Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical CO₂ Reduction Reaction over Cu Nanoparticles with Tunable Activity and Selectivity Mediated by Functional Groups in Polymeric Binder.

ABSTRACT: The electrochemical carbon dioxide reduction reaction (CO₂RR) using copper (Cu)-based catalysts has received significant attention mainly because Cu is an element capable of producing hydrocarbons and oxygenates. One possible way to control the CO₂RR performance at the electrode interface is by modifying catalysts with specific functional groups of different polymeric binders, which are necessary components in the process of electrode fabrication. However, the modification effect of the key functional groups on the CO₂RR activity and selectivity is poorly understood over Cu-based catalysts. In this work, the role of functional groups (e.g., -COOH and -CF₂ groups) in hydrophilic and hydrophobic polymeric binders on the CO₂RR of Cu-based catalysts is investigated using a combination of electrochemical measurements, in situ characterization, and density functional theory (DFT) calculations. DFT results reveal that functional groups influence the binding energies of key intermediates involved in both CO₂RR and the competing hydrogen evolution reaction, consistent with experimental observation of binder-dependent product distributions among formic acid, CO, CH₄, and H₂. This study provides a fundamental understanding that the selection of desired polymeric binders is a useful strategy for tuning the CO₂RR activity and selectivity.

SUBMITTER: Chang Q

PROVIDER: S-EPMC8790809 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cu-Sn Aerogels for Electrochemical CO2 Reduction with High CO Selectivity.

Project description:This work reports the synthesis of CuxSny alloy aerogels for electrochemical CO2 reduction catalysts. An in situ reduction and the subsequent freeze-drying process can successfully give CnxSny aerogels with tuneable Sn contents, and such aerogels are composed of three-dimensional architectures made from inter-connected fine nanoparticles with pores as the channels. Density functional theory (DFT) calculations show that the introduction of Sn in Cu aerogels inhibits H2 evolution reaction (HER) activity, while the accelerated CO desorption on the catalyst surface is found at the same time. The porous structure of aerogel also favors exposing more active sites. Counting these together, with the optimized composition of Cu95Sn5 aerogel, the high selectivity of CO can be achieved with a faradaic efficiency of over 90% in a wide potential range (-0.7 V to -1.0 V vs. RHE).

| S-EPMC9919718 | biostudies-literature

Electronic Effects Determine the Selectivity of Planar Au-Cu Bimetallic Thin Films for Electrochemical CO2 Reduction.

Project description:Au-Cu bimetallic thin films with controlled composition were fabricated by magnetron sputtering co-deposition, and their performance for the electrocatalytic reduction of CO2 was investigated. The uniform planar morphology served as a platform to evaluate the electronic effect isolated from morphological effects while minimizing geometric contributions. The catalytic selectivity and activity of Au-Cu alloys was found to be correlated with the variation of electronic structure that was varied with tunable composition. Notably, the d-band center gradually shifted away from the Fermi level with increasing Au atomic ratio, leading to a weakened binding energy of *CO, which is consistent with low CO coverage observed in CO stripping experiments. The decrease in the *CO binding strength results in the enhanced catalytic activity for CO formation with the increase in Au content. In addition, it was observed that copper oxide/hydroxide species are less stable on Au-Cu surfaces compared to those on the pure Cu surface, where the surface oxophilicity could be critical to tuning the binding strength of *OCHO. These results imply that the altered electronic structure could explain the decreased formation of HCOO- on the Au-Cu alloys. In general, the formation of CO and HCOO- as main CO2 reduction products on planar Au-Cu alloys followed the shift of the d-band center, which indicates that the electronic effect is the major governing factor for the electrocatalytic activity of CO2 reduction on Au-Cu bimetallic thin films.

| S-EPMC6509640 | biostudies-literature

Structure-activity relationship of Cu-based catalysts for the highly efficient CO2 electrochemical reduction reaction.

