Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Outstanding Strengthening and Toughening Behavior of 3D-Printed Fiber-Reinforced Composites Designed by Biomimetic Interfacial Heterogeneity.

ABSTRACT: 3D printing of fiber-reinforced composites is expected to be the forefront technology for the next-generation high-strength, high-toughness, and lightweight structural materials. The intrinsic architecture of 3D-printed composites closely represents biomimetic micro/macrofibril-like hierarchical structure composed of intermediate filament assembly among the micron-sized reinforcing fibers, and thus contributes to a novel mechanism to simultaneously improve mechanical properties and structural features. Notably, it is found that an interfacial heterogeneity between numerous inner interfaces in the hierarchical structure enables an exceptional increase in the toughness of composites. The strong interfacial adhesion between the fibers and matrix, with accompanying the inherently weak interfacial adhesion between intermediate filaments and the resultant interfacial voids, provide a close representation of the toughness behavior of natural architectures relying on the localized heterogeneity. Given the critical embedment length of fiber reinforcement, extraordinary improvement has been attained not only in the strength but also in toughness taking advantage of the synergy effect from the aforementioned nature-inspired features. Indeed, the addition of a small amount of short fiber to the brittle bio-filaments results in a noticeable increase of more than 200% in the tensile strength and modulus with further elongation increment. This article highlights the inherent structural hierarchy of 3D-printed composites and the relevant sophisticated mechanism for anomalous mechanical reinforcement.

SUBMITTER: Yu S

PROVIDER: S-EPMC8787430 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Interfacial Transcrystallization and Mechanical Performance of 3D-Printed Fully Recyclable Continuous Fiber Self-Reinforced Composites.

Project description:To fully exploit the preponderance of three-dimensional (3D)-printed, continuous, fiber-reinforced, thermoplastic composites (CFRTPCs) and self-reinforced composites (which exhibit excellent interfacial affinity and are fully recyclable), an approach in which continuous fiber self-reinforced composites (CFSRCs) can be fabricated by 3D printing is proposed. The influence of 3D-printing temperature on the mechanical performance of 3D-printed CFSRCs based on homogeneous, continuous, ultra-high-molecular-weight polyethylene (UHMWPE) fibers and high-density polyethylene (HDPE) filament, utilized as a reinforcing phase and matrix, respectively, was studied. Experimental results showed a qualitative relationship between the printing temperature and the mechanical properties. The ultimate tensile strength, as well as Young's modulus, were 300.2 MPa and 8.2 GPa, respectively. Furthermore, transcrystallization that occurred in the process of 3D printing resulted in an interface between fibers and the matrix. Finally, the recyclability of 3D-printed CFSRCs has also been demonstrated in this research for potential applications of green composites.

| S-EPMC8471758 | biostudies-literature

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication.

Project description:Recent development in the field of additive manufacturing, also known as three-dimensional (3D) printing, has allowed for the incorporation of continuous fiber reinforcement into 3D-printed polymer parts. These fiber reinforcements allow for the improvement of the mechanical properties, but compared to traditionally produced composite materials, the fiber volume fraction often remains low. This study aims to evaluate the in-nozzle impregnation of continuous aramid fiber reinforcement with glycol-modified polyethylene terephthalate (PETG) using a modified, low-cost, tabletop 3D printer. We analyze how dimensional printing parameters such as layer height and line width affect the fiber volume fraction and fiber dispersion in printed composites. By varying these parameters, unidirectional specimens are printed that have an inner structure going from an array-like to a continuous layered-like structure with fiber loading between 20 and 45 vol%. The inner structure was analyzed by optical microscopy and Computed Tomography (µCT), achieving new insights into the structural composition of printed composites. The printed composites show good fiber alignment and the tensile modulus in the fiber direction increased from 2.2 GPa (non-reinforced) to 33 GPa (45 vol%), while the flexural modulus in the fiber direction increased from 1.6 GPa (non-reinforced) to 27 GPa (45 vol%). The continuous 3D reinforced specimens have quality and properties in the range of traditional composite materials produced by hand lay-up techniques, far exceeding the performance of typical bulk 3D-printed polymers. Hence, this technique has potential for the low-cost additive manufacturing of small, intricate parts with substantial mechanical performance, or parts of which only a small number is needed.

| S-EPMC8778918 | biostudies-literature

Efficient Toughening of Short-Fiber Composites Using Weak Magnetic Fields.

