Browse
Submit Data
Databases
API
Help

Dataset Information

43 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Strengthening Cellulose Nanopaper via Deep Eutectic Solvent and Ultrasound-Induced Surface Disordering of Nanofibers.

ABSTRACT: The route for the preparation of cellulose nanofiber dispersions from bacterial cellulose using ethylene glycol- or glycerol-based deep eutectic solvents (DES) is demonstrated. Choline chloride was used as a hydrogen bond acceptor and the effect of the combined influence of DES treatment and ultrasound on the thermal and mechanical properties of bacterial cellulose nanofibers (BC-NFs) is demonstrated. It was found that the maximal Young's modulus (9.2 GPa) is achieved for samples prepared using a combination of ethylene glycol-based DES and ultrasound treatment. Samples prepared with glycerol-based DES combined with ultrasound exhibit the maximal strength (132 MPa). Results on the mechanical properties are discussed based on the structural investigations that were performed using FTIR, Raman, WAXD, SEM and AFM measurements, as well as the determination of the degree of polymerization and the density of BC-NF packing during drying with the formation of paper. We propose that the disordering of the BC-NF surface structure along with the preservation of high crystallinity bulk are the key factors leading to the improved mechanical and thermal characteristics of prepared BC-NF-based papers.

SUBMITTER: Batishcheva EV

PROVIDER: S-EPMC8747671 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pickering Emulsions and Hydrophobized Films of Amphiphilic Cellulose Nanofibers Synthesized in Deep Eutectic Solvent.

Project description:Herein, a dual-functioning deep eutectic solvent system based on triethylmethylammonium chloride and imidazole was harnessed as a swelling agent and a reaction medium for the esterification of cellulose with n-octyl succinic anhydride (OSA). The modified or amphiphilic cellulose nanofibers (ACNFs), synthesized using three different OSA-to-anhydroglucose unit molar ratios (0.5:1, ACNF-1; 1:1, ACNF-2; and 1.5:1, ACNF-3), were further converted into nanofibers with degree of substitution (DS) values of 0.24-0.66. The ACNFs possessed a lateral dimension of 4.24-9.22 nm and displayed surface activity due to the balance of hydrophobic and hydrophilic characteristics. The ACNFs made stable aqueous dispersions; however, the instability index of ACNF-3 (0.51) was higher than those of ACNF-1 (0.29) and ACNF-2 (0.33), which was attributed to the high DS-induced hydrophobicity, causing the instability in water. The amphiphilic nature of ACNFs promoted their performance as stabilizers in oil-in-water Pickering emulsions with average droplet sizes of 4.85 μm (ACNF-1) and 5.48 μm (ACNF-2). Self-standing films of ACNFs showed high contact angles for all the tested DS variants (97.48-114.12°), while their tensile strength was inversely related to DS values (ACNF-1: 115 MPa and ACNF-3: 49.5 MPa). Aqueous dispersions of ACNFs were also tested for coating fruits to increase their shelf life. Coatings improved their shelf life by decreasing oxygen contact and moisture loss.

| S-EPMC10498439 | biostudies-literature

Multifunctional Bacterial Cellulose Films Enabled by Deep Eutectic Solvent-Extracted Lignin.

Project description:Inspired by natural plant cells, lignin is utilized as a filler and a functional agent to modify bacterial cellulose (BC). By mimicking the lignin-carbohydrate structure, deep eutectic solvent (DES)-extracted lignin serves as a glue to strength the BC films and endows the films with diverse functionality. The lignin isolated by the DES (formed by choline chloride and lactic acid) is rich in phenol hydroxyl groups (5.5 mmol/g) and exhibits a narrow molecular weight distribution. A good interface compatibility can be obtained in the composite film, and lignin fills the void/gaps between BC fibrils. The integration of lignin endows the films with enhanced water-proof, mechanical, UV shielding, gas barrier, and antioxidant abilities. The BC/lignin composite film with 0.4 g of lignin addition (BL-0.4) exhibits an oxygen permeability and a water vapor transmission rate of 0.4 mL/m2/day/Pa and 0.9 g/m2/day, respectively. The multifunctional films are promising candidates for packing materials and exhibit a broad application prospect in the field of petroleum-based polymer replacement.

| S-EPMC9979238 | biostudies-literature

Zein nanofibers via deep eutectic solvent electrospinning: tunable morphology with super hydrophilic properties.

