Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

DNAzyme-Amplified Electrochemical Biosensor Coupled with pH Meter for Ca²⁺ Determination at Variable pH Environments.

ABSTRACT: For more than 50% of multiparous cows, it is difficult to adapt to the sudden increase in calcium demand for milk production, which is highly likely to cause hypocalcemia. An electrochemical biosensor is a portable and efficient method to sense Ca²⁺ concentrations, but biomaterial is easily affected by the pH of the analyte solution. Here, an electrochemical biosensor was fabricated using a glassy carbon electrode (GCE) and single-walled carbon nanotube (SWNT), which amplified the impedance signal by changing the structure and length of the DNAzyme. Aiming at the interference of the pH, the electrochemical biosensor (GCE/SWNT/DNAzyme) was coupled with a pH meter to form an electrochemical device. It was used to collect data at different Ca²⁺ concentrations and pH values, and then was processed using different mathematical models, of which GPR showed higher detecting accuracy. After optimizing the detecting parameters, the electrochemical device could determine the Ca²⁺ concentration ranging from 5 μM to 25 mM, with a detection limit of 4.2 μM at pH values ranging from 4.0 to 7.5. Finally, the electrochemical device was used to determine the Ca²⁺ concentrations in different blood and milk samples, which can overcome the influence of the pH.

SUBMITTER: Wang H

PROVIDER: S-EPMC8746961 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

DNAzyme-Amplified Label-Free Biosensor for the Simple and Sensitive Detection of Pyrophosphatase.

Project description:The level of pyrophosphatase (PPase) expression has been suggested as a potential biomarker of various cancers, and its prognostic value has been evaluated in patients suffering from lung cancer, colorectal cancer, and hyperthyroidism. However, the detection of PPase usually needs specific materials that require complicated, time-consuming reactions with restricted linear range and sensitivity, limiting their application in early clinical diagnosis. Herein, we developed a DNAzyme-based biosensor for the detection of PPase. In the presence of PPase, pyrophosphate (PPi) and Cu2+ ions released from the PPi-Cu2+-PPi complex induce the cleavage of the DNAzyme and the corresponding substrate. An apurinic/apyrimidinic (AP) site was elaborately designed within substrates that could encase the fluorophore 2-amino-5,6,7-trimethyl-1,8-naphthyridine (ATMND). The fluorescence of ATMND was initially quenched but restored when the DNAzyme/substrate complex was hydrolyzed with the release of ATMND. In this way, the PPase activity can be estimated by detecting the increased fluorescence of the released ATMND. Under optimized conditions, the activity of PPase could be analyzed at concentrations from 0.5 to 1000 mU, with the lowest detectable concentration being 0.5 mU. This work lays a foundation for developing a DNAzyme-amplified fluorescent biosensor with a high sensitivity, a wide linear range, and single-step operation for use as an easy diagnostic for PPase analysis.

| S-EPMC8615721 | biostudies-literature

Electrochemical Biosensor Using Nitrogen-Doped Graphene/Au Nanoparticles/DNAzyme for Ca2+ Determination.

Project description:An electrochemical biosensor for detecting Ca2+ concentration was proposed using glass carbon electrodes (GCEs) modified with nitrogen-doped graphene (NGR), gold nanoparticles (AuNPs) and DNAzyme. The resistance signal was amplified through two methods: electrochemical reduction of AuNPs on the NGR surface to increase the specific surface area of the electrode and strengthen the adsorption of DNAzyme; and increasement of the DNAzyme base sequence. The process of electrode modification was characterized by scanning electron microscopy, Raman spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Experimental parameters' influence, such as the deposition time of gold nanoparticles and the detection time, were assessed by electrochemical methods. The linear ranges of the electrochemical biosensor were in the range from 5 × 10-6 to 5 × 10-5 and 5 × 10-5 to 4 × 10-4 M, with a detection limit of 3.8 × 10-6 M. The concentration of Ca2+ in the serum of dairy cows was determined by the biosensor with satisfactory results, which could be potentially used to diagnose subclinical hypocalcemia.

| S-EPMC9138538 | biostudies-literature

Highly pH-responsive sensor based on amplified spontaneous emission coupled to colorimetry.

