Simulations of goaf surface subsidence via filling control.
Ontology highlight
ABSTRACT:
SUBMITTER: Yang Y
PROVIDER: S-EPMC8782490 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Three recent studies used similar stimulus sequences to investigate mechanisms for brightness perception. Anstis and Greenlee (2014) demonstrated that adaptation to a flickering black and white outline erased the visibility of a subsequent target shape defined by a luminance increment or decrement. Robinson and de Sa (2012, 2013) used a flickering disk or annulus to show a similar effect. Here, a neural network model of visual perception (Francis & Kim, 2012), that previously explained properties of scene fading, is shown to also explain most of the erasure effects reported by Anstis and Greenlee and by Robinson and de Sa. The model proposes that in normal viewing conditions a brightness filling-in process is constrained by oriented boundaries, which thereby define separate regions of a visual scene. Contour adaptation can weaken the boundaries and thereby allow brightness signals to merge together, which renders target stimuli indistinguishable from the background. New simulations with the stimuli used by Anstis and Greenlee and Robinson and de Sa produce model output very similar to the perceptual experience of human observers. Finally, the model predicts that adaptation to illusory contours will not produce contour erasure.
| S-EPMC4950019 | biostudies-literature
Project description:UNLABELLED:Control over nucleation and growth of multi-walled carbon nanotubes in the nanochannels of porous alumina membranes by several combinations of posttreatments, namely exposing the membrane top surface to atmospheric plasma jet and application of standard S1813 photoresist as an additional carbon precursor, is demonstrated. The nanotubes grown after plasma treatment nucleated inside the channels and did not form fibrous mats on the surface. Thus, the nanotube growth mode can be controlled by surface treatment and application of additional precursor, and complex nanotube-based structures can be produced for various applications. A plausible mechanism of nanotube nucleation and growth in the channels is proposed, based on the estimated depth of ion flux penetration into the channels. PACS:63.22.Np Layered systems; 68. Surfaces and interfaces; Thin films and nanosystems (structure and non-electronic properties); 81.07.-b Nanoscale materials and structures: fabrication and characterization.
| S-EPMC4147107 | biostudies-literature
Project description:The complexity of micropatterned cell constructs has been limited by difficulties in patterning more than two surface components on a culture substrate. Photolithography using multiple aligned masks is well established for generalized multicomponent patterning, but is often too harsh for biomolecules. We report a two-mask photolithographic process that is tuned to preserve bioactivity in patterns composed of covalently coupled poly(ethylene glycol) (PEG), adsorbed extracellular matrix protein (e.g., collagen I), and adsorbed serum proteins (e.g., vitronectin). Thereby, we pattern two cell types-primary hepatocytes and 3T3 fibroblasts-demonstrating control over contact and spacing (20-200 microm) between the two cell types for over one week. This method is applicable to the study of intercellular communication in cell biology and tissue engineering.
| S-EPMC3145459 | biostudies-literature
Project description:In China's northwest coal mining area, the excavation of shallow buried thick coal seams has caused serious damage to the phreatic water layer and induced deterioration of the ecological environment. Backfilling is a basic method of controlling the loss of groundwater and reducing surface subsidence. In order to reduce the porosity of the backfill material and control the compression ratio of the backfill body, the grain gradation of the local aeolian sand was studied based on the geological conditions of the shallow buried coal seam in the Yulin mining area, Shaanxi province. Subsequently, aeolian sand was selected as the backfilling aggregate, and tests were implemented. The optimum proportion and slurry concentration of the backfill material were then obtained. The engineering application shows that the strength and stability of the backfill body based on the close packing theory can satisfy the requirements of supporting the overlying strata, and the integrity of overburden strata is competent. The maximum accumulated surface subsidence was measured to be 38mm, indicating that the aeolian sand-based backfill material in shallow and thick underground coal seam mining is able to protect the eco-environment and control the geo-environmental hazards, which are critical for the sustainable development of the mining industry and economic growth.
| S-EPMC6056034 | biostudies-literature
Project description:The filtration effect significantly affects the gangue slurry velocity and concentration, making it difficult to evaluate the gangue slurry diffusion range. Based on the Darcy seepage law, a seepage theoretical calculation model is established considering the filtration time and space effect. And the "water-cement ratio change matrix" in the seepage process of coal gangue slurry is deduced, revealing the basic mechanism of the porous media filtration effect, and the water-cement ratio gradually increases in the seepage process of gangue slurry. The visual test platform for slurry diffusion in goaf was independently developed for testing. The active heating optical fiber method (AHFO) was used to monitor the flow and diffusion of coal gangue slurry in the collapse zone of goaf, and the gravity gradient and water cement ratio of slurry in goaf were measured. The law of particle sedimentation in the gangue slurry flow process under the filtration effect was revealed, and engineering verification was carried out. The results show that the average slope of the gangue slurry in the gangue accumulation is 6.34%, and the overall flow law of the gangue slurry in the goaf is the first longitudinal expansion and then transverse diffusion. The water-cement ratio near the grouting mouth is smaller than the initial water-cement ratio, the near-end water-cement ratio is smaller, and the far-end water-cement ratio is larger. During on-site filling, the accumulated grouting volume of a single hole is 700 m3, and the gangue slurry diffusion distance is greater than 45m, indicating that the gangue slurry has good fluidity.
