Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Simultaneous analysis of quaternary ammonium cations and corresponding halide counterions by pyrolysis gas chromatography / mass spectrometry.

ABSTRACT: The use of quaternary ammonium compounds (QACs) as disinfectants has increased tremendously in the COVID-10 pandemic to inactivate Severe Acute Respiratory Syndrome Coronavirus type 2 (SARS-CoV2). Dialkyldimethylammonium halides represent a frequently used type among QACs. Different halide anions, each ionically linked to the same quaternary ammonium cation, show clear differences in biocidal activity, toxicity and allergic potential. Likewise, the alkyl chain length at the ammonium cation induces different biocidal efficacy and toxicology. Therefore, the object of this research was to develop a rapid and reliable method for the detection of ammonium cation and halide anion in a single analytical run. For that purpose, a gas chromatography mass spectrometry (GC/MS) method was developed for QACs of the dialkyldimethylammonium type. Pyrolytic conversion of the QACs in the injector port of the gas chromatograph into volatile molecule species allows fast and reliable subsequent GC/MS analysis. The developed method is suited for the determination of both the quaternary ammonium cation and the corresponding halide anion in a single gas chromatographic run. The application of this method to bulk material and standard material of explicitly specified didecyldimethylammonium chloride revealed deviations from the manufacturer's specifications in a range up to four-fifths. Furthermore, didecyldimethylammonium chloride was detected in a disinfectant that does not comply with the labeling requirement for biocidal ingredients. With the method presented, results can be obtained for disinfectants with minimum effort within seven minutes.

SUBMITTER: Thalhamer B

PROVIDER: S-EPMC8763416 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Organo-Montmorillonite Modified by Gemini Quaternary Ammonium Surfactants with Different Counterions for Adsorption toward Phenol.

Project description:The discharge of industrial phenol pollutants causes great harm to the natural environment and human health. In this study, phenol removal from water was studied via the adsorption of Na-montmorillonite (Na-Mt) modified by a series of Gemini quaternary ammonium surfactants with different counterions [(C11H23CONH(CH2)2N+ (CH3)2(CH2)2 N+(CH3)2 (CH2)2NHCOC11H23·2Y-, Y = CH3CO3-, C6H5COO- and Br-, 12-2-12·2Y-]. The results of the phenol adsorption indicated that MMt-12-2-12·2Br-, MMt-12-2-12·2CH3CO3- and MMt-12-2-12·2C6H5COO- reached the optimum adsorption capacity, which was 115.110 mg/g, 100.834 mg/g and 99.985 mg/g, respectively, under the conditions of the saturated intercalation concentration at 2.0 times that of the cation exchange capacity (CEC) of the original Na-Mt, 0.04 g of adsorbent and a pH = 10. The adsorption kinetics of all adsorption processes were in good agreement with the pseudo-second-order kinetics model, and the adsorption isotherm was better modeled by Freundlich isotherm. Thermodynamic parameters revealed that the adsorption of phenol was a physical, spontaneous and exothermic process. The results also showed that the counterions of the surfactant had a certain influence on the adsorption performance of MMt for phenol, especially the rigid structure, hydrophobicity, and hydration of the counterions.

| S-EPMC10004245 | biostudies-literature

The surface adsorption, aggregate structure and antibacterial activity of Gemini quaternary ammonium surfactants with carboxylic counterions.

Project description:A group of Gemini quaternary ammonium surfactants with the formula C n H2n+1CONH(CH2)2N+(CH3)2(CH2)2N+(CH3)2(CH2)2 NHCOC n H2n+1 · 2Y (n = 11, 13 and 15, Y = HCOO-, CH3COO- and CH3CHOHCOO-) have been synthesized by a counterion conversion process and characterized by Fourier transform infrared spectroscopy and mass spectroscopy. Their adsorption and self-aggregation properties are investigated by surface tension, conductivity, dynamic light scattering and transmission electron microscopy (TEM) measurements. The results show that these surfactants reduce the surface tension of water to a minimum value of 26.51 mN m-1 at a concentration of 5.72 × 10-2 mmol l-1. Furthermore, the increased alkyl chain length of the carboxylic counterions leads to the increased critical micelle concentration, the decreased degree of counterion binding (?) and the decreased self-assembly tendency, but the minimum area per surfactant molecule (A min) adsorbed at the air-aqueous solution are similar. TEM images reveal that these surfactants self-assemble spontaneously into aggregates with vesicle or bilayer structures. It is also found that they have superior antibacterial activity at a concentration of 0.1 g l-1. The high surface activity and high antibacterial activity of the Gemini quaternary ammonium salt surfactants containing different carboxylic counterions bring more possibilities for the application in the field of biomedicine.

| S-EPMC6731746 | biostudies-literature

Rational Design of Molecularly Imprinted Polymers Using Quaternary Ammonium Cations for Glyphosate Detection.