Project description:Electrocatalytic carbon dioxide reduction (CO2RR) is a relatively feasible method to reduce the atmospheric concentration of CO2. Although a series of metal-based catalysts have gained interest for CO2RR, understanding the structure-activity relationship for Cu-based catalysts remains a great challenge. Herein, three Cu-based catalysts with different sizes and compositions (Cu@CNTs, Cu4@CNTs, and CuNi3@CNTs) were designed to explore this relationship by density functional theory (DFT). The calculation results show a higher degree of CO2 molecule activation on CuNi3@CNTs compared to that on Cu@CNTs and Cu4@CNTs. The methane (CH4) molecule is produced on both Cu@CNTs and CuNi3@CNTs, while carbon monoxide (CO) is synthesized on Cu4@CNTs. The Cu@CNTs showed higher activity for CH4 production with a low overpotential value of 0.36 V compared to CuNi3@CNTs (0.60 V), with *CHO formation considered the potential-determining step (PDS). The overpotential value was only 0.02 V for *CO formation on the Cu4@CNTs, and *COOH formation was the PDS. The limiting potential difference analysis with the hydrogen evolution reaction (HER) indicated that the Cu@CNTs exhibited the highest selectivity of CH4 among the three catalysts. Therefore, the sizes and compositions of Cu-based catalysts greatly influence CO2RR activity and selectivity. This study provides an innovative insight into the theoretical explanation of the origin of the size and composition effects to inform the design of highly efficient electrocatalysts.

| S-EPMC9947715 | biostudies-literature

Ultrasound-boosted selectivity of CO in CO2 electrochemical reduction.

Project description:Among the possible products of CO2 electrochemical reduction, CO plays a unique and vital role, which can be an ideal feedstock for further reduction to C2+ products, and also the important component of syngas that can be used as feedstock for value-added chemicals and fuels. However, it is still a challenge to tune the CO selectivity on Cu electrode. Here we newly construct an ultrasound-assisted electrochemical method for CO2 reduction, which can tune the selectivity of CO2 to CO from less than 10% to >80% at -1.18 V versus (vs.) reversible hydrogen electrode (RHE). The partial current density of CO production is significantly improved by 15 times. By in-situ Raman study, the dominating factor for the improved CO production is attributed to the accelerated desorption of *CO intermediate. This work provides a facile method to tune the product selectivity in CO2 electrochemical reduction.

| S-EPMC8213958 | biostudies-literature

Highly Selective Electrochemical Reduction of CO2 into Methane on Nanotwinned Cu.

Project description:The electrochemical carbon dioxide reduction reaction (CO2RR) is a promising route to close the carbon cycle by reducing CO2 into valuable fuels and chemicals. Electrocatalysts with high selectivity toward a single product are economically desirable yet challenging to achieve. Herein, we demonstrated a highly (111)-oriented Cu foil electrocatalyst with dense twin boundaries (TB) (tw-Cu) that showed a high Faradaic efficiency of 86.1 ± 5.3% toward CH4 at -1.2 ± 0.02 V vs the reversible hydrogen electrode. Theoretical studies suggested that tw-Cu can significantly lower the reduction barrier for the rate-determining hydrogenation of CO compared to planar Cu(111) under working conditions, which suppressed the competing C-C coupling, leading to the experimentally observed high CH4 selectivity.

| S-EPMC10141442 | biostudies-literature

Facet-Dependent Selectivity of Cu Catalysts in Electrochemical CO2 Reduction at Commercially Viable Current Densities.

Project description:Despite substantial progress in the electrochemical conversion of CO2 into value-added chemicals, the translation of fundamental studies into commercially relevant conditions requires additional efforts. Here, we study the catalytic properties of tailored Cu nanocatalysts under commercially relevant current densities in a gas-fed flow cell. We demonstrate that their facet-dependent selectivity is retained in this device configuration with the advantage of further suppressing hydrogen production and increasing the faradaic efficiencies toward the CO2 reduction products compared to a conventional H-cell. The combined catalyst and system effects result in state-of-the art product selectivity at high current densities (in the range 100-300 mA/cm2) and at relatively low applied potential (as low as -0.65 V vs RHE). Cu cubes reach an ethylene selectivity of up to 57% with a corresponding mass activity of 700 mA/mg, and Cu octahedra reach a methane selectivity of up to 51% with a corresponding mass activity of 1.45 A/mg in 1 M KOH.

| S-EPMC7199425 | biostudies-literature

Temperature promotes selectivity during electrochemical CO2 reduction on NiO:SnO2 nanofibers.

