Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Assessing Pelvic Tilt in Patients Undergoing Total Hip Arthroplasty Using Sensor Technology.

ABSTRACT:

Background

The purpose of our study was to assess the accuracy of a commercially available wearable sensor in replicating pelvic tilt movement in both the sitting and standing position in patients before total hip arthroplasty.

Methods

This prospective study evaluated patients undergoing a primary unilateral total hip arthroplasty by a single surgeon. Patients were excluded if they had a body mass index (BMI) greater than 40 kg/m². Two sensors were adhered directly to patients' skin at S2 and T12. The S2 angle was recorded on the sensor at maximum flexion and extension angles and compared with pelvic tilt measurements on both sitting and standing radiographs. The primary outcomes recorded were patients' pelvic tilts measured using radiographs (PT-RAD) and sensors (PT-SEN), with Pearson correlation coefficients and intraclass correlation coefficients (ICCs) calculated.

Results

Sixty-one patients (35 males and 26 females) with an average age of 61.5 ± 8.5 years and BMI of 26.9 ± 4.1 kg/m² were analyzed. The mean prestanding PT-RAD and PT-SEN were 1.5 ± 8.3 and 1.0 ± 8.1, respectively, with an ICC of 0.98 (95% confidence interval, 0.96-0.99). The mean presitting PT-RAD and PT-SEN were -21.9 ± 12.5 and -20.9 ± 11.7, respectively, with an ICC of 0.97 (95% confidence interval, 0.95-0.98). The multiple R² was 0.95 for the prestanding and presitting comparisons. The R² for all comparisons between PT-RAD and PT-SEN was >0.85, regardless of BMI or sex.

Conclusions

Although the use of wearable technology may have limitations, based on our results, a wearable sensor is accurate in replicating pelvic tilt movement.

SUBMITTER: Sharma AK

PROVIDER: S-EPMC8784288 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pelvic tilt in patients undergoing total hip arthroplasty: when does it matter?

Project description:Pelvic tilt (PT) affects the functional anteversion and inclination of acetabular components in total hip arthroplasty (THA). One-hundred and thirty-eight consecutive patients who underwent unilateral primary THA were reviewed. Most cases had some degree of pre-operative PT, with 17% having greater than 10° of PT on standing pre-operative radiographs. There was no significant change in PT following THA. A computer model of a hemispheric acetabular component implanted in a range of anatomic positions in a pelvis with varying PT was created to determine the effects of PT on functional anteversion and inclination. Based on the study results, tilt-adjustment of the acetabular component position based on standing pre-operative imaging will likely improve functional component position in most patients undergoing THA.

| S-EPMC4359644 | biostudies-literature

Influence of Contralateral Hip Status on Pelvic Tilt After Total Hip Arthroplasty.

Project description:BackgroundEvery degree of change in pelvic tilt (PT) leads to a 0.7° change in anteversion and a 0.3° change in inclination. This study aimed to determine the significance of contralateral hip arthritis on changes in PT using preoperative and postoperative anteroposterior radiographs.MethodsThere were 193 primary total hip arthroplasties done by 2 surgeons at a single academic tertiary referral center reviewed between September 2021 and January 2023. PT was calculated as Tilt = -(ln[(B/A) × (1/0.483)]) / 0.051. Value A is the distance from the base of the SI joint to the superior margin of the obturator foramen; value B is the height of the obturator foramen. After exclusions, contralateral hips were identified as being normal (n = 75), arthritic (n = 39) (Tönnis grade 3/4), replaced (n = 34), or having undergone simultaneous bilateral total hip arthroplasty (n = 5) on postoperative films. Difference in PT was measured between preoperative and postoperative films taken 1-3 months after surgery. Analyses for statistical significance were calculated using t-tests and one-way analysis of variance.ResultsAverage change in PT in patients with normal contralateral hips was -5.2° with an absolute mean difference of 7.6°, -1.5° for arthritic contralateral hips with an absolute mean difference of 5.0°, -1.6° for replaced contralateral hips with a mean absolute difference of 4.3°, and 2.2° for bilateral hips with a mean absolute difference of 2.6° (P < .01).ConclusionsDifferences in postoperative PT changes between healthy, arthritic, and replaced contralateral hip study groups were significant. Changes in preoperative to postoperative tilt may have implications for optimal cup placement.

| S-EPMC11347829 | biostudies-literature

Variations in lower limb alignments indicate pelvic tilt after total hip arthroplasty.