Project description:Molecularly imprinted polymers have emerged as cost-effective and rugged artificial selective sorbents for combination with different sensors. In this study, quaternary ammonium cations, as functional monomers, were systematically evaluated to design imprinted polymers for glyphosate as an important model compound for electrically charged and highly water-soluble chemical compounds. To this aim, a small pool of monomers were used including (3-acrylamidopropyl)trimethylammonium chloride, [2-(acryloyloxy)ethyl]trimethylammonium chloride, and diallyldimethylammonium chloride. The simultaneous interactions between three positively charged monomers and glyphosate were preliminary evaluated using statistical design of the experiment method. Afterwards, different polymers were synthesized at the gold surface of the quartz crystal microbalance sensor using optimized and not optimized glyphosate-monomers ratios. All synthesized polymers were characterized using atomic force microscopy, contact angle, Fourier-transform infrared, and X-ray photoelectron spectroscopy. Evaluated functional monomers showed promise as highly efficient functional monomers, when they are used together and at the optimized ratio, as predicted by the statistical method. Obtained results from the modified sensors were used to develop a simple model describing the binding characteristics at the surface of the different synthesized polymers. This model helps to develop new synthesis strategies for rational design of the highly selective imprinted polymers and to use as a sensing platform for water soluble and polar targets.

| S-EPMC7795498 | biostudies-literature

Hydrocarbon phenotyping of algal species using pyrolysis-gas chromatography mass spectrometry.

Project description:BackgroundBiofuels derived from algae biomass and algae lipids might reduce dependence on fossil fuels. Existing analytical techniques need to facilitate rapid characterization of algal species by phenotyping hydrocarbon-related constituents.ResultsIn this study, we compared the hydrocarbon rich algae Botryococcus braunii against the photoautotrophic model algae Chlamydomonas reinhardtii using pyrolysis-gas chromatography quadrupole mass spectrometry (pyGC-MS). Sequences of up to 48 dried samples can be analyzed using pyGC-MS in an automated manner without any sample preparation. Chromatograms of 30-min run times are sufficient to profile pyrolysis products from C8 to C40 carbon chain length. The freely available software tools AMDIS and SpectConnect enables straightforward data processing. In Botryococcus samples, we identified fatty acids, vitamins, sterols and fatty acid esters and several long chain hydrocarbons. The algae species C. reinhardtii, B. braunii race A and B. braunii race B were readily discriminated using their hydrocarbon phenotypes. Substructure annotation and spectral clustering yielded network graphs of similar components for visual overviews of abundant and minor constituents.ConclusionPyrolysis-GC-MS facilitates large scale screening of hydrocarbon phenotypes for comparisons of strain differences in algae or impact of altered growth and nutrient conditions.

| S-EPMC2883956 | biostudies-literature

Multi-Temperatures Pyrolysis Gas Chromatography: A Rapid Method to Differentiate Microorganisms

Project description:The identification of microorganisms using single-temperatures pyrolysis gas chromatography (ST-PyGC) has limitations, for example, the risk of missing characteristic peaks that are essential to the chemotaxonomic interpretation. In this paper, we proposed a new multi-temperature PyGC (MT-PyGC) method as an alternative to ST-PyGC, without sacrificing its speed and quality. Six bacteria (three Gram-positive and three Gram-negative), one micro-fungus and one archaeon, representing microorganisms from different domains, were analyzed by MT-PyGC. It is found that MT pyrograms cover a more complete range of characteristic peaks than ST. Coupling with thermogravimetric analysis, chemotaxonomic information extracted from pyrograms by MT-PyGC have the potential for the differentiation of microorganisms from environments including deep subterranean reservoirs and biomass conversion/biofuel production.

| S-EPMC9781292 | biostudies-literature

Migration of Quaternary Ammonium Cations from Exfoliated Clay/Low-Density Polyethylene Nanocomposites into Food Simulants.

Project description:Clay/polymer nanocomposites (CPNs) are polymers incorporating refined clay particles that are frequently functionalized with quaternary ammonium cations (QACs) as dispersion aids. There is interest in commercializing CPNs for food contact applications because they have improved strength and barrier properties, but there are few studies on the potential for QACs in CPNs to transfer to foods under conditions of intended use. In this study, we manufactured low-density poly(ethylene) (LDPE)-based CPNs and assessed whether QACs can migrate into several food simulants under accelerated storage conditions. QACs were found to migrate to a fatty food simulant (ethanol) at levels of ?1.1 ?g mg-1 CPN mass after 10 days at 40 °C, constituting about 4% total migration (proportion of the initial QAC content in the CPN that migrated to the simulant). QAC migration into ethanol was ?16× higher from LDPE containing approximately the same concentration of QACs but no clay, suggesting that most QACs in the CPN are tightly bound to clay particles and are immobile. Negligible QACs were found to migrate into aqueous, alcoholic, or acidic simulants from CPNs, and the amount of migrated QACs was also found to scale with the temperature and the initial clay concentration. The migration data were compared to a theoretical diffusion model, and it was found that the diffusion constant for QACs in the CPN was several orders of magnitude slower than predicted, which we attributed to the potential for QACs to migrate as dimers or other aggregates rather than as individual ions. Nevertheless, the use of the migration model resulted in a conservative estimate of the mass transfer of QAC from the CPN test specimens.

| S-EPMC6705235 | biostudies-literature

Can Alkyl Quaternary Ammonium Cations Substitute H2O2 in Controlling Cyanobacterial Blooms-Laboratory and Mesocosm Studies.

