Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High Indirect Energy Consumption in AEM-Based CO₂ Electrolyzers Demonstrates the Potential of Bipolar Membranes.

ABSTRACT: Typically, anion exchange membranes (AEMs) are used in CO₂ electrolyzers, but those suffer from unwanted CO₂ crossover, implying (indirect) energy consumption for generating an excess of CO₂ feed and purification of the KOH anolyte. As an alternative, bipolar membranes (BPMs) have been suggested, which mitigate the reactant loss by dissociating water albeit requiring a higher cell voltage when operating at a near-neutral pH. Here, we assess the direct and indirect energy consumption required to produce CO in a membrane electrode assembly with BPMs or AEMs. More than 2/3 of the energy consumption for AEM-based cells concerns CO₂ crossover and electrolyte refining. While the BPM-based cell had a high stability and almost no CO₂ loss, the Faradaic efficiency to CO was low, making the energy requirement per mol of CO higher than for the AEM-based cell. Improving the cathode-BPM interface should be the future focus to make BPMs relevant to CO₂ electrolyzers.

SUBMITTER: Blommaert MA

PROVIDER: S-EPMC8762646 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Geometric Catalyst Utilization in Zero-Gap CO2 Electrolyzers.

Project description:The electrochemical reduction of CO2 (CO2RR) on silver catalysts has been demonstrated under elevated current density, longer reaction times, and intermittent operation. Maintaining performance requires that CO2 can access the entire geometric catalyst area, thus maximizing catalyst utilization. Here we probe the time-dependent factors impacting geometric catalyst utilization for CO2RR in a zero-gap membrane electrode assembly. We use three flow fields (serpentine, parallel, and interdigitated) as tools to disambiguate cell behavior. Cathode pressure drop is found to play the most critical role in maintaining catalyst utilization at all time scales by encouraging in-plane CO2 transport throughout the gas-diffusion layer (GDL) and around salt and water blockages. The serpentine flow channel with the highest pressure drop is then the most failure-resistant, achieving a CO partial current density of 205 mA/cm2 at 2.76 V. These findings are confirmed through selectivity measurements over time, double-layer capacitance measurements to estimate GDL flooding, and transport modeling of the spatial CO2 concentration.

| S-EPMC9841604 | biostudies-literature

Local Chemical Environment Governs Anode Processes in CO2 Electrolyzers.

Project description:A major goal within the CO2 electrolysis community is to replace the generally used Ir anode catalyst with a more abundant material, which is stable and active for water oxidation under process conditions. Ni is widely applied in alkaline water electrolysis, and it has been considered as a potential anode catalyst in CO2 electrolysis. Here we compare the operation of electrolyzer cells with Ir and Ni anodes and demonstrate that, while Ir is stable under process conditions, the degradation of Ni leads to a rapid cell failure. This is caused by two parallel mechanisms: (i) a pH decrease of the anolyte to a near neutral value and (ii) the local chemical environment developing at the anode (i.e., high carbonate concentration). The latter is detrimental for zero-gap electrolyzer cells only, but the first mechanism is universal, occurring in any kind of CO2 electrolyzer after prolonged operation with recirculated anolyte.

| S-EPMC8593866 | biostudies-literature

Intermittent Operation of CO2 Electrolyzers at Industrially Relevant Current Densities.

Project description:We demonstrate the dynamic operation of CO2 electrolyzer cells, with a power input mimicking the output of a solar photovoltaic power plant. The zero-gap design ensured efficient intermittent operation for a week, while avoiding significant performance loss.

| S-EPMC9112675 | biostudies-literature

High Pressure Electrochemical Reduction of CO2 to Formic Acid/Formate: A Comparison between Bipolar Membranes and Cation Exchange Membranes.

