Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultra-low threshold lasing through phase front engineering via a metallic circular aperture.

ABSTRACT: Semiconductor lasers with extremely low threshold power require a combination of small volume active region with high-quality-factor cavities. For ridge lasers with highly reflective coatings, an ultra-low threshold demands significantly suppressing the diffraction loss at the facets of the laser. Here, we demonstrate that introducing a subwavelength aperture in the metallic highly reflective coating of a laser can correct the phase front, thereby counter-intuitively enhancing both its modal reflectivity and transmissivity at the same time. Theoretical and experimental results manifest a decreasing in the mirror loss by over 40% and an increasing in the transmissivity by 10⁴. Implementing this method on a small-cavity quantum cascade laser, room-temperature continuous-wave lasing operation at 4.5 μm wavelength with an electrical consumption power of only 143 mW is achieved. Our work suggests possibilities for future portable applications and can be implemented in a broad range of optoelectronic systems.

SUBMITTER: Wang Z

PROVIDER: S-EPMC8752788 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Heterostructure and Q-factor engineering for low-threshold and persistent nanowire lasing.

Project description:Continuous room temperature nanowire lasing from silicon-integrated optoelectronic elements requires careful optimisation of both the lasing cavity Q-factor and population inversion conditions. We apply time-gated optical interferometry to the lasing emission from high-quality GaAsP/GaAs quantum well nanowire laser structures, revealing high Q-factors of 1250?±?90 corresponding to end-facet reflectivities of R?=?0.73?±?0.02. By using optimised direct-indirect band alignment in the active region, we demonstrate a well-refilling mechanism providing a quasi-four-level system leading to multi-nanosecond lasing and record low room temperature lasing thresholds (~6??J?cm-2?pulse-1) for III-V nanowire lasers. Our findings demonstrate a highly promising new route towards continuously operating silicon-integrated nanolaser elements.

| S-EPMC7078256 | biostudies-literature

Quantum Dot Self-Assembly Enables Low-Threshold Lasing.

Project description:Perovskite quantum dots (QDs) are of interest for solution-processed lasers; however, their short Auger lifetime has limited lasing operation principally to the femtosecond temporal regime the photoexcitation levels to achieve optical gain threshold are up to two orders of magnitude higher in the nanosecond regime than in the femtosecond. Here the authors report QD superlattices in which the gain medium facilitates excitonic delocalization to decrease Auger recombination and in which the macroscopic dimensions of the structures provide the optical feedback required for lasing. The authors develope a self-assembly strategy that relies on sodiumd-an assembly director that passivates the surface of the QDs and induces self-assembly to form ordered three-dimensional cubic structures. A density functional theory model that accounts for the attraction forces between QDs allows to explain self-assembly and superlattice formation. Compared to conventional organic-ligand-passivated QDs, sodium enables higher attractive forces, ultimately leading to the formation of micron-length scale structures and the optical faceting required for feedback. Simultaneously, the decreased inter-dot distance enabled by the new ligand enhances exciton delocalization among QDs, as demonstrated by the dynamically red-shifted photoluminescence. These structures function as the lasing cavity and the gain medium, enabling nanosecond-sustained lasing with a threshold of 25 µJ cm-2 .

| S-EPMC8529423 | biostudies-literature

Ultra-low threshold polariton lasing at room temperature in a GaN membrane microcavity with a zero-dimensional trap.

Project description:Polariton lasers are coherent light sources based on the condensation of exciton-polaritons in semiconductor microcavities, which occurs either in the kinetic or thermodynamic (Bose-Einstein) regime. Besides their fundamental interest, polariton lasers have the potential of extremely low operating thresholds. Here, we demonstrate ultra-low threshold polariton lasing at room temperature, using an all-dielectric, GaN membrane-based microcavity, with a spontaneously-formed zero-dimensional trap. The microcavity is fabricated using an innovative method, which involves photo-electrochemical etching of an InGaN sacrificial layer and allows for the incorporation of optimally-grown GaN active quantum wells inside a cavity with atomically-smooth surfaces. The resulting structure presents near-theoretical Q-factors and pronounced strong-coupling effects, with a record-high Rabi splitting of 64?meV at room-temperature. Polariton lasing is observed at threshold carrier densities 2.5 orders of magnitude lower than the exciton saturation density. Above threshold, angle-resolved emission spectra reveal an ordered pattern in k-space, attributed to polariton condensation at discrete levels of a single confinement site. This confinement mechanism along with the high material and optical quality of the microcavity, accounts for the enhanced performance of our polariton laser, and pave the way for further developments in the area of robust room temperature polaritonic devices.