Project description:ObjectiveWe sought to correlate various spinopelvic and lower limb alignments, and to examine the current spinopelvic theories on a Chinese cohort.MethodsWe retrospectively reviewed 166 patients undergoing THA. Among them, 138 patients with unilateral THA met the inclusion criteria. Sagittal alignments and cup orientations were measured on standing and sitting lateral EOS images. Patients were categorized into two groups with a scoring system for lumbar spine degeneration. Patients' demographics including age, sex, lumbar spine degeneration and radiographic measurements were studied.ResultsPT, SS, LL and TK differed significantly between standing and sitting within each group except for TK in degenerative group (32.8 ± 13.9 vs. 32.9 ± 14.2, p = 0.905). Compared with degenerative spine group, non-degenerative spine patients have great pelvic mobility (ΔPT, -24.4 ± 12.5° vs. -17.6 ± 10.7, p = 0.0008), greater lumbar mobility (ΔLL, -34.8 ± 15.2 vs. -21.7 ± 12.2, p = < 0.0001) and compensatory cup orientation changes (ΔRA, -15.5 ± 11.1 vs. -12.0 ± 8.4, p = 0.00920; ΔRI, -10.8 ± 11.5 vs. -5.6 ± 7.5, p = 0.0055). Standing PT and ankle dorsiflexion angle correlated positively (R2 = 0.236, p = 0.005).ConclusionTHA patients in this cohort showed a spinopelvic motion paradigm similar to that from previous studies on Caucasians. Ankle dorsiflexion indicate greater posterior pelvic tilt on standing. Surgeons should beware of risks of instability in patients with lower limb compensations.Advances in knowledgeThis study provides new insights into the clinical relevance of lower limb alignments to spinopelvic motion after THA in a relatively young Chinese population.

| S-EPMC9773480 | biostudies-literature

Is the Rate of Change in Posterior Pelvic Tilt After Total Hip Arthroplasty Constant?

Project description:BackgroundThe purpose of this study was to evaluate the age-related change in pelvic sagittal inclination in the standing position after total hip arthroplasty (THA). This study hypothesized that the rate of progression of posterior tilt is not constant.Material and methodsWe measured sacral slope and pelvic tilt in 36 patients who were followed up for more than 10 years after unilateral primary THA.ResultsThe posterior pelvic tilt in the standing position progressed significantly in the first year after THA and then progressed slowly. However, there was a tendency to accelerate again for those older than 75 years. Posterior pelvic tilt tended to progress rapidly after surgery in patients with femoral neck fractures and subchondral fractures of the femoral head.ConclusionsIn patients older than 75 years and those with fragility fractures, postoperative pelvic tilt in the standing position tends to be greater, suggesting that the use of a large head or dual mobility system should be considered.

| S-EPMC9108515 | biostudies-literature

How much does lumbar fusion change sagittal pelvic tilt in individuals receiving total hip arthroplasty?

