Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Removing Gas from a Closed-End Small Hole by Irradiating Acoustic Waves with Two Frequencies.

ABSTRACT: Filling microstructures in the air with liquid or removing trapped gases from a surface in a liquid are required in processes such as cleaning, bonding, and painting. However, it is difficult to deform the gas-liquid interface to fill a small hole with liquid when surface tension has closed one end. Therefore, it is necessary to have an efficient method of removing gas from closed-end holes in liquids. Here, we demonstrate the gas-removing method using acoustic waves from small holes. We observed gas column oscillation by changing the hole size, wettability, and liquid surface tension to clarify the mechanism. First, we found that combining two different frequencies enabled complete gas removal in water within 2 s. From high-speed observation, about half of the removal was dominated by droplet or film formation caused by oscillating the gas column. The other half was dominated by approaching and coalescing the divided gas column. We conclude that the natural frequency of both the air column and the bubbles inside the tube are important.

SUBMITTER: Matsumoto Y

PROVIDER: S-EPMC8779578 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A highly attenuating and frequency tailorable annular hole phononic crystal for surface acoustic waves.

Project description:Surface acoustic wave (SAW) devices are widely used for signal processing, sensing and increasingly for lab-on-a-chip applications. Phononic crystals can control the propagation of SAW, analogous to photonic crystals, enabling components such as waveguides and cavities. Here we present an approach for the realisation of robust, tailorable SAW phononic crystals, based on annular holes patterned in a SAW substrate. Using simulations and experiments, we show that this geometry supports local resonances which create highly attenuating phononic bandgaps at frequencies with negligible coupling of SAWs into other modes, even for relatively shallow features. The enormous bandgap attenuation is up to an order-of-magnitude larger than that achieved with a pillar phononic crystal of the same size, enabling effective phononic crystals to be made up of smaller numbers of elements. This work transforms the ability to exploit phononic crystals for developing novel SAW device concepts, mirroring contemporary progress in photonic crystals.The control and manipulation of propagating sound waves on a surface has applications in on-chip signal processing and sensing. Here, Ash et al. deviate from standard designs and fabricate frequency tailorable phononic crystals with an order-of-magnitude increase in attenuation.

| S-EPMC5539253 | biostudies-literature

Turing Patterns and Waves in Closed Two-Layer Gel Reactors.

Project description:Reaction-diffusion waves and stationary Turing patterns are observed in closed two-layer gel reactors, where the two compartments are initially filled with complementary sets of reactants of the chlorine dioxide-iodine-malonic acid-poly(vinyl alcohol) reaction. The asymmetrical loading generates concentration gradients and the patterns form at the interface between the two parts. These easy-to-perform experiments allow us to study a wide range of dynamical phenomena without requiring a specific reactor design or the use of sophisticated equipment. To get complementary information on pattern formation in parallel and perpendicular to the direction of the concentration gradients, two geometrically different configurations of compartments are presented. We demonstrate that three variants of the initial distribution of the chemicals can be equally applied, and this flexibility provides a way to introduce additional reagents to perturb the dynamics of the systems. A noticeable increase in the wavelength of Turing patterns and in the period of waves has been induced by adding bromide ions. The interaction of Turing and Hopf modes has been observed as a result of not only the variation of the initial poly(vinyl alcohol) concentration but that of the gradients as well.

| S-EPMC6648942 | biostudies-literature

Expression pattern of Pseudomonas aeruginosa biofilm-residing bacteria exposed to gentamicin or surface acoustic waves or gentamicin and surface acoustic waves combined

Project description:Bacteria are known to respond to various environmental stimuli including nutrient deprivation, osmotic stress, and exposure to antibiotics. Our experimental data showed that P. aeruginosa biofilm formed in urinary catheters is very suseptible to gentamicin treatment when combined with exposure to surface acoustic waves Our goal was to establish whether P. aeruginosa is capable of specifically sensing the surface acoustic waves as well as to try and decipher the molecular mechanism underlying the increased biofilm suseptibility to antibiotics treatment

2011-09-01 | GSE28081 | GEO

Swimming using surface acoustic waves.

Project description:Microactuation of free standing objects in fluids is currently dominated by the rotary propeller, giving rise to a range of potential applications in the military, aeronautic and biomedical fields. Previously, surface acoustic waves (SAWs) have been shown to be of increasing interest in the field of microfluidics, where the refraction of a SAW into a drop of fluid creates a convective flow, a phenomenon generally known as SAW streaming. We now show how SAWs, generated at microelectronic devices, can be used as an efficient method of propulsion actuated by localised fluid streaming. The direction of the force arising from such streaming is optimal when the devices are maintained at the Rayleigh angle. The technique provides propulsion without any moving parts, and, due to the inherent design of the SAW transducer, enables simple control of the direction of travel.

| S-EPMC3576398 | biostudies-literature

Vertical-type two-dimensional hole gas diamond metal oxide semiconductor field-effect transistors.