| S-EPMC5514101 | biostudies-literature

Low threshold lasing emissions from a single upconversion nanocrystal.

Project description:Cross-relaxation among neighboring emitters normally causes self-quenching and limits the brightness of luminescence. However, in nanomaterials, cross-relaxation could be well-controlled and employed for increasing the luminescence efficiency at specific wavelengths. Here we report that cross-relaxation can modulate both the brightness of single upconversion nanoparticles and the threshold to reach population inversion, and both are critical factors in producing the ultra-low threshold lasing emissions in a micro cavity laser. By homogenously coating a 5-μm cavity with a single layer of nanoparticles, we demonstrate that doping Tm3+ ions at 2% can facilitate the electron accumulation at the intermediate state of 3H4 level and efficiently decrease the lasing threshold by more than one order of magnitude. As a result, we demonstrate up-converted lasing emissions with an ultralow threshold of continuous-wave excitation of ~150 W/cm2 achieved at room temperature. A single nanoparticle can lase with a full width at half-maximum as narrow as ~0.45 nm.

| S-EPMC7708641 | biostudies-literature

Low-threshold optically pumped lasing in highly strained germanium nanowires.

Project description:The integration of efficient, miniaturized group IV lasers into CMOS architecture holds the key to the realization of fully functional photonic-integrated circuits. Despite several years of progress, however, all group IV lasers reported to date exhibit impractically high thresholds owing to their unfavourable bandstructures. Highly strained germanium with its fundamentally altered bandstructure has emerged as a potential low-threshold gain medium, but there has yet to be a successful demonstration of lasing from this seemingly promising material system. Here we demonstrate a low-threshold, compact group IV laser that employs a germanium nanowire under a 1.6% uniaxial tensile strain as the gain medium. The amplified material gain in strained germanium can sufficiently overcome optical losses at 83?K, thus allowing the observation of multimode lasing with an optical pumping threshold density of ~3.0?kW?cm-2. Our demonstration opens new possibilities for group IV lasers for photonic-integrated circuits.

| S-EPMC5705600 | biostudies-literature

Extreme ultra-low lasing threshold of full-polymeric fundamental microdisk printed with room-temperature atmospheric ink-jet technique.

Project description:We experimentally demonstrated an extreme ultra-low lasing threshold from full-polymeric fundamental microdisk cavities fabricated by a novel fabrication method, the ink-jet printing method, which is much simpler and easier than previous methods such as lithography. The ink-jet printing method provides additive, room-temperature atmospheric, rapid fabrication with only two steps: (i) stacking cladding pedestal and waveguiding disk spots using the ink-jet technique, and (ii) partial etching of the cladding pedestal envelope. Two kinds of low-viscosity polymers successfully formed microdisks with high surface homogeneity, and one of the polymers doped with LDS798 dye yielded whispering-gallery-mode lasing. The fundamental disks exhibited an extremely ultra-low lasing threshold of 0.33 μJ/mm(2) at a wavelength of 817.3 nm. To the best of our knowledge, this lasing threshold is the lowest threshold obtained among both organic and inorganic fundamental microdisk cavity lasers with a highly confined structure.

| S-EPMC4448547 | biostudies-other

Strongly linearly polarized low threshold lasing of all organic photonic quasicrystals.