Project description:The use of organic solvents for the preparation of nanofibers are challenged due to their volatile and hazardous behavior. Recently deep eutectic solvents (DES) are widely recognized as non-volatile and non-hazardous solvents which never been utilized directly for nanofabrication via electrospinning. Here, we present the preparation of Zein nanofibers using deep eutectic solvents (DES-Zein). The DES-Zein nanofibers were produced at an optimized polymer concentration of 45% (w/w) with pH 7.3 and electroconductivity 233 mS cm-1. DES-Zein nanofibers showed aligned to tweed like cedar leaf morphology tuned by varying the spreading angle from 0° to 90°. In contrast to hydrophobic conventional Zein nanofibers, DES-Zein nanofibers showed super hydrophilic character and about 200 nm finer average diameter. The proposed method of preparing Zein nanofibers using DES opens a new door to continuous electrospinning with tunable morphology, having potential to be used for environmental and biomedical applications.

| S-EPMC7499184 | biostudies-literature

Water-Induced Restructuring of the Surface of a Deep Eutectic Solvent.

Project description:We study the molecular-scale structure of the surface of Reline, a DES made from urea and choline chloride, using heterodyne-detected vibrational sum frequency generation (HD-VSFG). Reline absorbs water when exposed to the ambient atmosphere, and following structure-specific changes at the Reline/air interface is crucial and difficult. For Reline (dry, 0 wt %, w/w, water) we observe vibrational signatures of both urea and choline ions at the surface. Upon increase of the water content, there is a gradual depletion of urea from the surface, an enhanced alignment, and an enrichment of the surface with choline cations, indicating surface speciation of ChCl. Above 40% w/w water content, choline cations abruptly deplete from the surface, as evidenced by the decrease of the vibrational signal of the -CH2- groups of choline and the rapid rise of a water signal. Above 60% w/w water content, the surface spectrum of aqueous Reline becomes indistinguishable from that of neat water.

| S-EPMC8785180 | biostudies-literature

Optimization Ultrasound-Assisted Deep Eutectic Solvent Extraction of Anthocyanins from Raspberry Using Response Surface Methodology Coupled with Genetic Algorithm.

Project description:Raspberries have been reported to contain abundant anthocyanins and other active compounds. To extract anthocyanins from raspberries more efficiently, a novel procedure of ultrasound-assisted deep eutectic solvent extraction (UADESE) was proposed in this paper. The extraction process was optimized by response surface methodology coupled with a genetic algorithm. The optimum extraction parameters to achieve the highest yield of anthocyanins 1.378 ± 0.009 mg/g from raspberry powder via UADESE were obtained at a water content of 29%, ultrasonic power of 210 W, extraction temperature of 51 °C and extraction time of 32 min. The AB-8 macroporous resin combined with the high-speed counter current chromatography (HSCCC) method were further used to isolate and purify the anthocyanins extracts obtained under optimum extraction conditions, and the structure of purified anthocyanins components were identified by UV-Visible spectrophotometer (UV-Vis), high-performance liquid chromatography (HPLC), high-performance liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS/MS), 1H nuclear magnetic resonance (NMR) and 13C-NMR spectra. The two anthocyanins (cyanidin-3-glucoside with a purity of 92.25% and cyanidin-3-rutinoside with a purity of 93.07%) identified were consistent with those present in raspberries. These findings provided an effective and feasible method for extraction, isolation and purification of anthocyanins from natural plant resources.

| S-EPMC7599779 | biostudies-literature

Spinning Approach for Cellulose Fiber Yarn Using a Deep Eutectic Solvent and an Inclined Channel.

Project description:We developed a spinning approach for a dope produced by treating softwood pulp with a deep eutectic solvent (DES). The DES enables formation of a sufficiently viscous spinnable gel-like suspension of fibers, which solidifies upon the removal of the DES. This solidification, however, requires a longer time compared to most conventional wet spinning processes. Consequently, the continuity of the spinning process has been constrained in previous work. Moreover, the ability to draw the incipient yarn to increase orientation has been limited. Here we present a continuous spinning approach where the fiber yarn properties and processability can be improved using an inclined channel. A combination of an air gap and an inclined ethanol stream transports and draws the incipient fiber yarn during spinning. The influence of syringe tip diameter, angle of the channel, ethanol flow rate, and twisting were studied experimentally. The improvements in the spinning process resulted in an increase in load bearing capability and ability to reduce the linear density of the fiber yarn.

| S-EPMC6709781 | biostudies-literature

Hydrolysis of regenerated cellulose from ionic liquids and deep eutectic solvent over sulfonated carbon catalysts.