Project description:We demonstrated a simple, directly-readable approach for high resolution pH sensing. The method was based on sharp changes in Amplified Spontaneous Emission (ASE) of a Stilbene 420 (ST) laser dye triggered by the pH-dependent absorption of Bromocresol Green (BG). The ASE threshold of BG:ST solution mixtures exhibited a strong dependence on BG absorption, which was drastically changed by the variations of the pH of BG solution. As a result, ASE on-off or off-on was observed with different pH levels achieved by ammonia doping. By changing the concentration of the BG solution and the BG:ST blend ratio, this approach allowed to detect pH changes with a sensitivity down to 0.05 in the 10-11 pH range.

| S-EPMC5384246 | biostudies-literature

Growth-coupled heme Biosensor

Project description:Biosensor-based growth-coupling as an evolutionary strategy to improve heme export in Corynebacterium glutamicum

| PRJEB79651 | ENA

A pH-independent electrochemical aptamer-based biosensor supports quantitative, real-time measurement in vivo.

Project description:The development of biosensors capable of achieving accurate and precise molecular measurements in the living body in pH-variable biological environments (e.g. subcellular organelles, biological fluids and organs) plays a significant role in personalized medicine. Because they recapitulate the conformation-linked signaling mechanisms, electrochemical aptamer-based (E-AB) sensors are good candidates to fill this role. However, this class of sensors suffers from a lack of a stable and pH-independent redox reporter to support their utility under pH-variable conditions. Here, in response, we demonstrate the efficiency of an electron donor π-extended tetrathiafulvalene (exTTF) as an excellent candidate (due to its good electrochemical stability and no proton participation in its redox reaction) of pH-independent redox reporters. Its use has allowed improvement of E-AB sensing performance in biological fluids under different pH conditions, achieving high-frequency, real-time molecular measurements in biological samples both in vitro and in the bladders of living rats.

| S-EPMC9350589 | biostudies-literature

Single bead-based electrochemical biosensor.

Project description:A simple, robust, single bead-based electrochemical biosensor was fabricated and characterized. The sensor's working electrode consists of an electrochemically etched platinum wire, with a nominal diameter of 25 microm, hermetically heat-fusion sealed in a pulled glass capillary (micropipette). The sealing process does not require any epoxy or glue. A commercially available, densely functionalized agarose bead was mounted on the tip of the etched platinum wire. The use of a pre-functionalized bead eliminates the tedious and complicated surface functionalization process that is often the bottleneck in the development of electrochemical biosensors. We report on the use of a biotin agarose bead-based, micropipette, electrochemical (Bio-BMP) biosensor to monitor H(2)O(2) concentration and the use of a streptavidin bead-based, micropipette, electrochemical (SA-BMP) biosensor to detect DNA amplicons. The Bio-BMP biosensor's response increased linearly as the H(2)O(2) concentration increased in the range from 1 x 10(-6) to 1.2 x10(-4)M with a detection limit of 5 x 10(-7)M. The SA-BMP was able to detect the amplicons of 1pg DNA template of B. Cereus bacteria, thus providing better detection sensitivity than conventional gel-based electropherograms.

| S-EPMC2784131 | biostudies-literature

PAM-free cascaded strand displacement coupled with CRISPR-Cas12a for amplified electrochemical detection of SARS-CoV-2 RNA.

Project description:The early diagnosis of coronavirus disease 2019 (COVID-19) is dependent on the specific and sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA. Herein, we develop a highly sensitive and specific electrochemical biosensor for SARS-CoV-2 target RNA detection based on the integration of protospacer adjacent motif (PAM)-free cascaded toehold-mediated strand displacement reaction (TSDR) and CRISPR-Cas12a (PfTSDR-CRISPR). In this study, each target is transformed into multiple DNA substrates with bubble structure in the seed region by the cascaded TSDR, which can directly hybridize with guide RNA (gRNA) without PAM requirement and then activate CRISPR-Cas12a's trans-cleavage activity. Subsequently, the hairpin DNA modified with methylene blue (MB-HP) is cleaved by activated CRISPR-Cas12a. Therefore, as MB leaves the electrode surface, a decreased current signal is obtained. With the involvement of PAM-free cascaded TSDRs and CRISPR-Cas12a amplification strategy, the PfTSDR-CRISPR-based electrochemical biosensor achieves the detection of target RNA as low as 40 aM. The biosensor has high sequence specificity, reliability and robustness. Thanks to the PAM-free cascaded TSDR, the biosensor can achieve universal detection of different target RNA without redesigning gRNA sequence of CRISPR-Cas12a. In addition, this biosensor successfully detects SARS-CoV-2 target RNA in complex samples, which highlights its potential for diagnosing COVID-19.