| S-EPMC9955605 | biostudies-literature
Project description:GENOMICON-Seq tool for simulation of realistic amplicon sequencing of viruses and whole exome sequencing of human
| PRJEB81738 | ENA
Project description:Breweries produce an increasing selection of beer and nonbeer beverages. Yeast and filamentous fungi may compromise quality and safety of these products in several ways. Recent studies on fungal communities in breweries are scarce and mostly conducted with culture-dependent methods. We explored fungal diversity in the production of alcoholic and nonalcoholic beverages in four breweries. Samples were taken for next generation sequencing (NGS) at the key contamination sites in 10 filling lines. Moreover, fungal isolates were identified in 68 quality control samples taken from raw materials, filling line surfaces, air, and products. NGS gave a comprehensive view of fungal diversity on filling line surfaces. The surface-attached communities mainly contained ascomycetous fungi. Depending on the site, the dominant genera included Candida, Saccharomyces, Torulaspora, Zygosaccharomyces, Alternaria, Didymella, and Exophiala. Sanger sequencing revealed 28 and 27 species of yeast and filamentous fungi, respectively, among 91 isolates. The most common species Saccharomyces cerevisiae, Zygosaccharomyces rouxii, and Wickerhamomuces anomalus were detected throughout production. Filling line surface and air samples showed the greatest diversity of yeast and filamentous fungi, respectively. The isolates of the most common yeast genera Candida, Pichia, Saccharomyces, and Wickerhamomyces showed low spoilage abilities in carbonated, chemically preserved drinks but could grow in products with reduced hurdles. Preservative resistant yeasts were rare, belonging to the species Dekkera bruxellensis, Pichia manschurica, and Zygosaccharomyces bailii. Penicillium spp. were dominant filamentous fungi. The results of this study help to evaluate spoilage risks caused by fungal contaminants detected in breweries.
| S-EPMC9303908 | biostudies-literature
Project description:Carbon nanodots (C-dots) are a kind of fluorescent carbon nanomaterials, composed of polyaromatic carbon domains surrounded by amorphous carbon frames, and have attracted a great deal of attention because of their interesting properties. There are still, however, challenges ahead such as blue-biased photoluminescence, spectral broadness, undefined energy gaps and etc. In this report, we chemically modify the surface of C-dots with a series of para-substituted anilines to control their photoluminescence. Our surface functionalization endows our C-dots with new energy levels, exhibiting long-wavelength (up to 650 nm) photoluminescence of very narrow spectral widths. The roles of para-substituted anilines and their substituents in developing such energy levels are thoroughly studied by using transient absorption spectroscopy. We finally demonstrate light-emitting devices exploiting our C-dots as a phosphor, converting UV light to a variety of colors with internal quantum yields of ca. 20%.
| S-EPMC4517466 | biostudies-literature
Project description:Precise control of alloying sites has long been a challenging pursuit, yet little has been achieved for the atomic-level manipulation of metallic nanomaterials. Here we describe utilization of a surface motif exchange (SME) reaction to selectively replace the surface motifs of parent [Ag44(SR)30]4- (SR = thiolate) nanoparticles (NPs), leading to bimetallic NPs with well-defined molecular formula and atomically-controlled alloying sites in protecting shell. A systematic mass (and tandem mass) spectrometry analysis suggests that the SME reaction is an atomically precise displacement of SR-Ag(I)-SR-protecting modules of Ag NPs by the incoming SR-Au(I)-SR modules, giving rise to a core-shell [Ag32@Au12(SR)30]4-. Theoretical calculation suggests that the thermodynamically less favorable core-shell Ag@Au nanostructure is kinetically stabilized by the intermediate Ag20 shell, preventing inward diffusion of the surface Au atoms. The delicate SME reaction opens a door to precisely control the alloying sites in the protecting shell of bimetallic NPs with broad utility.
| S-EPMC5691201 | biostudies-literature
Project description:We detected land displacements of Venice by Persistent Scatterer Interferometry using ERS and ENVISAT C-band and TerraSAR-X and COSMO-SkyMed X-band acquisitions over the periods 1992-2010 and 2008-2011, respectively. By reason of the larger observation period, the C-band sensors was used to quantify the long-term movements, i.e. the subsidence component primarily ascribed to natural processes. The high resolution X-band satellites reveal a high effectiveness to monitor short-time movements as those induced by human activities. Interpolation of the two datasets and removal of the C-band from the X-band map allows discriminating between the natural and anthropogenic components of the subsidence. A certain variability characterizes the natural subsidence (0.9 ± 0.7 mm/yr), mainly because of the heterogeneous nature and age of the lagoon subsoil. The 2008 displacements show that man interventions are responsible for movements ranging from -10 to 2 mm/yr. These displacements are generally local and distributed along the margins of the city islands.
| S-EPMC3783893 | biostudies-other