Project description:BackgroundThis study primarily aims to examine the effect of lumbar fusion on changes in sagittal pelvic tilt (SPT) in total hip arthroplasty (THA) patients.MethodsWe reviewed 19 hip osteoarthritic patients undergoing THA with or without lumbar fusion. The gender, age, primary disease, Deyo comorbidity score, and year of surgery were sorted and matched. All patients were followed up for at least 12 months. They were compared in terms of the SPT angle, Harris hip score (HHS) and complications.ResultsOn average, the patients receiving lumbar fusion had a - 3.9 (95% CI - 7.7 to - 1.5) degrees of SPT before THA and - 2.7 (95% CI - 6.5 to 1.1) degrees postoperatively, and the THA patients without lumbar fusion averaged 2.5 (95% CI - 0.1 to 5.0) degrees and 4.2 (95% CI 2.0 to 6.4) degrees, respectively. In the lumbar fusion patients, the mean SPT was - 3.9 (95% CI - 9.9 to 2.0) degrees with L5S1 fusion and - 4.0(95% CI - 10.0 to 2.1) degrees without L5S1 fusion on the standing radiograph before THA (t = 0.01, P = 0.99). The mean SPT was - 1.2 (95% CI - 4.9 to 2.6) degrees with one- and two-segment fusion and - 10.0 (95% CI - 18.5 to 1.5) degrees with three- and four-segment fusion before THA (t = 2.60, P = 0.02). There was no statistically significant difference in cup inclination and cup anteversion after THA between the lumbar fusion and control groups. These patients in the two groups achieved a similar HHS 12 months after THA despite the fact that they had different SPT and HHS before THA.ConclusionLumbar fusion appears to increase the posterior SPT by approximately 6 degrees in the patients undergoing THA. Lumbar fusion of more than two segments is a predictor of more posterior SPT changes, but fusion of L5S1 is not.

| S-EPMC8796607 | biostudies-literature

Proposal of accurate cup placement procedure during total hip arthroplasty based on pelvic tilt discrepancies in the lateral position.

Project description:By combining the anatomical-pelvic-plane (APP) positioner with a newly improved navigation system during total hip arthroplasty (THA), it is theoretically possible to determine cup orientation based on the APP while tracking pelvic movement. The purpose of this study was to determine the navigation accuracy and whether the error is related to the pelvic position fixed by the positioner. Fifty hips that underwent primary THA between 2018 and 2020 were analysed. The accuracy was 2.34° at radiographic inclination (RI) and - 5.01° at radiographic anteversion (RA), and the error was within 10° at both RI and RA in only 40 of 50 hips (80.0%). The discrepancy in pelvic sagittal tilt was correlated with the cup orientation error and especially strongly correlated with the RA error (r = - 0.751, p < 0.001). When RI and RA were calculated using a correction formula to determine the true cup orientation based on the pelvic tilt discrepancies, the error in both RI and RA was within 10° in all cases (100%). The navigation accuracy is related to the pelvic position fixed by the positioner, and the correction formula for the target angle that considers pelvic tilt discrepancies can lead to accurate cup placement in the future.

| S-EPMC8260668 | biostudies-literature

A Sensor-Based Screening Tool for Identifying High Pelvic Mobility in Patients Due to Undergo Total Hip Arthroplasty.

Project description:There is increasing evidence that pelvic mobility is a critical factor to consider in implant alignment during total hip arthroplasty (THA). Here, we test the feasibility of using an inertial sensor fitted across the sacrum to measure change in pelvic tilt, and hence screen for patients with high pelvic mobility. Patients (n = 32, mean age: 57.4 years) due to receive THA surgery participated in the study. Measures of pelvic tilt were captured simultaneously using the device and radiograph in three functional positions: Standing, flexed-seated, and step-up. We found a strong correlation between the device and radiograph measures for the change in pelvic tilt measure from standing to flexed-seated position (R2 = 0.911); 75% of absolute errors were under 5 degrees. We demonstrated that the device can be used as a screening tool to rapidly identify patients who would benefit from more detailed surgical planning of implant positioning to reduce future risks of impingement and dislocation.

| S-EPMC7663251 | biostudies-literature

Intraperitoneal Loss of Pelvic Array Pin During Navigated Total Hip Arthroplasty.

