Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rapid Preparation of Fluorescent Carbon Dots from Pine Needles for Chemical Analysis.

ABSTRACT: Fluorescent carbon dots with blue, green, and red emissions were rapidly prepared from modified pine needles through microwave irradiation in a one-pot reaction. The fluorescence intensity and emission versatility for a carbon source were experimentally optimized. The reaction times were under 10 min and the reaction temperatures were lower than 220 °C. Potential applications of magnetic fluorescence-linked immunoassays of carcinoembryonic antigen (CEA) and tumor necrosis factor-alpha (TNF-α) were presented. The detection limits for CEA and TNF-α (3.1 and 2.8 pg mL^-1, respectively) are lower than those presented in other reports, whereas the linear ranges for CEA and TNF-α (9 pg mL^-1 to 18 ng mL^-1 and 8.5 pg mL^-1 to 17 ng mL^-1, respectively) are wider than those presented in other reports. Magnetic immunoassays with fluorescent CD_s prepared from pine needles can enable rapid, sensitive, and selective detections for biochemical analysis.

SUBMITTER: Tsai H

PROVIDER: S-EPMC8746989 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Full-color fluorescent carbon quantum dots.

Project description:Quantum dots have innate advantages as the key component of optoelectronic devices. For white light-emitting diodes (WLEDs), the modulation of the spectrum and color of the device often involves various quantum dots of different emission wavelengths. Here, we fabricate a series of carbon quantum dots (CQDs) through a scalable acid reagent engineering strategy. The growing electron-withdrawing groups on the surface of CQDs that originated from acid reagents boost their photoluminescence wavelength red shift and raise their particle sizes, elucidating the quantum size effect. These CQDs emit bright and remarkably stable full-color fluorescence ranging from blue to red light and even white light. Full-color emissive polymer films and all types of high-color rendering index WLEDs are synthesized by mixing multiple kinds of CQDs in appropriate ratios. The universal electron-donating/withdrawing group engineering approach for synthesizing tunable emissive CQDs will facilitate the progress of carbon-based luminescent materials for manufacturing forward-looking films and devices.

| S-EPMC7852397 | biostudies-literature

The Cost-Effective Preparation of Green Fluorescent Carbon Dots for Bioimaging and Enhanced Intracellular Drug Delivery.

Project description:Doxorubicin entrapped carbon dots (DOX-CDs) were prepared for bioimaging and enhanced intracellular drug delivery. The CDs were synthesized via the hydrothermal method using citrate and urea under 200 °C for 1 h. Then, DOX was successfully conjugated on the CDs via physicochemical interactions. The DOX-CDs exhibited good crystal structure, remarkable aqueous stability, excellent photoluminescence property, and a high quantum yield of 93%. The fluorescent images revealed that the DOX-CDs could be readily taken up by the cancer cells for cell labeling. Furthermore, endo-lysosomal pH-assisted DOX release behavior was observed from DOX-CDs, and the cytotoxicity of DOX-CDs was confirmed by the MTS assay against H0-8910 ovarian cancer cells. In addition, the CDs indicated bright fluorescent signal in the animal imaging test and demonstrated low toxicity after administration for 7 and 21 days. Therefore, the prepared CDs could be a promising imaging probe for biomedical imaging and intracellular drug delivery.

| S-EPMC7056761 | biostudies-literature

Gymnopus androsaceus growth on pine needles

Project description:Illumina HiSeq2500 technology was used to generate mRNA profiles from Gymnopus androsaceus grown on pine needles for 2, 5 and 10 months. Paired-end reads of 125 bp were generated and aligned to Gymnopus androsaceus reference transcripts using CLC Genomics Workbench 9.

2019-11-28 | GSE139333 | GEO

Chalara longipesis growth on pine needles

Project description:Illumina HiSeq2500 technology was used to generate mRNA profiles from Chalara longipesis grown on pine needles for 2, 5 and 10 months. Paired-end reads of 125 bp were generated and aligned to Chalara longipesis reference transcripts using CLC Genomics Workbench 9.

2019-11-28 | GSE139254 | GEO

A Facile Preparation of Multicolor Carbon Dots.

Project description:Carbon dots (CDs) have raised broad interest because of their great potential in the fluorescence related fields, such as photocatalysis and bioimaging. CDs exhibit different optical properties when dissolved in various solvents. However, the effects of solvents during the process of preparation on the fluorescence emission of CDs are still unclear. In this work, CDs were prepared by a simple one-pot solvothermal route. Typical critic acid and thiourea were used as precursors. Through changing the volume ratio of water to N,N-dimethylformamide (DMF), we have obtained color tunable CDs, with the emission wavelength from 450 to 640 nm. TEM images, Raman and XPS spectra indicate that the particle size of CDs and the content of surface functional groups (C-N/C-S and C≡N bonds) increase with the increasing ratio of DMF to water, which results in the optimal emission wavelength red-shifted. The prepared multicolor CDs may have prospects in the lighting applications.

| S-EPMC8904681 | biostudies-literature

Green Preparation of Fluorescent Nitrogen-Doped Carbon Quantum Dots for Sensitive Detection of Oxytetracycline in Environmental Samples.

