Dataset Information

LSB-based pre-embedding video steganography with rotating & shifting poly-pattern block matrix

ABSTRACT:

Background

In terms of data-hiding areas, video steganography is more advantageous compared to other steganography techniques since it uses video as its cover medium. For any video steganography, the good trade-off among robustness, imperceptibility, and payload must be created and maintained. Even though it has the advantage of capacity, video steganography has the robustness problem especially regarding spatial domain is used to implement it. Transformation operations and statistical attacks can harm secret data. Thus, the ideal video steganography technique must provide high imperceptibility, high payload, and resistance towards visual, statistical and transformation-based steganalysis attacks.

Methods

One of the most common spatial methods for hiding data within the cover medium is the Least Significant Bit (LSB) method. In this study, an LSB-based video steganography application that uses a poly-pattern key block matrix (KBM) as the key was proposed. The key is a 64 × 64 pixel block matrix that consists of 16 sub-pattern blocks with a pixel size of 16 × 16. To increase the security of the proposed approach, sub-patterns in the KBM are allowed to shift in four directions and rotate up to 270° depending on the user preference and logical operations. For additional security XOR and AND logical operations were used to determine whether to choose the next predetermined 64 × 64 pixel block or jump to another pixel block in the cover video frame to place a KBM to embed the secret data. The fact that the combination of variable KBM structure and logical operator for the secret data embedding distinguishes the proposed algorithm from previous video steganography studies conducted with LSB-based approaches.

Results

Mean Squared Error (MSE), Structural Similarity Index (SSIM) and Peak Signal-to-Noise Ratio (PSNR) parameters were calculated for the detection of the imperceptibility (or the resistance against visual attacks ) of the proposed algorithm. The proposed algorithm obtained the best MSE, SSIM and PSNR parameter values based on the secret message length as 0.00066, 0.99999, 80.01458 dB for 42.8 Kb of secret message and 0.00173, 0.99999, 75.72723 dB for 109 Kb of secret message, respectively. These results are better than the results of classic LSB and the studies conducted with LSB-based video steganography approaches in the literature. Since the proposed system allows an equal amount of data embedding in each video frame the data loss will be less in transformation operations. The lost data can be easily obtained from the entire text with natural language processing. The variable structure of the KBM, logical operators and extra security preventions makes the proposed system be more secure and complex. This increases the unpredictability and resistance against statistical attacks. Thus, the proposed method provides high imperceptibility and resistance towards visual, statistical and transformation-based attacks while acceptable even high payload.

SUBMITTER: Hacimurtazaoglu M

PROVIDER: S-EPMC8771781 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Matrix-assisted laser/desorption ionization (MALDI) has become a very popular ionization technique for mass spectrometry of synthetic polymers because it allows high throughput analysis of low amounts of sample while avoiding the complexity introduced by extensive multiple charging of electrospray ionization. Yet, fundamental mechanisms underlying this ionization process are not fully understood, so development of sample preparation methods remains empirical. Reliable prediction for the optimal matrix/analyte/salt system is indeed still not possible for homopolymers and it becomes even more challenging in the case of amphiphilic block copolymers where conditions dictated by one block are not compatible with MALDI requirements of the second block. In order to perform MALDI of copolymers composed of poly (ethylene oxide) (PEO) and polystyrene (PS) blocks, it was postulated here that experimental conditions suitable for both species would also be successful for PEO-b-PS. Accordingly, designs of experiments based on Quantitative Structure Activity Relationship (QSAR) analysis were first implemented, studying the influence of 19 matrices and 26 salts on the laser fluence requested for successful MALDI. This analysis first permitted to highlight correlations between the investigated 10 descriptors of matrices and salts and the analytical response, and then to construct models that permits reliable predictions of matrix/salt couples to be used for one or the other homopolymer. Selected couples were then used for MALDI of a PEO-b-PS copolymer but no general trend was observed: experimental conditions expected to work often failed whereas ionic adducts of the copolymer were clearly detected with some matrix/salt systems that were shown to badly perform for constituting homopolymers. Overall, this rules out the working assumption stating that the MALDI behavior of chains composed of PEO and PS segments should combine the behavior of the two polymeric species. Yet, although requiring a dedicated design of experiments, MALDI of the amphiphilic PEO-b-PS copolymer was achieved for the first time.

Project description:Rotating machinery condition monitoring and fault diagnosis are important bases for maintenance decisions, as the vibrations generated during operation are usually imperceptible to the naked eye. Eulerian video motion magnification (EVMM) can reveal subtle changes and has been widely used in various fields such as medicine, structural analysis, and fault diagnosis, etc. However, the method has a bound relationship among three parameters: spatial wavelength, amplification factor, and displacement function, so it is necessary to adjust the parameters manually in practical applications. In this paper, on the basis of the original method, an automatic solution of spatial cutoff wavelength based on brightness is proposed. First, an input video is decomposed into image sequences, their RGB color spaces are transformed into HSV color spaces, and the Value channel image representing brightness is selected to automatically calculate the spatial cutoff frequency, and then the spatial cutoff wavelength is determined, and the motion magnification video in the specified frequency band is obtained by substituting it into the original method. Then, a publicly available video is taken as an example for simulation analysis. By comparing the time-brightness curves of the three videos (original video, motion magnification video obtained by the original method and the improved method), it is apparent that the proposed method exhibits the most significant brightness variation. Finally, taking an overhung rotor-bearing test device as the object, five conditions are set, respectively: normal, rotor unbalance, loosened anchor bolt of the bearing seat, compound fault, rotor misalignment. The proposed method is adopted to magnify the motion of the characteristic frequency bands including 1X frequency and 2X frequency. The results show that no obvious displacement is found in normal working conditions, and that the rotor unbalance fault has an overall axial shaking, the bearing seat at the loose place has an obvious vertical displacement, while the compound fault combines the both fault characteristics, and the rotor misalignment fault has an obvious axial displacement of the free-end bearing seat. The method proposed in this paper can automatically obtain the space cutoff wavelength, which solves the problem of defects arising from manually adjusting the parameters in the original method, and provides a new method for rotating machinery fault diagnosis and other fields of application.