Project description:Short fibers may serve as toughening agents of composite materials because of the high energy dissipated during fracture, associated with numerous fiber pullouts. An ongoing challenge is to improve their toughness even further, by directing and concentrating fibers near highly stressed structural regions. Weak magnetic fields are utilized to increase the fracture toughness of an epoxy matrix reinforced by short magnetized glass fibers by directing and concentrating fibers near highly stressed structural regions. The orientation and local concentration of the fibers are controlled by the vector components of the magnetic field, and by the gradient in field intensity, respectively. Optimized fracture toughness was achieved by using two pairs of permanent magnets, combining enhanced concentration of fibers in the crack-tip vicinity with alignment of the fibers along the load direction. This optimized value was well above the reference fracture-toughness measured for composites with the same filler content in the absence of a magnetic field, as well as above the value achieved by exploiting unidirectional alignment, without fiber translation, using a solenoid. The method suggested in this study-localized reinforcement using magnetic translation of fillers through the formation of magnetic gradients-enables efficient and controllable improvement in the composite's overall resistance to fracture, without the involvement of additional phases or material.

| S-EPMC7288324 | biostudies-literature

Biomimetic composites with enhanced toughening using silk-inspired triblock proteins and aligned nanocellulose reinforcements.

Project description:Silk and cellulose are biopolymers that show strong potential as future sustainable materials. They also have complementary properties, suitable for combination in composite materials where cellulose would form the reinforcing component and silk the tough matrix. A major challenge concerns balancing structure and functional properties in the assembly process. We used recombinant proteins with triblock architecture, combining structurally modified spider silk with terminal cellulose affinity modules. Flow alignment of cellulose nanofibrils and triblock protein allowed continuous fiber production. Protein assembly involved phase separation into concentrated coacervates, with subsequent conformational switching from disordered structures into β sheets. This process gave the matrix a tough adhesiveness, forming a new composite material with high strength and stiffness combined with increased toughness. We show that versatile design possibilities in protein engineering enable new fully biological materials and emphasize the key role of controlled assembly at multiple length scales for realization.

| S-EPMC6744269 | biostudies-literature

The Effect of Temperature and Strain Rate on the Interfacial Behavior of Glass Fiber Reinforced Polypropylene Composites: A Molecular Dynamics Study.

Project description:To make better use of fiber reinforced polymer composites in automotive applications, a clearer knowledge of its interfacial properties under dynamic and thermal loadings is necessary. In the present study, the interfacial behavior of glass fiber reinforced polypropylene (PP) composites under different loading temperatures and strain rates were investigated via molecular dynamics simulation. The simulation results reveal that PP molecules move easily to fit tensile deformation at higher temperatures, resulting in a lower interfacial strength of glass fiber-PP interface. The interfacial strength is enhanced with increasing strain rate because the atoms do not have enough time to relax at higher strain rates. In addition, the non-bonded interaction energy plays a crucial role during the tensile deformation of composites. The damage evolution of glass fiber-PP interface follows Weibull's distribution. At elevated temperatures, tensile loading is more likely to cause cohesive failure because the mechanical property of PP is lower than that of the glass fiber-PP interface. However, at higher strain rates, the primary failure mode is interfacial failure because the strain rate dependency of PP is more pronounced than that of the glass fiber-PP interface. The relationship between the failure modes and loading conditions obtained by molecular dynamics simulation is consistent with the author's previous experimental studies.

| S-EPMC6918261 | biostudies-literature

Bone-inspired enhanced fracture toughness of de novo fiber reinforced composites.

Project description:Amplification in toughness and balance with stiffness and strength are fundamental characteristics of biological structural composites, and a long sought-after objective for engineering design. Nature achieves these properties through a combination of multiscale key features. Yet, emulating all these features into synthetic de novo materials is rather challenging. Here, we fine-tune manual lamination, to implement a newly designed bone-inspired structure into fiber-reinforced composites. An integrated approach, combining numerical simulations, ad hoc manufacturing techniques, and testing, yields a novel composite with enhanced fracture toughness and balance with stiffness and strength, offering an optimal lightweight material solution with better performance than conventional materials such as metals and alloys. The results also show how the new design significantly boosts the fracture toughness compared to a classic laminated composite, made of the same building blocks, also offering an optimal tradeoff with stiffness and strength. The predominant mechanism, responsible for the enhancement of fracture toughness in the new material, is the continuous deviation of the crack from a straight path, promoting large energy dissipation and preventing a catastrophic failure. The new insights resulting from this study can guide the design of de novo fiber-reinforced composites toward better mechanical performance to reach the level of synergy of their natural counterparts.

| S-EPMC6395722 | biostudies-literature

Utilization of Banana Fiber-Reinforced Hybrid Composites in the Sports Industry.