Project description:Mitigation of harmful cyanobacterial blooms that constitute a serious threat to water quality, particularly in eutrophic water, such as in aquaculture, is essential. Thus, in this study, we tested the efficacy of selected cyanocides towards bloom control in laboratory and outdoor mesocosm experiments. Specifically, we focused on the applicability of a group of cationic disinfectants, alkyltrimethyl ammonium (ATMA) compounds and H2O2. The biocidal effect of four ATMA cations with different alkyl chain lengths was evaluated ex situ using Microcystis colonies collected from a fish pond. The most effective compound, octadecyl trimethyl ammonium (ODTMA), was further evaluated for its selectivity towards 24 cyanobacteria and eukaryotic algae species, including Cyanobacteria, Chlorophyta, Bacillariophyta, Euglenozoa and Cryptophyta. The results indicated selective inhibition of cyanobacteria by ODTMA-Br (C18) on both Chroccocales and Nostocales, but a minor effect on Chlorophytes and Bacillariophytes. The efficacy of ODTMA-Br (C18) (6.4 μM) in mitigating the Microcystis population was compared with that of a single low dose of H2O2 treatments (117.6 μM). ODTMA-Br (C18) suppressed the regrowth of Microcystis for a longer duration than did H2O2. The results suggested that ODTMA-Br (C18) may be used as an effective cyanocide and that it is worth further evaluating this group of cationic compounds as a treatment to mitigate cyanobacterial blooms in aquaculture.

| S-EPMC8619391 | biostudies-literature

High-throughput microanalysis of large lignocellulosic sample sets by pyrolysis-gas chromatography/mass spectrometry.

Project description:High-throughput analytical techniques to assess the chemistry of lignocellulosic plant material are crucial to plant cell-wall research. We have established an analytical platform for this purpose and demonstrated its usefulness with two applications. The system is based on analytical pyrolysis, coupled to gas chromatography/mass spectrometry - a technique particularly suited for analysis of lignocellulose. Automated multivariate-based data-processing methods are used to obtain results within a few hours after analysis, with an experimental batch of 500 analyzed samples. The usefulness of multivariate sample discrimination methods and hierarchical clustering of samples is demonstrated. We have analyzed an Arabidopsis mutant collection consisting of 300 samples representing 31 genotypes. The mutant collection is presented through cluster analysis, based on chemotypic difference, with respect to wild type. Further, we have analyzed 500 thin sections from five biological replicate trees to create a spatial highly resolved profile of the proportions of syringyl-, guaiacyl- and p-hydroxyphenyl lignin across phloem, developing and mature wood in aspen. The combination of biologically easy to interpret information, the low demand of sample amount and the flexibility in sample types amenable to analysis makes this technique a valuable extension to the range of established high-throughput biomaterial analytical platforms.

| S-EPMC4738464 | biostudies-literature

Intratracheal instillation of quaternary ammonium compounds in rats

Project description:There is a lack of comprehensive toxicity studies of QACs associated with pulmonary toxicity. Therefore, we aimed to elucidate the potential pulmonary toxic effects of QACs based on toxicogenomic approach. We conducted transcriptome analysis using RNA sequencing to identify alterations in gene expression associated with QACs exposure.

2024-04-08 | GSE263314 | GEO

Identification and hazard prediction of tattoo pigments by means of pyrolysis-gas chromatography/mass spectrometry.

Project description:The implementation of regulation for tattoo ink ingredients across Europe has generated the need for analytical methods suitable to identify prohibited compounds. Common challenges of this subject are the poor solubility and the lack of volatility for most pigments and polymers applied in tattoo inks. Here, we present pyrolysis coupled to online gas chromatography and electron impact ionization mass spectrometry (py-GC/MS) as quick and reliable tool for pigment identification using both purified pigments and tattoo ink formulations. Some 36 organic pigments frequently used in tattoo inks were subjected to py-GC/MS with the aim to establish a pyrogram library. To cross-validate pigment identification, 28 commercially available tattoo inks as well as 18 self-made pigment mixtures were analyzed. Pyrograms of inks and mixtures were evaluated by two different means to work out the most reliable and fastest strategy for an otherwise rather time-consuming data review. Using this approach, the declaration of tattoo pigments currently used on the market could be verified. The pyrolysis library presented here is also assumed suitable to predict decomposition patterns of pigments when affected by other degradation scenarios, such as sunlight exposure or laser irradiation. Thus, the consumers' risk associated with the exposure to toxicologically relevant substances that originate from pigment decomposition in the dermal layers of the skin can be assessed. Differentiation between more or less harmful pigments for this field of application now will become feasible.

| S-EPMC4894928 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data