Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Technoeconomic Evaluation of the Industrial Implementation of Catalytic Direct Nonoxidative Methane Coupling.

ABSTRACT: This paper presents a process design for catalytic nonoxidative natural gas conversion to olefins and aromatics, highlighting the opportunities and challenges concerning industrial implementation. The optimal reactor conditions are 5 bar and 1000 °C. Heat exchange over the reactor is challenging due to the high temperature and low gas pressure. Recovery of ethylene is economically unattractive due to the low ethylene concentration in the product stream, leading to a methane-to-aromatics process, recycling ethylene. Benzene is the most valuable product at an efficiency of 0.31 kg_benzene/kg_methane with hydrogen as a major valuable byproduct. Naphthalene, with a low value, is unfortunately the dominant product, at 0.52 kg_naphthalene/kg_methane. It is suggested to hydrocrack the naphthalene to more valuable BTX products in an additional downstream process. The process is calculated to result in a 107 $ profit per ton CH₄.

SUBMITTER: Postma RS

PROVIDER: S-EPMC8759068 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Highly Efficient and Selective Photocatalytic Nonoxidative Coupling of Methane to Ethylene over Pd-Zn Synergistic Catalytic Sites.

Project description:Photocatalytic nonoxidative coupling of CH4 to multicarbon (C2+) hydrocarbons (e.g., C2H4) and H2 under ambient conditions provides a promising energy-conserving approach for utilization of carbon resource. However, as the methyl intermediates prefer to undergo self-coupling to produce ethane, it is a challenging task to control the selective conversion of CH4 to higher value-added C2H4. Herein, we adopt a synergistic catalysis strategy by integrating Pd-Zn active sites on visible light-responsive defective WO3 nanosheets for synergizing the adsorption, activation, and dehydrogenation processes in CH4 to C2H4 conversion. Benefiting from the synergy, our model catalyst achieves a remarkable C2+ compounds yield of 31.85 μmol·g-1·h-1 with an exceptionally high C2H4 selectivity of 75.3% and a stoichiometric H2 evolution. In situ spectroscopic studies reveal that the Zn sites promote the adsorption and activation of CH4 molecules to generate methyl and methoxy intermediates with the assistance of lattice oxygen, while the Pd sites facilitate the dehydrogenation of methoxy to methylene radicals for producing C2H4 and suppress overoxidation. This work demonstrates a strategy for designing efficient photocatalysts toward selective coupling of CH4 to higher value-added chemicals and highlights the importance of synergistic active sites to the synergy of key steps in catalytic reactions.

| S-EPMC9680520 | biostudies-literature

Plasma-Catalysis of Nonoxidative Methane Coupling: A Dynamic Investigation of Plasma and Surface Microkinetics over Ni(111).

Project description:A heterogeneous catalytic microkinetic model is developed and implemented in a zero-dimensional (0D) plasma model for the dynamic study of methane nonoxidative coupling over Ni(111) at residence times and power densities consistent with experimental reactors. The microkinetic model is thermodynamically consistent and is parameterized based on the heats of chemisorption of surface species on Ni(111). The surface network explicitly accounts for the interactions of plasma species, namely, molecules, radicals, and vibrationally excited states, with the catalyst active sites via adsorption and Eley-Rideal reactions. The Fridman-Macheret model is used to describe the enhancement of the rate of the dissociative adsorption of vibrationally excited CH4, H2, and C2H6. In combination with a previously developed detailed kinetic scheme for nonthermal methane plasma, 0D simulation results bring insights into the complex dynamic interactions between the plasma phase and the catalyst during methane nonoxidative coupling. Differential turnover frequencies achieved by plasma-catalysis are higher than those of equivalent plasma-only and catalysis-only simulations combined; however, this performance can only be sustained momentarily. Hydrogen produced from dehydrogenation of ethane via electron collisions within the plasma is found to quickly saturate the surface and even promote the conversion of surface CH3* back to methane.

| S-EPMC9720725 | biostudies-literature

Direct catalytic cross-coupling of alkenyllithium compounds.