Project description:The efficient hydrolysis of cellulose into its monomer unit such as glucose or valuable cello-oligosaccharides is the critical step for the cost-effective production of biofuels and biochemicals. However, the current cellulose hydrolysis process involves high energy-demanding pretreatment (e.g., ball-milling) and long reaction times (>24 h). Herein, we investigated the feasibility of the dissolution/regeneration (DR) of cellulose in ionic liquids (ILs) and deep eutectic solvent (DES) as an alternative to ball-milling pretreatment for the effective hydrolysis of cellulose. Because chlorine-based solvents were reported to be the most active for cellulose pretreatment, [EMIM]Cl and [DMIM]DMP were selected as the IL molecules, and choline chloride-lactic acid and choline chloride-imidazole were selected as the DES molecules. The level of the crystallinity reduction of the regenerated cellulose were analyzed using XRD and SEM measurements. The hydrolysis kinetics of the regenerated cellulose from ILs and DES were examined at 150 °C using sulfonated carbon catalysts and compared with those of the ball-milled cellulose. Overall, the cellulose pretreatment using the ILs and the DES had superior kinetics for cellulose hydrolysis to the conventional ball milling treatment, suggesting a possibility to replace the current high energy-demanding ball-milling process with the energy-saving DR process. In addition, the utilization of supercritical carbon dioxide-induced carbonic acid as an in situ acid catalyst for the enhanced hydrolysis of cellulose was presented for the first time.

| S-EPMC10009878 | biostudies-literature

Optimizing Ultrasound-Assisted Deep Eutectic Solvent Extraction of Bioactive Compounds from Chinese Wild Rice.

Project description:In this study, deep eutectic solvents (DESs) were used for the ultrasound-assisted extraction (UAE) of valuable bioactive compounds from Chinese wild rice (Zizania spp.). To this end, 7 different choline chloride (CC)-based DESs were tested as green extraction solvents. Choline chloride/1,4-butanediol (DES-2) exhibited the best extraction efficiency in terms of parameters such as the total flavonoid content (TFC), total phenolic content (TPC), and free radical scavenging capacity (DPPH● and ABTS●+). Subsequently, the UAE procedure using 76.6% DES-2 was also optimized: An extraction temperature of 51.2 °C and a solid-liquid ratio of 37.0 mg/mL were considered optimal by a Box-Behnken experiment. The optimized extraction procedure proved efficient for the extraction of 9 phenolic and 3 flavonoid compounds from Chinese wild rice as determined by quantification based on ultra-performance liquid chromatography-triple quadrupole tandem mass spectrometry (UPLC-QqQ-MS). This work, thus, demonstrates the possibility of customizing green solvents that offer greater extraction capacity than that of organic solvents.

| S-EPMC6696331 | biostudies-literature

Removal of Copper Corrosion Products by Using Green Deep Eutectic Solvent and Bio-Derivative Cellulose Membrane.

Project description:A safe and environmentally friendly material for corrosion removal from metals is proposed in this article. Electrochemically corroded copper was selected as a target material, and a deep eutectic solvent (DES) composed of choline chloride and ascorbic acid, in a molar ratio of 2:1, was developed to this end. Aqueous solutions of the DES with a concentration above 70 wt% were found to be effective in the dissolution of patina and less aggressive towards other materials such as CaCO3, which is the main component of limestone. These concentrated DES solutions were integrated with either cotton swabs or cellulose-based membranes and used for the cleaning of electrochemically corroded copper. The membrane containing 80 wt% DES aqueous solution exhibited the most desirable cleaning ability in terms of speed and area selectivity. X-ray diffraction analysis of the corroded copper before and after the application of the membrane was performed to demonstrate the successful corrosion removal.

| S-EPMC9182783 | biostudies-literature

Sustainable conversion of cottonseed hulls to valuable proanthocyanidins through ultrasound-assisted deep eutectic solvent extraction.

Project description:This study presents a novel approach for converting cottonseed hulls (CSHs) into valuable proanthocyanidins (PAs) through deep eutectic solvent (DES)-based ultrasound-assisted extraction (UAE-DES). Response surface methodology (RSM) was applied to optimize and model this process, resulting in maximum yields of 78.58 mg/g. The ideal PA extraction conditions were determined to be a liquid-to-material ratio of 36.25 mL/g, a water content of 33.21%, and an extraction period of 7.4 min. Molecular dynamic simulations (MDS) were performed to study the interactions between the solvent and target chemicals. Increased van der Waals forces and stronger interactions between DES and the target chemical catechin (CA) compared to those observed with methanol or water were observed. Furthermore, the optimized extract exhibited a higher PA content than can be obtained with conventional extraction methods and demonstrated antioxidant activity in vitro. The cottonseed hulls residues (CSRs) remaining after the extraction process can be used to produce activated carbon (ACCSR), which has some capacity to adsorb methylene blue (MB) contaminants. This study offers a reference for the fruitful transformation of waste biomass into high-value products.

| S-EPMC10520932 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data