Project description:A high pressure semicontinuous batch electrolyzer is used to convert CO2 to formic acid/formate on a tin-based cathode using bipolar membranes (BPMs) and cation exchange membranes (CEMs). The effects of CO2 pressure up to 50 bar, electrolyte concentration, flow rate, cell potential, and the two types of membranes on the current density (CD) and Faraday efficiency (FE) for formic acid/formate are investigated. Increasing the CO2 pressure yields a high FE up to 90% at a cell potential of 3.5 V and a CD of ∼30 mA/cm2. The FE decreases significantly at higher cell potentials and current densities, and lower pressures. Up to 2 wt % formate was produced at a cell potential of 4 V, a CD of ∼100 mA/cm2, and a FE of 65%. The advantages and disadvantages of using BPMs and CEMs in electrochemical cells for CO2 conversion to formic acid/formate are discussed.

| S-EPMC6369647 | biostudies-literature

Bubble Formation in the Electrolyte Triggers Voltage Instability in CO2 Electrolyzers.

Project description:The electrochemical reduction of CO2 is promising for mitigating anthropogenic greenhouse gas emissions; however, voltage instabilities currently inhibit reaching high current densities that are prerequisite for commercialization. Here, for the first time, we elucidate that product gaseous bubble accumulation on the electrode/electrolyte interface is the direct cause of the voltage instability in CO2 electrolyzers. Although bubble formation in water electrolyzers has been extensively studied, we identified that voltage instability caused by bubble formation is unique to CO2 electrolyzers. The appearance of syngas bubbles within the electrolyte at the gas diffusion electrode (GDE)-electrolyte chamber interface (i.e. ∼10% bubble coverage of the GDE surface) was accompanied by voltage oscillations of 60 mV. The presence of syngas in the electrolyte chamber physically inhibited two-phase reaction interfaces, thereby resulting in unstable cell performance. The strategic incorporation of our insights on bubble growth behavior and voltage instability is vital for designing commercially relevant CO2 electrolyzers.

| S-EPMC7214942 | biostudies-literature

Catalyst-TiO(OH)2 could drastically reduce the energy consumption of CO2 capture.

Project description:Implementing Paris Climate Accord is inhibited by the high energy consumption of the state-of-the-art CO2 capture technologies due to the notoriously slow kinetics in CO2 desorption step of CO2 capture. To address the challenge, here we report that nanostructured TiO(OH)2 as a catalyst is capable of drastically increasing the rates of CO2 desorption from spent monoethanolamine (MEA) by over 4500%. This discovery makes CO2 capture successful at much lower temperatures, which not only dramatically reduces energy consumption but also amine losses and prevents emission of carcinogenic amine-decomposition byproducts. The catalytic effect of TiO(OH)2 is observed with Raman characterization. The stabilities of the catalyst and MEA are confirmed with 50 cyclic CO2 sorption and sorption. A possible mechanism is proposed for the TiO(OH)2-catalyzed CO2 capture. TiO(OH)2 could be a key to the future success of Paris Climat e Accord.

| S-EPMC6039475 | biostudies-literature

Tuning Ni-MoO2 Catalyst-Ionomer and Electrolyte Interaction for Water Electrolyzers with Anion Exchange Membranes.

Project description:Tailoring catalyst-ionomer and electrolyte interaction is crucial for the development of anion exchange membrane (AEM) water electrolysis. In this work, the interaction of Ni-MoO2 nanosheets with ionomers and electrolyte cations was investigated. The activity of Ni-MoO2 nanosheets for the hydrogen evolution reaction (HER) increased when tested in 1 M NaOH compared to 1 M KOH; however, it decreased when tested in 0.01 M KOH compared to 1 M KOH electrolyte. The capacitance minimum associated with the potential of zero free charge (pzfc) was shifted negatively from 0.5 to 0.4 V versus RHE when KOH concentration increased from 0.1 mM to 1 M KOH, suggesting a softening of the water in the double-layer to facilitate the OH- transport and faster kinetics of the Volmer step that lead to improved HER activity. The catalyst interaction with cationic moieties in the anion ionomer (or organic electrolytes) can also be rationalized based on the capacitance minimum, because the latter indicates a negatively charged catalyst during the HER, attracting the cationic moieties leading to the blocking of the catalytic sites and lower HER performance. The HER activity of Ni-MoO2 nanosheets is lower in benzyltrimethylammonium hydroxide (BTMAOH) than in tetramethylammonium hydroxide (TMAOH). Anion fumion ionomer and electrolytes with organic cations with benzyl group adsorption (such as BTMAOH) lead to decreased HER activity in comparison with TMAOH and Nafion. By utilizing Ni-MoO2 nanosheet electrodes as a cathode in a full non-platinum group metal (PGM) AEM electrolyzer, a current density of 1.15 A/cm2 at 2 V cell voltage in 1 M KOH at 50 °C was achieved. The electrolyzer showed exceptional stability in 0.1 M KOH for 65 h at 0.5 A/cm2.

| S-EPMC8159162 | biostudies-literature

Narrow Pressure Stability Window of Gas Diffusion Electrodes Limits the Scale-Up of CO2 Electrolyzers.

