building applications, providing the function of air purificator by improving the safety and the comfort of an indoor environment. High surface area TiO2-SiO2 samples, prepared by a simple, cost effective, and scalable synthetic approach, proved to be effective in maximizing the properties of each component, i.e., the photocatalytic properties of titania and the high surface area of silica. TiO2 was introduced onto an ordered mesoporous silica Santa Barbara Amorphous-15 (SBA-15), that is featured by interesting insulating features, by using an incipient wetness impregnation method. The photocatalytic activity was evaluated in gas phase oxidation of ethylbenzene, which was selected as model volatile organic compound (VOC) molecule. The morphological, textural and structural features along with the electronic properties, the hydrophilicity and heat capacity of the materials were investigated in depth by scanning electron microscopy, powder X-ray diffraction, N2 physisorption, diffuse reflectance UV-Vis, FT-IR spectroscopies, and modulated DSC (MDSC) dynamic scan. Outstanding performances in the ethylbenzene abatement results are promising for further application in the green building sector.

| S-EPMC6930548 | biostudies-literature

Environmentally Friendly Fertilizers Based on Starch Superabsorbents.

Project description:Superabsorbents starches (SASs) were synthesized and characterized starting from native corn starch, bitter cassava and sweet cassava by graft copolymerization with itaconic acid. Additionally, their swelling behavior was studied both in water and in buffer solutions with different pHs and saline solutions. Their applicability was tested as environmentally friendly fertilizers in the absorption and release of urea, potassium nitrate and ammonium nitrate at different concentrations of fertilizers. The values of swelling at the equilibrium (H∞) in water and different media of the graft copolymers demonstrated their superabsorbent capacity, polyelectrolyte behavior, and smart response to environmental stimuli. The percentage of fertilizer absorbed and released from the SASs was a function of the initial concentration of the fertilizer in the medium. The loading and release of SASs were depended on the initial concentration of the fertilizer in the medium as well as the nature, structure, and morphology of the starch used.

| S-EPMC6862305 | biostudies-literature

Carbon-Yarn-Based Supercapacitors with In Situ Regenerated Cellulose Hydrogel for Sustainable Wearable Electronics.

Project description:Developing sustainable options for energy storage in textiles is needed to power future wearable "Internet of Things" (IoT) electronics. This process must consider disruptive alternatives that address questions of sustainability, reuse, repair, or even a second life application. Herein, we pair stretch-broken carbon fiber yarns (SBCFYs), as current collectors, and an in situ regenerated cellulose-based ionic hydrogel (RCIH), as an electrolyte, to fabricate 1D fiber-shaped supercapacitors (FSCs). The areal specific capacitance reaches 433.02 μF·cm-2 at 5 μA·cm-2, while the specific energy density is 1.73 × 10-2 μWh·cm-2. The maximum achieved specific power density is 5.33 × 10-1 mW·cm-2 at 1 mA·cm-2. The 1D FSCs possess a long-life cycle and 92% capacitance retention after 10 000 consecutive voltammetry cycles, higher than similar ones using the reference PVA/H3PO4 gel electrolyte. Additionally, the feasibility and reproducibility of the produced devices were demonstrated by connecting three devices in series and parallel, showing a small variation of the current density in flat and bent positions. An environmentally responsible approach was implemented by recovering the active materials from the 1D FSCs and reusing or recycling them without compromising the electrochemical performance, thus ensuring a circular economy path.

| S-EPMC9597547 | biostudies-literature

Carbon quantum dots: An environmentally friendly and valued approach to sludge disposal.

Project description:Sewage sludge, produced daily and inherent to urban development, presents problems of disposal that are still challenging today. Its disposal still offers palliative solutions, where the final destination is generally in landfills or, restrictively, to use in agriculture. The synthesis of carbon quantum dots (CQDs) from sewage sludge is a better alternative to use the stock of organic material present in the sludge. The present work aims to produce Carbon quantum dots (CQDs) using principles of green chemistry and to use an alternative raw material intrinsic stock of carbon present in sewage sludge, making its final disposal more sustainable. The material obtained has a core structure mainly composed of sp2 carbon and nitrogen. The surface functional groups containing sulfur, nitrogen, and oxygen of CQDs were investigated using FTIR and TG/DSC coupled FTIR techniques. The CQDs showed a luminescence decay time equivalent to fluorescent compounds and with satisfying quantum yield since no passive/oxidizing agent or material purification process was used. The photoluminescence spectroscopy analysis showed that the CDQs excitation λmax was at 360 nm and caused a λmax emission at 437 nm (CQDsa) and 430 nm (CQDsb). The CQDs obtained showed sizes of 9.69 ± 2.64 nm (CQDsa) and 10.92 ± 2.69 nm (CQDsb). In vitro experiments demonstrated the uptake of CQDs by the endothelial cell line EAhy 926 and their nontoxicity. However, the production of CQDs can be used for the sustainable disposal of sewage sludge.

| S-EPMC9403084 | biostudies-literature

Graphene with Covalently Grafted Amino Acid as a Route Toward Eco-Friendly and Sustainable Supercapacitors.

Project description:Eco-friendly, electrochemically active electrode materials based on covalent graphene derivatives offer enormous potential for energy storage applications. However, covalent grafting of functional groups onto the graphene surface is challenging due to its low reactivity. Here, fluorographene chemistry was employed to graft an arginine moiety via its guanidine group homogeneously on both sides of graphene. By tuning the reaction conditions and adding a non-toxic pore-forming agent, an optimum degree of functionalization and hierarchical porosity was achieved in the material. This tripled the specific surface area and yielded a high capacitance value of approximately 390 F g-1 at a current density of 0.25 A g-1 . The applicability of the electrode material was investigated under typical operating conditions by testing an assembled supercapacitor device for up to 30000 charging/discharging cycles, revealing capacitance retention of 82.3 %. This work enables the preparation of graphene derivatives with covalently grafted amino acids for technologically important applications, such as supercapacitor-based energy storage.

| S-EPMC8518929 | biostudies-literature

Bacteriophage-Based Bacterial Wilt Biocontrol for an Environmentally Sustainable Agriculture.