Project description:Power semiconductor devices require low on-resistivity and high breakdown voltages simultaneously. Vertical-type metal-oxide-semiconductor field-effect transistors (MOSFETs) meet these requirements, but have been incompleteness in diamond. Here we show vertical-type p-channel diamond MOSFETs with trench structures and drain current densities equivalent to those of n-channel wide bandgap devices for complementary inverters. We use two-dimensional hole gases induced by atomic layer deposited Al2O3 for the channel and drift layers, irrespective of their crystal orientations. The source and gate are on the planar surface, the drift layer is mainly on the sidewall and the drain is the p+ substrate. The maximum drain current density exceeds 200?mA?mm-1 at a 12?µm source-drain distance. On/off ratios of over eight orders of magnitude are demonstrated and the drain current reaches the lower measurement limit in the off-state at room temperature using a nitrogen-doped n-type blocking layer formed using ion implantation and epitaxial growth.

| S-EPMC6045668 | biostudies-literature

Nanoliter-droplet acoustic streaming via ultra high frequency surface acoustic waves.

Project description:The relevant length scales in sub-nanometer amplitude surface acoustic wave-driven acoustic streaming are demonstrated. We demonstrate the absence of any physical limitations preventing the downscaling of SAW-driven internal streaming to nanoliter microreactors and beyond by extending SAW microfluidics up to operating frequencies in the GHz range. This method is applied to nanoliter scale fluid mixing.

| S-EPMC4173126 | biostudies-literature

Circuit quantum acoustodynamics with surface acoustic waves.

Project description:The experimental investigation of quantum devices incorporating mechanical resonators has opened up new frontiers in the study of quantum mechanics at a macroscopic level. It has recently been shown that surface acoustic waves (SAWs) can be piezoelectrically coupled to superconducting qubits, and confined in high-quality Fabry-Perot cavities in the quantum regime. Here we present measurements of a device in which a superconducting qubit is coupled to a SAW cavity, realising a surface acoustic version of cavity quantum electrodynamics. We use measurements of the AC Stark shift between the two systems to determine the coupling strength, which is in agreement with a theoretical model. This quantum acoustodynamics architecture may be used to develop new quantum acoustic devices in which quantum information is stored in trapped on-chip acoustic wavepackets, and manipulated in ways that are impossible with purely electromagnetic signals, due to the 105 times slower mechanical waves.In this work, Manenti et al. present measurements of a device in which a tuneable transmon qubit is piezoelectrically coupled to a surface acoustic wave cavity, realising circuit quantum acoustodynamic architecture. This may be used to develop new quantum acoustic devices.

| S-EPMC5715021 | biostudies-literature

Extraordinary transmission of gigahertz surface acoustic waves.

Project description:Extraordinary transmission of waves, i.e. a transmission superior to the amount predicted by geometrical considerations of the aperture alone, has to date only been studied in the bulk. Here we present a new class of extraordinary transmission for waves confined in two dimensions to a flat surface. By means of acoustic numerical simulations in the gigahertz range, corresponding to acoustic wavelengths ??~?3-50??m, we track the transmission of plane surface acoustic wave fronts between two silicon blocks joined by a deeply subwavelength bridge of variable length with or without an attached cavity. Several resonant modes of the structure, both one- and two-dimensional in nature, lead to extraordinary acoustic transmission, in this case with transmission efficiencies, i.e. intensity enhancements, up to ~23 and ~8 in the two respective cases. We show how the cavity shape and bridge size influence the extraordinary transmission efficiency. Applications include new metamaterials and subwavelength imaging.

| S-EPMC5027576 | biostudies-literature

Surface Acoustic Waves to Drive Plant Transpiration.

Project description:Emerging fields of research in electronic plants (e-plants) and agro-nanotechnology seek to create more advanced control of plants and their products. Electronic/nanotechnology plant systems strive to seamlessly monitor, harvest, or deliver chemical signals to sense or regulate plant physiology in a controlled manner. Since the plant vascular system (xylem/phloem) is the primary pathway used to transport water, nutrients, and chemical signals-as well as the primary vehicle for current e-plant and phtyo-nanotechnology work-we seek to directly control fluid transport in plants using external energy. Surface acoustic waves generated from piezoelectric substrates were directly coupled into rose leaves, thereby causing water to rapidly evaporate in a highly localized manner only at the site in contact with the actuator. From fluorescent imaging, we find that the technique reliably delivers up to 6x more water/solute to the site actuated by acoustic energy as compared to normal plant transpiration rates and 2x more than heat-assisted evaporation. The technique of increasing natural plant transpiration through acoustic energy could be used to deliver biomolecules, agrochemicals, or future electronic materials at high spatiotemporal resolution to targeted areas in the plant; providing better interaction with plant physiology or to realize more sophisticated cyborg systems.

| S-EPMC5374464 | biostudies-literature

Durability-enhanced two-dimensional hole gas of C-H diamond surface for complementary power inverter applications.

Project description:Complementary power field effect transistors (FETs) based on wide bandgap materials not only provide high-voltage switching capability with the reduction of on-resistance and switching losses, but also enable a smart inverter system by the dramatic simplification of external circuits. However, p-channel power FETs with equivalent performance to those of n-channel FETs are not obtained in any wide bandgap material other than diamond. Here we show that a breakdown voltage of more than 1600 V has been obtained in a diamond metal-oxide-semiconductor (MOS) FET with a p-channel based on a two-dimensional hole gas (2DHG). Atomic layer deposited (ALD) Al2O3 induces the 2DHG ubiquitously on a hydrogen-terminated (C-H) diamond surface and also acts as both gate insulator and passivation layer. The high voltage performance is equivalent to that of state-of-the-art SiC planar n-channel FETs and AlGaN/GaN FETs. The drain current density in the on-state is also comparable to that of these two FETs with similar device size and VB.

| S-EPMC5316979 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data