Project description:Nitrogen-doped carbon quantum dots (N-CQDs) with strong fluorescence were prepared by a one-step hydrothermal method using natural biomass waste. Two efficient fluorescent probes were constructed for selective and sensitive detection of oxytetracycline (OTC). The synthesized N-CQDs were characterized by UV-visible absorption spectra, fluorescence spectra, Fourier transform infrared spectroscopy (FT-IR), X-ray photon spectroscopy (XPS), atomic force microscopy (AFM), and high-resolution transmission electron microscopy (HRTEM), which proved that the synthesized N-CQDs surface were functionalized and had stable fluorescence performance. The basis of N-CQDs detection of OTC was discussed, and various reaction conditions were studied. Under optimized conditions, orange peel carbon quantum dots (ON-CQDs) and watermelon peel carbon quantum dots (WN-CQDs) have a good linear relationship with OTC concentrations in the range of 2-100 µmol L-1 and 0.25-100 µmol L-1, respectively. ON-CQDs and WN-CQDs were both successfully applied in detecting the OTC in pretreated tap water, lake water, and soil, with the recovery rate at 91.724-103.206%, and the relative standard deviation was less than 5.35%. The results showed that the proposed N-CQDs proved to be green and simple, greatly reducing the detection time for OTC in the determination environment.

| S-EPMC7466531 | biostudies-literature

Preparation of Multicolour Solid Fluorescent Carbon Dots for Light-Emitting Diodes Using Phenylethylamine as a Co-Carbonization Agent.

Project description:Carbon dots (CDs), as a new type of photoluminescent nanomaterial, have attracted extensive attention in various fields because of their unique luminescence properties. However, CDs will exhibit fluorescence quenching in the solid state or aggregate state, which limits their application. In this paper, a unique strategy is proposed to regulate solutions to achieve multicolour fluorescence of CDs in the solid state. We report the successful preparation of orange, green and blue solid fluorescent CDs using citric acid, urea and phenylethylamine as precursors and methanol, ethanol and water as solvents, respectively. The solid-state fluorescence of CDs may be caused by the linkage of the phenylethyl structure to the surface of CDs during formation, which effectively disperses the CDs and prevents π-π interactions between graphitized nuclei. Meanwhile, multicolour solid fluorescent CDs are realized by adjusting the solvent in the preparation process. Based on the excellent fluorescence properties of CDs, orange, green and blue light-emitting diodes (LEDs) are prepared. A white LED (WLED) can be obtained by mixing the three colours of solid fluorescent CDs, which shows the application potential of CDs in display lighting equipment.

| S-EPMC9569546 | biostudies-literature

Carbon Derived from Pine Needles as a Na+-Storage Electrode Material in Dual-Ion Batteries.

Project description:Pine needles are used as the precursor material to prepare hard carbon. Scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption tests are carried out to characterize the surface, crystal, and pore structure of the material. The pine needle derived carbon (PNC) exhibits excellent Na-ion storage ability. A dual-ion battery of PNC/graphite using a Na+-based organic electrolyte is constructed. The batteries display outstanding electrochemical performance: a superior energy density (200 Wh kg-1 at 131 W kg-1), high cut-off voltage (4.7 V), and outstanding cycling stability (87.2% retention after 1000 cycles). In addition, the separate responses of the cathode and anode are investigated.

| S-EPMC6607337 | biostudies-literature

Intracellular ratiometric temperature sensing using fluorescent carbon dots.

Project description:Highly sensitive non-invasive temperature sensing is critical for studying fundamental biological processes and applications in medical diagnostics. Nanoscale-based thermometers are promising non-invasive probes for precise temperature sensing with subcellular resolution. However, many of these systems have limitations as they rely on fluorescence intensity changes, deconvolution of peaks, or the use of hybrid systems to measure thermal events. To address this, we developed a fluorescence-based ratiometric temperature sensing approach using carbon dots prepared via microwave synthesis. These dots possess dual fluorescence signatures in the blue and red regions of the spectrum. We observed a linear response as a function of temperature in the range of 5-60 °C with a thermal resolution of 0.048 K-1 and thermal sensitivity of 1.97% C-1. Temperature-dependent fluorescence was also observed in HeLa cancer cells over a range of 32-42 °C by monitoring changes in the red-to-blue fluorescence signatures. We demonstrate that the ratiometric approach is superior to intensity-based thermal sensing because it is independent of the intracellular concentration of the optical probe. These findings suggest that dual-emitting carbon dots can be an effective tool for in vitro and possibly in vivo fluorescence nanothermometry.

| S-EPMC9473198 | biostudies-literature

Direct preparation of solid carbon dots by pyrolysis of collagen waste and their applications in fluorescent sensing and imaging.

Project description:The fluorescent carbon dots (CDs) have found their extensive applications in sensing, bioimaging, and photoelectronic devices. In general terms, the synthesis of CDs is straight-forward, though their subsequent purification can be laborious. Therefore, there is a need for easier ways to generate solid CDs with a high conversion yield. Herein, we used collagen waste as a carbon source in producing solid CDs through a calcination procedure without additional chemical decomposition treatment of the raw material. Considering a mass of acid has destroyed the original protein macromolecules into the assembled structure with amino acids and peptide chains in the commercial extraction procedure of collagen product. The residual tissues were assembled with weak intermolecular interactions, which would easily undergo dehydration, polymerization, and carbonization during the heat treatment to produce solid CDs directly. The calcination parameters were surveyed to give the highest conversion yield at 78%, which occurred at 300°C for 2 h. N and S atomic doping CDs (N-CDs and S-CDs) were synthesized at a similar process except for immersion of the collagen waste in sulfuric acid or nitric acid in advance. Further experiments suggested the prepared CDs can serve as an excellent sensor platform for Fe3+ in an acid medium with high anti-interference. The cytotoxicity assays confirmed the biosafety and biocompatibility of the CDs, suggesting potential applications in bioimaging. This work provides a new avenue for preparing solid CDs with high conversion yield.

| S-EPMC9510749 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data