Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics.

ABSTRACT: Cost management and toxic waste generation are two key issues that must be addressed before the commercialization of perovskite optoelectronic devices. We report a groundbreaking strategy for eco-friendly and cost-effective fabrication of highly efficient perovskite solar cells. This strategy involves the usage of a high volatility co-solvent, which dilutes perovskite precursors to a lower concentration (<0.5 M) while retaining similar film quality and device performance as a high concentration (>1.4 M) solution. More than 70% of toxic waste and material cost can be reduced. Mechanistic insights reveal ultra-rapid evaporation of the co-solvent together with beneficial alteration of the precursor colloidal chemistry upon dilution with co-solvent, which in-situ studies and theoretical simulations confirm. The co-solvent tuned precursor colloidal properties also contribute to the enhancement of the stability of precursor solution, which extends its processing window thus minimizing the waste. This strategy is universally successful across different perovskite compositions, and scales from small devices to large-scale modules using industrial spin-coating, potentially easing the lab-to-fab translation of perovskite technologies.

SUBMITTER: Zhang H

PROVIDER: S-EPMC8748698 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

The levelized cost of electricity from perovskite photovoltaics.

Project description:The levelized cost of electricity (LCOE) is a techno-economic analysis that evaluates the cost potential of any electricity-producing technology. LCOE represents a powerful metric to compare the most efficient renewable resources in the framework of the energy transition. Perovskite solar cells (PSCs) are an emerging technology with great potential to establish a leading position in the photovoltaic (PV) market, particularly in those regions that cannot rely on crystalline silicon manufacturing. However, like many emerging technologies, their positioning in the PV market is still quite speculative. Here, we revise the different models to evaluate the LCOE of PSCs, paying attention to the impact of performance, stability, and manufacturing costs. We consider the difference in performances from lab-record devices to modules fabricated in industrial production lines. We identify the key role of the degradation that is hindering the commercialization of PSCs and we analyze the manufacturing cost and the supply chain availability. From our analysis, we restricted the LCOE to 3-6 cents (USD) per kWh, which is competitive with the best of the mainstream silicon technologies (passivated emitter and rear contact, PERC). In conclusion, we highlight the future challenges to refine the LCOE calculations, including temperature effects.

| S-EPMC9932852 | biostudies-literature

Nanoscale interfacial engineering enables highly stable and efficient perovskite photovoltaics.

Project description:We present a facile molecular-level interface engineering strategy to augment the long-term operational and thermal stability of perovskite solar cells (PSCs) by tailoring the interface between the perovskite and hole transporting layer (HTL) with a multifunctional ligand 2,5-thiophenedicarboxylic acid. The solar cells exhibited high operational stability (maximum powering point tracking at one sun illumination) with a stabilized T S80 (the time over which the device efficiency reduces to 80% after initial burn-in) of ≈5950 h at 40 °C and a stabilized power conversion efficiency (PCE) over 23%. The origin of high device stability and performance is correlated to the nano/sub-nanoscale molecular level interactions between ligand and perovskite layer, which is further corroborated by comprehensive multiscale characterization. These results provide insights into the modulation of the grain boundaries, local density of states, surface bandgap, and interfacial recombination. Chemical analysis of aged devices showed that molecular passivation suppresses interfacial ion diffusion and inhibits the photoinduced I2 release that irreversibly degrades the perovskite. The interfacial engineering strategies enabled by multifunctional ligands can expedite the path towards stable PSCs.

| S-EPMC8513747 | biostudies-literature

Novel Solvent-free Perovskite Deposition in Fabrication of Normal and Inverted Architectures of Perovskite Solar Cells.