Project description:Electrolyzers operate over a range of temperatures; hence, it is crucial to design electrocatalysts that do not compromise the product distribution unless temperature can promote selectivity. This work reports a synthetic approach based on electrospinning to produce NiO:SnO2 nanofibers (NFs) for selectively reducing CO2 to formate above room temperature. The NFs comprise compact but disjoined NiO and SnO2 nanocrystals identified with STEM. The results are attributed to the segregation of NiO and SnO2 confirmed with XRD. The NFs are evaluated for the CO2 reduction reaction (CO2RR) over various temperatures (25, 30, 35, and 40 °C). The highest faradaic efficiencies to formate (FEHCOO- ) are reached by NiO:SnO2 NFs containing 50% of NiO and 50% SnO2 (NiOSnO50NF), and 25% of NiO and 75% SnO2 (NiOSnO75NF), at an electroreduction temperature of 40 °C. At 40 °C, product distribution is assessed with in situ differential electrochemical mass spectrometry (DEMS), recognizing methane and other species, like formate, hydrogen, and carbon monoxide, identified in an electrochemical flow cell. XPS and EELS unveiled the FEHCOO- variations due to a synergistic effect between Ni and Sn. DFT-based calculations reveal the superior thermodynamic stability of Ni-containing SnO2 systems towards CO2RR over the pure oxide systems. Furthermore, computational surface Pourbaix diagrams showed that the presence of Ni as a surface dopant increases the reduction of the SnO2 surface and enables the production of formate. Our results highlight the synergy between NiO and SnO2, which can promote the electroreduction of CO2 at temperatures above room temperature.

| S-EPMC11363033 | biostudies-literature

Kinetic Understanding of Catalytic Selectivity and Product Distribution of Electrochemical Carbon Dioxide Reduction Reaction.

Project description:CO2 can be electrochemically reduced to different products depending on the nature of catalysts. In this work, we report comprehensive kinetic studies on catalytic selectivity and product distribution of the CO2 reduction reaction on various metal surfaces. The influences on reaction kinetics can be clearly analyzed from the variation of reaction driving force (binding energy difference) and reaction resistance (reorganization energy). Moreover, the CO2RR product distributions are further affected by external factors such as electrode potential and solution pH. A potential-mediated mechanism is found to determine the competing two-electron reduction products of CO2 that shifts from thermodynamics-controlled product formic acid at less negative electrode potentials to kinetic-controlled product CO at more negative electrode potentials. Based on detailed kinetic simulations, a three-parameter descriptor is applied to identify the catalytic selectivity of CO, formate, hydrocarbons/alcohols, as well as side product H2. The present kinetic study not only well explains the catalytic selectivity and product distribution of experimental results but also provides a fast way for catalyst screening.

| S-EPMC10052237 | biostudies-literature

Hydroxyl radicals dominate reoxidation of oxide-derived Cu in electrochemical CO2 reduction.

Project description:Cuδ+ sites on the surface of oxide-derived copper (OD-Cu) are of vital importance in electrochemical CO2 reduction reaction (CO2RR). However, the underlying reason for the dynamically existing Cuδ+ species, although thermodynamically unstable under reductive CO2RR conditions, remains uncovered. Here, by using electron paramagnetic resonance, we identify the highly oxidative hydroxyl radicals (OH•) formed at room temperature in HCO3- solutions. In combination with in situ Raman spectroscopy, secondary ion mass spectrometry, and isotope-labelling, we demonstrate a dynamic reduction/reoxidation behavior at the surface of OD-Cu and reveal that the fast oxygen exchange between HCO3- and H2O provides oxygen sources for the formation of OH• radicals. In addition, their continuous generations can cause spontaneous oxidation of Cu electrodes and produce surface CuOx species. Significantly, this work suggests that there is a "seesaw-effect" between the cathodic reduction and the OH•-induced reoxidation, determining the chemical state and content of Cuδ+ species in CO2RR. This insight is supposed to thrust an understanding of the crucial role of electrolytes in CO2RR.

| S-EPMC9237086 | biostudies-literature

Electrochemical reduction of CO2 to ethylene on Cu/Cu x O-GO composites in aqueous solution.

Project description:Here, we present fabrication of Graphene oxide (GO) supported Cu/Cu x O nano-electrodeposits which can efficiently and selectively electroreduce CO2 into ethylene with a faradaic efficiency (F.E) of 34% and a conversion rate of 194 mmol g-1 h-1 at -0.985 V vs. RHE. The effect of catalyst morphology, working electrode fabricational techniques, the extent of metal-GO interaction and the oxide content in Cu/Cu x O, was studied in detail so as to develop a protocol for the fabrication of an active, stable and selective catalyst for efficient electro-production of ethylene from CO2. Moreover, a detailed comparative study about the effect of the GO support, and the nature of the cathodic collection substrate used for the electro-deposition is presented.

| S-EPMC9053623 | biostudies-literature