Project description:A catalytic method for the direct cross-coupling of alkenyllithium reagents with aryl and alkenyl halides is described. The use of a catalyst comprising Pd2(dba)3/XPhos allows for the stereoselective preparation of a wide variety of substituted alkenes in high yields under mild conditions. In addition (1-ethoxyvinyl)lithium can be efficiently converted into substituted vinyl ethers which, after hydrolysis, give readily access to the corresponding methyl ketones in a one pot procedure.

| S-EPMC5811103 | biostudies-literature

Effect of ethane and ethylene on catalytic non oxidative coupling of methane.

Project description:The effect of addition of ethane and ethylene (C2) on methane coupling at 1000 °C was investigated. A Fe/SiO2 catalyst was used to determine the contributions of catalytic as well as C2 initiated methane activation. The catalyst load as well as the residence times at 1000 °C downstream of the catalyst bed were varied. C2 addition significantly increases methane conversion rates, similarly for both ethane and ethylene, although ethylene is more effective when operating with long residence times in the post-catalytic volume. Methane activation via C2 addition proceeds dominantly in the gas-phase whereas catalytic C2 activation is negligible. The catalyst has no effect on methane conversion when the feed contains more than 2 vol% C2. Product selectivity distribution as well as total hydrocarbon yield at 10% conversion is not influenced by C2 addition, but is influenced by the amount of catalyst as well as residence time in the post-catalytic volume at high temperature. It is proposed that C2 impurities in natural gas change from a nuisance to an advantage by enhancing methane conversion and simplifying purification of the natural gas feed. A process is proposed in which ethylene is recycled back into the reactor to initiate methane coupling, leading to a process converting methane to aromatics.

| S-EPMC8612220 | biostudies-literature

Direct Coupling of Methane and Carbon Dioxide on Tantalum Cluster Cations.

Project description:Understanding molecular-scale reaction mechanisms is crucial for the design of modern catalysts with industrial prospect. Through joint experimental and computational studies, we investigate the direct coupling reaction of CH4 and CO2 , two abundant greenhouse gases, mediated by Ta1,4 + ions to form larger oxygenated hydrocarbons. Coherent with proposed elementary steps, we expose products of CH4 dehydrogenation [Ta1,4 CH2 ]+ to CO2 in a ring electrode ion trap. Product analysis and reaction kinetics indicate a predisposition of the tetramers for C-O coupling with a conversion to products of CH2 O, whereas atomic cations enable C-C coupling yielding CH2 CO. Selected experimental findings are supported by thermodynamic computations, connecting structure, electronic properties, and catalyst function. Moreover, the study of bare Ta1,4 + compounds indicates that methane dehydrogenation is a significant initial step in the direct coupling reaction, enabling new, yet unknown reaction pathways.

| S-EPMC10107500 | biostudies-literature

Secondary amines as coupling partners in direct catalytic asymmetric reductive amination.

Project description:The secondary amine participating asymmetric reductive amination remains an unsolved problem in organic synthesis. Here we show for the first time that secondary amines are capable of effectively serving as N-sources in direct asymmetric reductive amination to afford corresponding tertiary chiral amines with the help of a selected additive set under mild conditions (0-25 °C). The applied chiral phosphoramidite ligands are readily prepared from BINOL and easily modified. Compared with common tertiary chiral amine synthetic methods, this procedure is much more concise and scalable, as exemplified by the facile synthesis of rivastigmine and N-methyl-1-phenylethanamine.

| S-EPMC6482873 | biostudies-literature

General technoeconomic analysis for electrochemical coproduction coupling carbon dioxide reduction with organic oxidation.