Project description:Bacterial wilt diseases caused by Ralstonia solanacearum, R. pseudosolanacearum, and R. syzygii subsp. indonesiensis (former R. solanacearum species complex) are among the most important plant diseases worldwide, severely affecting a high number of crops and ornamentals. Difficulties of bacterial wilt control by non-biological methods are related to effectiveness, bacterial resistance and environmental impact. Alternatively, a great many biocontrol strategies have been carried out, with the advantage of being environmentally friendly. Advances in bacterial wilt biocontrol include an increasing interest in bacteriophage-based treatments as a promising re-emerging strategy. Bacteriophages against the bacterial wilt pathogens have been described with either lytic or lysogenic effect but, they were proved to be active against strains belonging to R. pseudosolanacearum and/or R. syzygii subsp. indonesiensis, not to the present R. solanacearum species, and only two of them demonstrated successful biocontrol potential in planta. Despite the publication of three patents on the topic, until now no bacteriophage-based product is commercially available. Therefore, there is still much to be done to incorporate valid bacteriophages in an integrated management program to effectively fight bacterial wilt in the field.

| S-EPMC5509943 | biostudies-other

Resorcinol Derivative as an Environmentally Friendly Low Carbon Steel Inhibitor in HCl Medium.

Project description:An ecofriendly resorcinol derivative, dimethyl-4,6-dihydroxyisophthalate (DDIP) is examined as an anticorrosion agent for low carbon steel (CS) in a 0.5 mol L-1 HCl solution. Electrochemical and chemical methods are used to determine the effectiveness of the inhibitor. The DDIP compound decreased the rate of CS corrosion. The mitigation efficiency rose from 61.8 to 79.9% as the DDIP dose increased from 50 to 300 ppm in the corrosive medium. At 300 ppm, however, the efficiency decreased from 79.9 to 70.05% as the temperature increased from 25 to 55 °C. Physical quantities and thermodynamic parameters are discussed. The compound's adsorption follows Langmuir's concept. Adsorption of the DDIP compound is a mix of physisorption and chemisorption. The difference in E corr values is less than 85 mV, indicating that the examined compound is a mixed-type inhibitor. Scanning electron microscopy and atomic force microscopy revealed the development of a coherent film at CS in the presence of the DDIP inhibitor. The results obtained using various techniques were closely related, indicating validity and accuracy. The interaction between the DDIP molecules and the CS was explained by the density functional theory and Monte Carlo simulation. The quantum characteristics confirmed that the DDIP compound is a promising inhibitor.

| S-EPMC9161249 | biostudies-literature

Fuzzy Comprehensive Evaluation Assistant 3D-QSAR of Environmentally Friendly FQs to Reduce ADRs.

Project description:Most studies on adverse drug reactions (ADRs) of fluoroquinolones (FQs) have focused on the mechanisms of single ADRs, and no quantitative structure-activity relationship (QSAR) method studies have been carried out that combine several ADRs of FQs. In this study, an improved three-dimensional (3D) QSAR method was established using fuzzy comprehensive evaluation. This method could simultaneously consider three common ADRs of FQs using molecular parameters. The improved method could comprehensively predict three ADRs of FQs and provide direction for the development of new drugs with lower ADRs than the originals. According to the improved method, 48 derivatives with lower ADRs (decreased by 4.86% to 50.92%) were designed from pazufloxacin. Three derivatives with a higher genotoxicity, higher photodegradation, and lower bioconcentration than pazufloxacin were selected using the constructed QSAR methods of the FQs. Finally, three traditional 3D-QSAR methods of single ADR were constructed to validate the improved method. The improved method was reasonable, with a relative error range of 0.96% to 4.30%. This study provides valuable reference data and will be useful for the development of strategies to produce new drugs with few ADRs. In the absence of complementary biological studies of these adverse drug reactions, the results reported here may be quite divergent from those found in humans or experimental animals in vivo. One major reason for this is that many adverse drug reactions are dependent upon enzyme-catalyzed metabolic activation (toxication) or on non-enzymatic conversion to toxic products and are not due to the parent drug moiety.

| S-EPMC6747076 | biostudies-literature

Carbon Nanotubes Produced from Ambient Carbon Dioxide for Environmentally Sustainable Lithium-Ion and Sodium-Ion Battery Anodes.

Project description:The cost and practicality of greenhouse gas removal processes, which are critical for environmental sustainability, pivot on high-value secondary applications derived from carbon capture and conversion techniques. Using the solar thermal electrochemical process (STEP), ambient CO2 captured in molten lithiated carbonates leads to the production of carbon nanofibers (CNFs) and carbon nanotubes (CNTs) at high yield through electrolysis using inexpensive steel electrodes. These low-cost CO2-derived CNTs and CNFs are demonstrated as high performance energy storage materials in both lithium-ion and sodium-ion batteries. Owing to synthetic control of sp(3) content in the synthesized nanostructures, optimized storage capacities are measured over 370 mAh g(-1) (lithium) and 130 mAh g(-1) (sodium) with no capacity fade under durability tests up to 200 and 600 cycles, respectively. This work demonstrates that ambient CO2, considered as an environmental pollutant, can be attributed economic value in grid-scale and portable energy storage systems with STEP scale-up practicality in the context of combined cycle natural gas electric power generation.

| S-EPMC4827670 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data