Project description:Electrochemical CO2 reduction is a promising process to store intermittent renewable energy in the form of chemical bonds and to meet the demand for hydrocarbon chemicals without relying on fossil fuels. Researchers in the field have used gas diffusion electrodes (GDEs) to supply CO2 to the catalyst layer from the gas phase. This approach allows us to bypass mass transfer limitations imposed by the limited solubility and diffusion of CO2 in the liquid phase at a laboratory scale. However, at a larger scale, pressure differences across the porous gas diffusion layer can occur. This can lead to flooding and electrolyte breakthrough, which can decrease performance. The aim of this study is to understand the effects of the GDE structure on flooding behavior and CO2 reduction performance. We approach the problem by preparing GDEs from commercial substrates with a range of structural parameters (carbon fiber structure, thickness, and cracks). We then determined the liquid breakthrough pressure and measured the Faradaic efficiency for CO at an industrially relevant current density. We found that there is a trade-off between flooding resistance and mass transfer capabilities that limits the maximum GDE height of a flow-by electrolyzer. This trade-off depends strongly on the thickness and the structure of the carbon fiber substrate. We propose a design strategy for a hierarchically structured GDE, which might offer a pathway to an industrial scale by avoiding the trade-off between flooding resistance and CO2 reduction performance.

| S-EPMC9006256 | biostudies-literature

Consumption substitution and change of household indirect energy consumption in China between 1997 and 2012.

Project description:With the rapid growth in the Chinese economy in recent decades, household incomes as well as consumption of goods and services have also steadily increased. This has resulted in growing demand for energy consumption across the economy. It has been suggested that consumption upgrades in tandem with substitutions might exert an impact on mitigating this growth. The input-output method was applied in this study to analyze variations in household indirect energy consumption between 1997 and 2012. The impact of consumption substitution on change was also determined using a two-tier structural decomposition analysis, in which the second-tier is a further decomposition based on first-tier results. The results show that the indirect energy use caused by household consumption makes up between 75% and 78% of total household energy demand and that this increased 161.2% over the study period. First-tier decomposition results reveal that this change was mostly caused by household consumption scale and energy intensity effects. Second-tier decomposition results reveal strong evidence for consumption substitution between energy-intensive industries and non-energy-intensive ones and that this can have an impact on reducing household indirect consumption. Household consumption therefore plays a prominent role in total energy consumption. Transforming to non-energy-intensive or services led consumption patterns should therefore be encouraged by the Chinese government in order to achieve conservation goals.

| S-EPMC7454985 | biostudies-literature

Low-Cost and Durable Bipolar Plates for Proton Exchange Membrane Electrolyzers.

Project description:Cost reduction and high efficiency are the mayor challenges for sustainable H2 production via proton exchange membrane (PEM) electrolysis. Titanium-based components such as bipolar plates (BPP) have the largest contribution to the capital cost. This work proposes the use of stainless steel BPPs coated with Nb and Ti by magnetron sputtering physical vapor deposition (PVD) and vacuum plasma spraying (VPS), respectively. The physical properties of the coatings are thoroughly characterized by scanning electron, atomic force microscopies (SEM, AFM); and X-ray diffraction, photoelectron spectroscopies (XRD, XPS). The Ti coating (50 μm) protects the stainless steel substrate against corrosion, while a 50-fold thinner layer of Nb decreases the contact resistance by almost one order of magnitude. The Nb/Ti-coated stainless steel bipolar BPPs endure the harsh environment of the anode for more than 1000 h of operation under nominal conditions, showing a potential use in PEM electrolyzers for large-scale H2 production from renewables.

| S-EPMC5353588 | biostudies-literature