Project description:We introduced a new approach to deposit perovskite layer with no need for dissolving perovskite precursors. Deposition of Solution-free perovskite (SFP) layer is a key method for deposition of perovskite layer on the hole or electron transport layers that are strongly sensitive to perovskite precursors. Using deposition of SFP layer in the perovskite solar cells would extend possibility of using many electron and hole transport materials in both normal and invert architectures of perovskite solar cells. In the present work, we synthesized crystalline perovskite powder followed by successful deposition on TiO2 and cuprous iodide as the non-sensitve and sensitive charge transport layers to PbI2 and CH3NH3I solution in DMF. The post compressing step enhanced the efficiency of the devices by increasing the interface area between perovskite and charge transport layers. The 9.07% and 7.71% cell efficiencies of the device prepared by SFP layer was achieved in respective normal (using TiO2 as a deposition substrate) and inverted structure (using CuI as deposition substrate) of perovskite solar cell. This method can be efficient in large-scale and low cost fabrication of new generation perovskite solar cells.

| S-EPMC5027556 | biostudies-literature

A facile and low-cost micro fabrication material: flash foam.

Project description:Although many microfabrication methods have been reported, the preliminary replication templates used in most microfabrication still depend on the expensive and long-period photolithography. This paper explores an alternative replication templates based on a daily used material, flash foam (FF), and proposes a facile microfabrication method, flash foam stamp lithography (FFSL). When FF is exposed with a desired pattern mask, the negative of the pattern is transferred to its surface and micro structures are formed due to the shrinkage of the exposed area. As FF is commonly used in personal stamps, FFSL is very simple and cost-effective. In this paper, we demonstrated that FF is a good and low-cost template for many micro fabrication methods, such as micro casting and soft lithography. Thus, designing and fabricating micro structures at personal office immediately become possible with FFSL. Furthermore, we demonstrated that multi-scale micro structures can be easily fabricated by double exposure with FFSL. Skin textures is used as another case to demonstrate that FFSL can fabricate structures with different depth in a single exposure. As a result, FF shows a promising future in biology, and analytical chemistry, such as rapid fabrication of point of care diagnostics and microfluidic analytical devices with low cost.

| S-EPMC4551987 | biostudies-literature

Dielectric screening in perovskite photovoltaics.

Project description:The performance of perovskite photovoltaics is fundamentally impeded by the presence of undesirable defects that contribute to non-radiative losses within the devices. Although mitigating these losses has been extensively reported by numerous passivation strategies, a detailed understanding of loss origins within the devices remains elusive. Here, we demonstrate that the defect capturing probability estimated by the capture cross-section is decreased by varying the dielectric response, producing the dielectric screening effect in the perovskite. The resulting perovskites also show reduced surface recombination and a weaker electron-phonon coupling. All of these boost the power conversion efficiency to 22.3% for an inverted perovskite photovoltaic device with a high open-circuit voltage of 1.25 V and a low voltage deficit of 0.37 V (a bandgap ~1.62 eV). Our results provide not only an in-depth understanding of the carrier capture processes in perovskites, but also a promising pathway for realizing highly efficient devices via dielectric regulation.

| S-EPMC8087789 | biostudies-literature

Proton Radiation Hardness of Perovskite Tandem Photovoltaics.

Project description:Monolithic [Cs0.05(MA0. 17FA0. 83)0.95]Pb(I0.83Br0.17)3/Cu(In,Ga)Se2 (perovskite/CIGS) tandem solar cells promise high performance and can be processed on flexible substrates, enabling cost-efficient and ultra-lightweight space photovoltaics with power-to-weight and power-to-cost ratios surpassing those of state-of-the-art III-V semiconductor-based multijunctions. However, to become a viable space technology, the full tandem stack must withstand the harsh radiation environments in space. Here, we design tailored operando and ex situ measurements to show that perovskite/CIGS cells retain over 85% of their initial efficiency even after 68 MeV proton irradiation at a dose of 2 × 1012 p+/cm2. We use photoluminescence microscopy to show that the local quasi-Fermi-level splitting of the perovskite top cell is unaffected. We identify that the efficiency losses arise primarily from increased recombination in the CIGS bottom cell and the nickel-oxide-based recombination contact. These results are corroborated by measurements of monolithic perovskite/silicon-heterojunction cells, which severely degrade to 1% of their initial efficiency due to radiation-induced recombination centers in silicon.

| S-EPMC7238692 | biostudies-literature

Facile Fabrication of Self-Assembly Functionalized Polythiophene Hole Transporting Layer for High Performance Perovskite Solar Cells.