| S-EPMC9833854 | biostudies-literature

DNAzyme Sensor for the Detection of Ca2+ Using Resistive Pulse Sensing.

Project description:DNAzymes are DNA oligonucleotides that can undergo a specific chemical reaction in the presence of a cofactor. Ribonucleases are a specific form of DNAzymes where a tertiary structure undergoes cleavage at a single ribonuclease site. The cleavage is highly specificity to co-factors, which makes them excellent sensor recognition elements. Monitoring the change in structure upon cleavage has given rise to many sensing strategies; here we present a simple and rapid method of following the reaction using resistive pulse sensors, RPS. To demonstrate this methodology, we present a sensor for Ca2+ ions in solution. A nanoparticle was functionalised with a Ca2+ DNAzyme, and it was possible to follow the cleavage and rearrangement of the DNA as the particles translocate the RPS. The binding of Ca2+ caused a conformation change in the DNAzyme, which was monitored as a change in translocation speed. A 30 min assay produced a linear response for Ca2+ between 1-9 μm, and extending the incubation time to 60 min allowed for a concentration as low as 0.3 μm. We demonstrate that the signal is specific to Ca2+ in the presence of other metal ions, and we can quantify Ca2+ in tap and pond water samples.

| S-EPMC7589696 | biostudies-literature

A DNAzyme-amplified DNA circuit for highly accurate microRNA detection and intracellular imaging.

Project description:Biomolecular self-assembly circuits have been well developed for high-performance biosensing and bioengineering applications. Here we designed an isothermal concatenated nucleic acid amplification system which is composed of a lead-in catalyzed hairpin assembly (CHA), intermediate hybridization chain reaction (HCR) and ultimate DNAzyme amplifier units. The analyte initiates the self-assembly of hairpin reactants into dsDNA products in CHA, which generates numerous trigger sequences for activating the subsequent HCR-assembled long tandem DNAzyme nanowires. The as-acquired DNAzyme catalyzed the successive cleavage of its substrates, leading to an amplified fluorescence readout. The sophisticated design of our CHA-HCR-DNAzyme scheme was systematically investigated in vitro and showed dramatically enhanced detection performance. As a general sensing strategy, this CHA-HCR-DNAzyme method enables the amplified analysis of miRNA and its accurate intracellular imaging in living cells, originating from their synergistic signal amplifications. This method shows great potential for analyzing trace amounts of biomarkers in various clinical research studies.

| S-EPMC7006504 | biostudies-literature

Detection of Vibrio vulnificus in Seafood With a DNAzyme-Based Biosensor.

Project description:Vibrio vulnificus is an important pathogenic bacterium that is often associated with seafood-borne illnesses. Therefore, to detect this pathogen in aquatic products, a DNAzyme-based fluorescent sensor was developed for the in vitro detection of V. vulnificus. After screening and mutation, a DNAzyme that we denominated "RFD-VV-M2" exhibited the highest activity, specificity, and sensitivity. The limit of detection was 2.2 × 103 CFU/ml, and results could be obtained within 5-10 min. Our findings suggested that the target of DNAzyme RFD-VV-M2 was a protein with a molecular weight between 50 and 100 kDa. The proposed biosensor exhibited an excellent capacity to detect marine products contaminated with V. vulnificus. Therefore, our study established a rapid, simple, sensitive, and highly specific detection method for V. vulnificus in aquatic products.

| S-EPMC8213197 | biostudies-literature