Project description:The sports industry is an ever-growing sector worldwide. With technological advancements in information technologies, the sports industry has merged with the entertainment industry, reaching and influencing billions of people globally. However, to ensure and advance the safety, security, and sustainability of the sports industry, technological innovations are always needed in several manufacturing and materials processes to achieve cost-effectiveness, efficiency, durability, reusability, and recyclability of products used in this industry. For example, 90% of the field hockey equipment produced in the world comes from Sialkot, Pakistan. Most export quality field hockey equipment is currently produced via reinforcement of glass/carbon fibers in epoxy resin. The current study aimed to introduce new materials for field hockey equipment to reduce manufacturing costs and the environmental impact of synthetic materials, without comprising the quality of the final product. Our literature review on natural fibers revealed that they offer excellent and compatible mechanical properties. Based on extensive experimental studies, we concluded that banana fiber reinforced hybrid composites could be an alternative to pure glass fiber reinforced composites, with comparable and even higher load withstanding capabilities. Using banana fiber reinforced hybrid composites for the fabrication of hockey products would cut costs and lower the environmental impact stemming from the uses of biodegradable organic materials. It will also lead to the development of a domestic economy based on domestic resources.

| S-EPMC7411865 | biostudies-literature

Mechanism and Catalysis of Oxidative Degradation of Fiber-Reinforced Epoxy Composites.

Project description:Carbon fiber-reinforced polymer (CFRP) materials are widely used in aerospace and recreational equipment, but there is no efficient procedure for their end-of-life recycling. Ongoing work in the chemistry and engineering communities emphasizes recovering carbon fibers from such waste streams by dissolving or destroying the polymer binding. By contrast, our goal is to depolymerize amine-cured epoxy CFRP composites catalytically, thus enabling not only isolation of high-value carbon fibers, but simultaneously opening an approach to recovery of small molecule monomers that can be used to regenerate precursors to new composite resin. To do so will require understanding of the molecular mechanism(s) of such degradation sequences. Prior work has shown the utility of hydrogen peroxide as a reagent to affect epoxy matrix decomposition [1]. Herein we describe the chemical transformations involved in that sequence: the reaction proceeds by oxygen atom transfer to the polymer's linking aniline group, forming an N-oxide intermediate. The polymer is then cleaved by an elimination and hydrolysis sequence. We find that elimination is the slower step. Scandium trichloride is an efficient catalyst for this step, reducing reaction time in homogeneous model systems and neat cured matrix blocks. The conditions can be applied to composed composite materials, from which pristine carbon fibers can be recovered.

| S-EPMC6166884 | biostudies-literature

Short fiber reinforced 3d printed ceramic composite with shear induced alignment.

Project description:This paper accounts for utilization of shear induced alignment method during ceramic stereolithography. Lateral oscillation mechanism, combined with 3d printed wall pattern, was employed to generate necessary shear to align fiber in desired direction. First, semicircular channel pattern was printed to assess the effect of difference between wall direction and oscillation direction on the fiber alignment. Then, flexural strength of ceramic matrix was tested with nickel coated carbon fiber and ceramic fiber reinforcements. The results demonstrated that the shear induced alignment further improves the flexural strength compare to randomly distributed samples. Flexural strength of aligned samples with 1.0 wt% carbon fiber loading was improved by ~90% compared to randomly orientated samples and by ~333% compared to unreinforced samples. Finally, fracture surface morphology of the flexural strength test specimens was evaluated. The main fracture mechanism was observed as fiber pull-out.

| S-EPMC6191193 | biostudies-literature

Mechanical Properties and Synergistic Interfacial Interactions of ZnO Nanorod-Reinforced Polyamide-Imide Composites.

Project description:Metal oxide nanoparticle -reinforced polymers have received considerable attention due to their favorable mechanical properties compared to neat materials. However, the effect of nanoscale reinforcements of the interface on the composites' mechanical properties has not been investigated in-depth to reach their optimal performance in structural applications. Aiming at revealing the effect of synergistic interfacial interactions on the mechanical properties of polymer composites, using a nanoscale reinforcement, herein, a series of zinc oxide nanorod-reinforced polyamide-imide (PAI)/ZnO) composites were fabricated and their mechanical properties and viscoelastic responses were investigated. The composite prepared by reinforcing them with 5 wt % ZnO nanorods resulted in improved elastic modulus, stiffness, and hardness values by 32%, 14% and 35%, respectively, compared to neat polymer thin films. The viscoelastic dynamics of the composites revealed that there was an 11% increase in elastic wave speed in the composite, containing 5 wt % ZnO nanorods, indicating better response to high impacts. Delayed viscoelastic response decreased by 67% spatially and 51% temporally, with a corresponding decrease in the creep rate, for the 5 wt % ZnO nanorod- containing composite, evidencing its potential applicability in high strength lightweight structures. The improved mechanical properties with respect to the filler concentration evidence strong particle-polymer interfacial interactions, creating "chain-bound" clusters, providing clear reinforcement and polymer chain mobility retardation. However, hypervelocity impact testing revealed that all the composites' films were vulnerable to hypervelocity impact, but the spallation region of the composite films reinforced with 2.5 wt % and 5 wt % ZnO nanorods exhibited a cellular-like matrix with shock-induced voids compared to a rather hardened spallation region with cracks in the neat film.

| S-EPMC10055968 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data