Project description:Crystallinity and crystal orientation have a predominant impact on a materials' semiconducting properties, thus it is essential to manipulate the microstructure arrangements for desired semiconducting device performance. Here, ultra-uniform hole-transporting material (HTM) by self-assembling COOH-functionalized P3HT (P3HT-COOH) is fabricated, on which near single crystal quality perovskite thin film can be grown. In particular, the self-assembly approach facilitates the P3HT-COOH molecules to form an ordered and homogeneous monolayer on top of the indium tin oxide (ITO) electrode facilitate the perovskite crystalline film growth with high quality and preferred orientations. After detailed spectroscopy and device characterizations, it is found that the carboxylic acid anchoring groups can down-shift the work function and passivate the ITO surface, retarding the interface carrier recombination. As a result, the device made with the self-assembled HTM show high open-circuit voltage over 1.10 V and extend the lifetime over 4,300 h when storing at 30% relative humidity. Moreover, the cell works efficiently under much reduced light power, making it useful as power source under dim-light conditions. The demonstration suggests a new facile way of fabricating monolayer HTM for high efficiency perovskite devices, as well as the interconnecting layer needed for tandem cell.

| S-EPMC7927620 | biostudies-literature

Reduced-dimensional perovskite photovoltaics with homogeneous energy landscape.

Project description:Reduced-dimensional (quasi-2D) perovskite materials are widely applied for perovskite photovoltaics due to their remarkable environmental stability. However, their device performance still lags far behind traditional three dimensional perovskites, particularly high open circuit voltage (Voc) loss. Here, inhomogeneous energy landscape is pointed out to be the sole reason, which introduces extra energy loss, creates band tail states and inhibits minority carrier transport. We thus propose to form homogeneous energy landscape to overcome the problem. A synergistic approach is conceived, by taking advantage of material structure and crystallization kinetic engineering. Accordingly, with the help of density functional theory guided material design, (aminomethyl) piperidinium quasi-2D perovskites are selected. The lowest energy distribution and homogeneous energy landscape are achieved through carefully regulating their crystallization kinetics. We conclude that homogeneous energy landscape significantly reduces the Shockley-Read-Hall recombination and suppresses the quasi-Fermi level splitting, which is crucial to achieve high Voc.

| S-EPMC7125147 | biostudies-literature

Facile Fabrication of Self-Similar Hierarchical Micro-Nano Structures for Multifunctional Surfaces via Solvent-Assisted UV-Lasering.

Project description:Cross-scale self-similar hierarchical micro-nano structures in living systems often provide unique features on surfaces and serve as inspiration sources for artificial materials or devices. For instance, a highly self-similar structure often has a higher fractal dimension and, consequently, a larger active surface area; hence, it would have a super surface performance compared to its peer. However, artificial self-similar surfaces with hierarchical micro-nano structures and their application development have not yet received enough attention. Here, by introducing solvent-assisted UV-lasering, we establish an elegant approach to fabricate self-similar hierarchical micro-nano structures on silicon. The self-similar structure exhibits a super hydrophilicity, a high light absorbance (>90%) in an ultra-broad spectrum (200-2500 nm), and an extraordinarily high efficiency in heat transfer. Through further combinations with other techniques, such surfaces can be used for capillary assembling soft electronics, surface self-cleaning, and so on. Furthermore, such an approach can be transferred to other materials with minor modifications. For instance, by doping carbon in polymer matrix, a silicone surface with hierarchical micro-nano structures can be obtained. By selectively patterning such hierarchical structures, we obtained an ultra-high sensitivity bending sensor. We believe that such a fabrication technique of self-similar hierarchical micro-nano structures may encourage researchers to deeply explore the unique features of functional surfaces with such structures and to further discover their potentials in various applications in diverse directions.

| S-EPMC7407878 | biostudies-literature

A universal and cost-effective method for general and specific RNA-protein complex isolation_RBPome

Project description:The establishment of a protocol isolating specific RNPs by combining a total RNP isolation with an antisense probe-mediated specific RNP isolation

2023-05-10 | PXD031578 | Pride

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data