Project description:Pelvic array pin placement during navigated total hip arthroplasty has been known to cause complications; however, most of them are minor. We report a 78-year-old female who underwent a routine computer-navigated total hip replacement which was subsequently complicated by complete loss of the pelvic array pin requiring retrieval via laparotomy. No structures were injured despite the surrounding urological, vascular, and visceral anatomy. The patient recovered and subsequently underwent a total hip arthroplasty without complication 6 weeks later. This case illustrates the dangers of inserting a pelvic array pin within patients with poor bone quality and highlights necessary considerations of pin design and surgical techniques to minimize this complication.

| S-EPMC9764167 | biostudies-literature

Intraoperative Pelvic Tilt and Axial Rotation During Total Hip Arthroplasty Through the Direct Anterior Approach is Affected by the Acetabular Retractor and Cup Impactor.

Project description:BackgroundIntraoperative pelvic motion during total hip arthroplasty (THA) in the supine position affects acetabular cup placement and occurs at each step of THA; however, there are no reports of pelvic motion changes during each stage of THA via the direct anterior approach (DAA). This study aimed to evaluate pelvic motion at each step of THA through the DAA.MethodsFrom March to October 2022, 71 hips were prospectively measured for intraoperative pelvic tilt and axial rotation during THA through the DAA at a single center. These parameters were measured during each surgical step using the augmented reality-hip navigation system.ResultsBoth pelvic tilt and axial rotation were maximal during acetabular cup placement. The mean intraoperative pelvic tilt and axial rotation during cup placement were 4.8 ± 2.6° (95% confidence interval, 4.19-5.41°) and 4.2 ± 3.3° (95% confidence interval, 3.42-4.98°), respectively. The effects of the acetabular retractor and cup impactor on pelvic tilt and axial rotation were comparable. Spearman's correlation tests showed significant correlation between axial rotation and body mass index (r = -0.444, P = .00011).ConclusionsThe pelvis tilts forward and rotates toward the surgical side during THA through the DAA. The effects of the acetabular retractor and cup impactor on pelvic motion are comparable. Cup implantation must take into account pelvic movement, and it must be recognized that the pelvis is moving at that time, even with only the acetabular retractor inserted, compared to before the skin incision.

| S-EPMC10665692 | biostudies-literature

A Novel Machine Learning Predictive Tool Assessing Outpatient or Inpatient Designation for Medicare Patients Undergoing Total Hip Arthroplasty.

Project description:BackgroundThe Centers for Medicare and Medicaid Services removed total hip arthroplasty (THA) from the inpatient-only list. This has created significant confusion regarding which patients qualify for an inpatient designation. The purpose of this study is to develop and validate a novel predictive tool for preoperatively objectively determining "outpatient" vs "inpatient" status for THA in the Medicare population.MethodsA cohort of Medicare patients undergoing primary THA between January 2017 and September 2019 was retrospectively reviewed. A machine learning model was trained using 80% of the THA patients, and the remaining 20% was used for testing the model performance in terms of accuracy and the average area under the receiver operating characteristic curve. Feature importance was obtained for each feature used in the model.ResultsOne thousand ninety-one patients had outpatient stays, and 318 qualified for inpatient designation. Significant associations were demonstrated between inpatient designations and the following: higher BMI, increased patient age, better preoperative functional scores, higher American Society of Anesthesiologist Physical Status Classification, higher Modified Frailty Index, higher Charlson Comorbidity Index, female gender, and numerous comorbidities. The XGBoost model for predicting an inpatient or outpatient stay was 78.7% accurate with the area under the receiver operating characteristic curve to be 81.5%.ConclusionsUsing readily available key baseline characteristics, functional scores and comorbidities, this machine-learning model accurately predicts an "outpatient" or "inpatient" stay after THA in the Medicare population. BMI, age, functional scores, and American Society of Anesthesiologist Physical Status Classification had the highest influence on this predictive model.

| S-EPMC8076615 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data