Project description:Lasing is obtained from a two-dimensional (2D) Penrose photonic quasicrystal made of a low index contrast material of holographic polymer dispersed liquid crystals (H-PDLCs) that enables a substantial reduction in the optical pumping threshold. This lasing architecture further allows for excellent linear polarization characteristics as well as wide directional dependence. The pumping threshold is fivefold lower than that obtained from the 2D defect-free photonic crystals fabricated under similar conditions. These properties make H-PDLC photonic quasicrystal promising for a new type of all organic miniature lasers.

| S-EPMC3432992 | biostudies-literature

Enhancing monolayer photoluminescence on optical micro/nanofibers for low-threshold lasing.

Project description:Although monolayer transition metal dichalcogenides (TMDs) have direct bandgaps, the low room-temperature photoluminescence quantum yields (QYs), especially under high pump intensity, limit their practical applications. Here, we use a simple photoactivation method to enhance the room-temperature QYs of monolayer MoS2 grown on to silica micro/nanofibers by more than two orders of magnitude in a wide pump dynamic range. The high-density oxygen dangling bonds released from the tapered micro/nanofiber surface are the key to this strong enhancement of QYs. As the pump intensity increases from 10-1 to 104 W cm-2, our photoactivated monolayer MoS2 exhibits QYs from ~30 to 1% while maintaining high environmental stability, allowing direct lasing with greatly reduced thresholds down to 5 W cm-2. Our strategy can be extended to other TMDs and offers a solution to the most challenging problem toward the realization of efficient and stable light emitters at room temperature based on these atomically thin materials.

| S-EPMC6874480 | biostudies-literature

Low-Threshold and High Intensity Random Lasing Enhanced by MnCl₂.

Project description:Energy transfer is known to have a significant influence on random lasers. However, the study about the effect of energy transfer between metallic salt and dye molecules on random lasers is still lacking at present. Here, we investigate random lasing actions in Pyrromethene-597 (PM597), PM597-doped MnCl₂ (manganese (II) chloride), PM597-doped polymer-dispersed liquid crystal (PDLC) and PM597-doped PDLC with MnCl₂ capillary systems. We find that random lasing of the systems with MnCl₂ exhibits lower threshold, higher intensity, sharper peak and variable resonance wavelength in comparison with the systems without MnCl₂. This behavior is closely related to the decrease of fluorescence quenching effect and the enhancement of local field induced by energy transfer between MnCl₂ and PM597. Red-shift of wavelength is observed with increasing dosage concentration of MnCl₂ in the PM597-doped PDLC with MnCl₂ system. Through the analysis of single-shot emission spectra of PM597-doped PDLC without and with MnCl₂ systems, the role of MnCl₂ in the coupling of lasing modes is confirmed. Lengths of laser oscillation cavities of the PM597-doped PDLC without and with MnCl₂ systems are calculated by a power Fourier transform (PFT) analysis of their emission spectra. It well accounts for the effect of MnCl₂ on the variation of the oscillation cavity.

| S-EPMC5457082 | biostudies-other

Room-Temperature Low-Threshold Lasing from Monolithically Integrated Nanostructured Porous Silicon Hybrid Microcavities.

Project description:Silicon photonics would strongly benefit from monolithically integrated low-threshold silicon-based laser operating at room temperature, representing today the main challenge toward low-cost and power-efficient electronic-photonic integrated circuits. Here we demonstrate low-threshold lasing from fully transparent nanostructured porous silicon (PSi) monolithic microcavities (MCs) infiltrated with a polyfluorene derivative, namely, poly(9,9-di- n-octylfluorenyl-2,7-diyl) (PFO). The PFO-infiltrated PSiMCs support single-mode blue lasing at the resonance wavelength of 466 nm, with a line width of ∼1.3 nm and lasing threshold of 5 nJ (15 μJ/cm2), a value that is at the state of the art of PFO lasers. Furthermore, time-resolved photoluminescence shows a significant shortening (∼57%) of PFO emission lifetime in the PSiMCs, with respect to nonresonant PSi reference structures, confirming a dramatic variation of the radiative decay rate due to a Purcell effect. Our results, given also that blue lasing is a worst case for silicon photonics, are highly appealing for the development of low-cost, low-threshold silicon-based lasers with wavelengths tunable from visible to the near-infrared region by simple infiltration of suitable emitting polymers in monolithically integrated nanostructured PSiMCs.

| S-EPMC6504192 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data