Project description:Electrochemical processes coupling carbon dioxide reduction reactions with organic oxidation reactions are promising techniques for producing clean chemicals and utilizing renewable energy. However, assessments of the economics of the coupling technology remain questionable due to diverse product combinations and significant process design variability. Here, we report a technoeconomic analysis of electrochemical carbon dioxide reduction reaction-organic oxidation reaction coproduction via conceptual process design and thereby propose potential economic combinations. We first develop a fully automated process synthesis framework to guide process simulations, which are then employed to predict the levelized costs of chemicals. We then identify the global sensitivity of current density, Faraday efficiency, and overpotential across 295 electrochemical coproduction processes to both understand and predict the levelized costs of chemicals at various technology levels. The analysis highlights the promise that coupling the carbon dioxide reduction reaction with the value-added organic oxidation reaction can secure significant economic feasibility.

| S-EPMC6858374 | biostudies-literature

Catalytic borylation of methane.

Project description:Despite steady progress in catalytic methods for the borylation of hydrocarbons, methane has not yet been subject to this transformation. Here we report the iridium-catalyzed borylation of methane using bis(pinacolborane) in cyclohexane solvent. Initially, trace amounts of borylated products were detected with phenanthroline-coordinated Ir complexes. A combination of experimental high-pressure and high-throughput screening, and computational mechanism discovery techniques helped to rationalize the foundation of the catalysis and identify improved phosphine-coordinated catalytic complexes. Optimized conditions of 150°C and 3500-kilopascal pressure led to yields as high as ~52%, turnover numbers of 100, and improved chemoselectivity for monoborylated versus diborylated methane.

| S-EPMC5609458 | biostudies-literature

Catalytic Mechanism of Liquid-Metal Indium for Direct Dehydrogenative Conversion of Methane to Higher Hydrocarbons.

Project description:There is a great interest in direct conversion of methane to valuable chemicals. Recently, we reported that silica-supported liquid-metal indium catalysts (In/SiO2) were effective for direct dehydrogenative conversion of methane to higher hydrocarbons. However, the catalytic mechanism of liquid-metal indium has not been clear. Here, we show the catalytic mechanism of the In/SiO2 catalyst in terms of both experiments and calculations in detail. Kinetic studies clearly show that liquid-metal indium activates a C-H bond of methane and converts methane to ethane. The apparent activation energy of the In/SiO2 catalyst is 170 kJ mol-1, which is much lower than that of SiO2, 365 kJ mol-1. Temperature-programmed reactions in CH4, C2H6, and C2H4 and reactivity of C2H6 for the In/SiO2 catalyst indicate that indium selectively activates methane among hydrocarbons. In addition, density functional theory calculations and first-principles molecular dynamics calculations were performed to evaluate activation free energy for methane activation, its reverse reaction, CH3-CH3 coupling via Langmuir-Hinshelwood (LH) and Eley-Rideal mechanisms, and other side reactions. A qualitative level of interpretation is as follows. CH3-In and H-In species form after the activation of methane. The CH3-In species wander on liquid-metal indium surfaces and couple each other with ethane via the LH mechanism. The solubility of H species into the bulk phase of In is important to enhance the coupling of CH3-In species to C2H6 by decreasing the formation of CH4 though the coupling of CH3-In species and H-In species. Results of isotope experiments by combinations of CD4, CH4, D2, and H2 corresponded to the LH mechanism.

| S-EPMC7643202 | biostudies-literature

Role of catalytic nitrile decomposition in tricopper complex mediated direct partial oxidation of methane to methanol.

Project description:Synthetic homogeneous system known to date performing methane to methanol conversion using O2 as terminal oxidant is unique and based on copper complex with piperazine-based ligand (Cu3L in Fig. 1) in a medium of acetonitrile. Prior work have shown that in order to achieve catalytic turnover, hydrogen peroxide is needed to regenerate the active site. We show in this paper that reaction solvent based on organic nitrile decompose concurrently with methane activation and that in the absence of either acetonitrile, Cu complex or hydrogen peroxide, the catalytic turnover does not happen. We show in this manuscript that the direct methane oxidation to methanol might have been mediated by catalytic Radziszewski oxidation between acetonitrile and H2O2. Additionally we have discovered that in the absence of methane, peroxide mediated acetonitrile decomposition also makes methanol via a background reaction which was hitherto unknown.

| S-EPMC8478979 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data